质子辐照不锈钢中氢气泡产生和演化研究

采用质子辐照模拟方法和正电子湮没寿命测量方法研究了质子辐照在国产改进型316L不锈钢中产生的氢气泡及其随辐照质子注量的演化过程。5×10^12,5×10^13,5×10^14／cm^2质子辐照的实验结果表明,辐照在不锈钢中产生氢气泡的尺度随辐照质子注量增加而增大,在质子注量为5×10^14／cm^2时氢气泡尺寸达到0．62nm,气泡的浓度随质子注量增加而减小。The bubble production and evolution in the home-made modified 316L stainless steel have been investigated by the proton irradiation simulation technique and the positron annihilation lifetime measurement. The experimental results of 5 × 10^12, 5 × 10^13 and 5 × 10^14/cm^2 proton irradiations show that the produced bubble size increases, while the bubble concentration decreases, with the increasing of the irradiation proton flueence. At the proton irradiation fluence of 5 × 10^14/cm^2 the bubble size reaches 0.62 nm.     

Effective dimensionality approach to the RKKY interaction in multilayer systems

We consider RKKY interaction in a quasi 2D system with nonparabolic dispersion. In our paper we calculate the RKKY range function assuming the in-layer confinement via effective dimensionality approach. We show, that indirect magnetic exchange in our system can be modelled by the effective spectral dimension which equals one.     

CMS physics overview

The principal physics goals of the Compact Muon Solenoid experiment under construction at the Large Hadron Collider at CERN in Geneva are reviewed. Procedures to search for the Standard Model Higgs boson, supersymmetric Higgses and other supersymmetric particles are described.     

Measurement of the spin structure function <Emphasis Type="Italic">g</Emphasis><Subscript>1</Subscript> at HERMES

New, preliminary results are presented for the deuteron structure function g ₁ ^d , where the kinematic range has been extended to 0.0021<x<0.85 and Q ²>0.1 GeV², to include 7 new data points at low x with respect to previously released results. Within the present statistics, the structure function ratio g ₁ ^d /F ₁ ^d is found to be independent of Q ².     

低电阻测量设计实验中电位差计指针不稳的解决方法

本文分析了J33Q型电位差计在实验中指针不稳的原因,并提出了解决的办法。     

Visualization of concentration field in a vortex ring using acetone PLIF

To improve the understanding of flame propagation through a nonpremixed vortex ring, the characteristics of fuel concentration in a vortex ring have been investigated experimentally. The vortex ring was generated by the ejection of propane with a single stroke motion of a speaker. Planar laser-induced fluorescence (PLIF) technique was adopted by seeding acetone as a tracer to fuel stream, in which the PLIF signal intensity is directly proportional to the concentration of acetone. This technique provides non-intrusive and instantaneous measurement of concentration field. Results showed that fuel concentration and its gradient decreased with the evolution of a vortex ring. When a nonpremixed flame propagated through a vortex ring, the flame location coincides with the inner most spiral mixing layer of fuel and air in a vortex ring.     

Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

为学生打开自主学习的空间--一个高中物理教学案例与思考

现在，整个教育界都在提倡创新教育和自主探究式学习．笔者曾经尝试着在课堂上渗透让学生自主学习的思想，努力创设情景给学生多一些创新的机会，允许并鼓励他们在课堂上提出自己的看法．但课堂教学，特别是在目前仍受考试压力影响的高中课堂中，教师和学生依然面临着升学压力．无奈的现实很难在课堂上落实这些“理念”．毕竟学生这么多、课时这么少、教学任务又如此之重，作出一个教学决定又要考虑方方面面的因素，