Dependence of Elution Curve and Adsorption Isotherms of Insulin on composition of Mobile Phase of Frontal Analysis in Reversed Phase Liquid Chromatography

With frontal analysis(FA),the dependence of adsorption isotherms of insulin on the composition of mobile phase in reversed phase liquid chromatography (RPLC) has been investigated,This is also a good example to employ the stoichiometric displacement theory (SDT) for ivestigating solute adsorption in physical chemistry.Six kinds of mobile phase in RPLC were employed to study the effects on the elution curves and adsorption isotherms of insulin.the key points of this paper are:(1) the stability of insulin due to delay time after preparing,the organic solvent concentration,the kind and the concentration of ion-pairing agent in mobile phase were found to affect both elution curve and adsorption isotherm very seriously.(2)To obtain a valid and comparable result,the composition of the mobile phase employed in FA must be as same as possible to that in usual RPLC of either analytical scale or preparative purpose.(3)Langmuir Equation and the SDT were employed to imitate these obtained adsorption isotherms.The expression for solute adsorption from solution of the SDT was found to have a better elucidation to the insulin adsorption from mobile phase in RPLC.     

Palladium-catalyzed amination of aryl bromides with hindered N-alkyl-substituted anilines using a palladium(I) tri-tert-butylphosphine bromide dimer

An efficient palladium-catalyzed amination of aromatic bromides with hindered N-alkyl-substituted anilines is described, either using the combination of Pd(OAc)(2) and P(t-Bu)(3) or a palladium(I) tri-tert-butylphosphine bromide dimer, [Pd(mu-Br)(t-Bu(3)P)](2), a new, commercially available, and easily handled catalyst.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

IMPACT PROPERTIES OF METALLOCENE - CATALYZED ETHYLENE-α-OLEFIN COPOLYMERS

The impact properties of two selected metallocene-catalyzed ethylene-butene copolymers and one conventionalcopolymer were evaluated using Izod impact test. It is found that the metallocene-catalyzed copolymer shows superior impactproperties. This result was explained on the basis of the more homogeneous inter-molecular composition distribution andnarrower molecular weight distribution, which leads to more homogeneous morphology with fewer defects. Stepwisecrystallization improves the impact properties, especially in the crack propagation process, to a large extent. This is due to thedecrease of entanglements by stepwise crystallization, which is advantageous for the chain slip and shear. The polymer withheterogeneous intra-molecular composition distribution exhibits a more evident improvement of impact properties understepwise crystallization.     

苯乙烯-4-甲基丙烯酰氧-2.2.6.6-四甲基哌啶共聚物的250兆赫~1H-核磁共振研究

本文用250兆赫~1H-核磁共振技术研究了苯乙烯(S)-4-甲基丙烯酰氧-2、2.6.6-四甲基哌啶(M)自由基引发聚合的共聚物的组分比和微结构,定量测定了以M为中心的三元组分布。由此确认该共聚体系属于一级马尔可夫链模型,并确定了单体竞聚率常数,r_M=0.32,r_S=0.60。对苯乙烯含量较多的共聚物还定量估计了以S为中心的三元组分布,与理论上计算结果有很好的一致性。     

Angular distributions of photoelectrons in resonantly enhanced multiphoto ionization via the 7s[1 1/2]0 1 and 8s[1 1/2]0 1 states of Xe

Photoelectron angular distributions have been measured for the three-photon resonant one-photon ionization, (3+1), of Xe via the 7s[1 1/2]⁰ ₁ and 8s[1 1/2]⁰ ₁ states. The results are in good agreement with the theoretical predictions of Tang and Lambropoulos [13] for the 8s[1 1/2]⁰ ₁, but not for the 7s[1 1/2]⁰ ₁ state. Furthermore, the results are compared to those which have been obtained by Blazewicz et al. [1] for the three-photon resonant two-photon ionization, (3+2), of Xe via the 6s[1 1/2]⁰ ₁ state.     

树枝状大分子催化剂的研究进展

回顾了功能树枝状大分子在催化作用领域的研究成就，重点就活性中心在核附 近的树枝状大分子和表面含催化官能团的树枝状大分子的结构与催化作用进行了讨 论，并对其应用前景进行了展望。     

键连接性指数的建构及其在有机体系中的应用研究

以化学键为基础建构了键连接性指数及分子键连接性指数，该指数同时考虑顶 点原子的化学特征及键的性质．对于任意化学键，键连接性指数Si＝1+△I/R·[（ Z1-h1)m2/n1+(Z2-h2)m1/n2]，分子键连接性指数S为∑i=1^m√Si或∑i=1^m1/√ Si，其中，Z1，Z2为化学键键连原子的价电子数；n1，n2成键原子的价层最高主量 子数；m1，m2为成键原子的氧化数；h1，h2为与成键原子相连的氢原子个数；△I 为成键原子的电负性差(△I≥0)；R为化学键的相对键长．与以顶点为基础的价连 接性指数不同，该指数不仅能方便而有效地应用于饱和碳氢体系亦能有效地应用于 含多重键的不饱和体系及含杂原子的有机体系．研究了饱和碳氢体系标准生成焓， 不饱和碳氢体系和酮、醚、酯体系在水中的溶解度和辛醇/水分配系数，卤代甲烷 体系的标准生成焓，卤代苯体系辛醇/水分配系数，均取得比较满意的结果。     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

Di‐2‐pyridyl ketone N4,N4‐(butane‐1,4‐diyl)thiosemicarbazone

The title compound, C₁₆H₁₇N₅S, is in the thione form and crystallizes with two independent mol­ecules in the asymmetric unit. In both mol­ecules, the penta­methyl­ene­imine five‐membered ring adopts an envelope conformation, and in one of the molecules this ring shows positional disorder. The thione S and hydrazine N atoms are in the Z configuration with respect to the C—N bond.