Structural transformation of LiVOPO4 to Li3V2(PO4)3 with enhanced capacity

In the present investigation, we report the transformation of alpha-LiVOPO 4 to alpha-Li 3V 2(PO 4) 3, leading to an enhancement of capacity. The alpha-LiVOPO 4 sample was synthesized by a sol-gel method, followed by sintering at 550-650 degrees C in a flow of 5% H 2/Ar. The structural transformation of a triclinic alpha-LiVOPO 4 structure to a monoclinic alpha-Li 3V 2(PO 4) 3 structure was observed at higher sintering temperatures (700-800 degrees C in a flow of 5% H 2/Ar). The alpha-Li 3V 2(PO 4) 3 phase was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis, and X-ray absorption near edge spectrum (XANES) techniques. The valence shift of vanadium ions from +4 to +3 states was observed using in situ XANES experiments at V K-edge. The structural transformation is ascertained by the shape changes in pre-edge and near edge area of X-ray absorption spectrum. It was observed that the capacity was enhanced from 140 mAh/g to 164 mAh/g via structural transformation process of LiVOPO 4 to Li 3V 2(PO 4) 3.     

Continuous flow microfluidic device for cell separation, cell lysis and DNA purification

A novel integrated microfluidic device that consisted of microfilter, micromixer, micropillar array, microweir, microchannel, microchamber, and porous matrix was developed to perform sample pre-treatment of whole blood. Cell separation, cell lysis and DNA purification were performed in this miniaturized device during a continuous flow process. Crossflow filtration was proposed to separate blood cells, which could successfully avoid clogging or jamming. After blood cells were lyzed in guanidine buffer, genomic DNA in white blood cells was released and adsorbed on porous matrix fabricated by anodizing silicon in HF/ethanol electrolyte. The flow process of solutions was simulated and optimized. The anodization process of porous matrix was also studied. Using the continuous flow procedure of cell separation, cell lysis and DNA adsorption, average 35.7 ng genomic DNA was purified on the integrated microfluidic device from 1 μL rat whole blood. Comparison with a commercial centrifuge method, the miniaturized device can extract comparable amounts of PCR-amplifiable DNA in 50 min. The greatest potential of this integrated miniaturized device was illustrated by pre-treating whole blood sample, where eventual integration of sample preparation, PCR, and separation on a single device could potentially enable complete detection in the fields of point-of-care genetic analysis, environmental testing, and biological warfare agent detection.     

Hydrogen bond directed synthesis of pyridazine and naphthyridine containing macrocycles

This work describes a high-yielding, one-step synthesis of pyrizadine and naphthyridine containing macrocycles directed by intramolecular H-bonding.     

Density functional theory study of the role of anions on the oxidative decomposition reaction of propylene carbonate

The oxidative decomposition mechanism of the lithium battery electrolyte solvent propylene carbonate (PC) with and without PF(6)(-) and ClO(4)(-) anions has been investigated using the density functional theory at the B3LYP/6-311++G(d) level. Calculations were performed in the gas phase (dielectric constant ε = 1) and employing the polarized continuum model with a dielectric constant ε = 20.5 to implicitly account for solvent effects. It has been found that the presence of PF(6)(-) and ClO(4)(-) anions significantly reduces PC oxidation stability, stabilizes the PC-anion oxidation decomposition products, and changes the order of the oxidation decomposition paths. The primary oxidative decomposition products of PC-PF(6)(-) and PC-ClO(4)(-) were CO(2) and acetone radical. Formation of HF and PF(5) was observed upon the initial step of PC-PF(6)(-) oxidation while HClO(4) formed during initial oxidation of PC-ClO(4)(-). The products from the less likely reaction paths included propanal, a polymer with fluorine and fluoro-alkanols for PC-PF(6)(-) decomposition, while acetic acid, carboxylic acid anhydrides, and Cl(-) were found among the decomposition products of PC-ClO(4)(-). The decomposition pathways with the lowest barrier for the oxidized PC-PF(6)(-) and PC-ClO(4)(-) complexes did not result in the incorporation of the fluorine from PF(6)(-) or ClO(4)(-) into the most probable reaction products despite anions and HF being involved in the decomposition mechanism; however, the pathway with the second lowest barrier for the PC-PF(6)(-) oxidative ring-opening resulted in a formation of fluoro-organic compounds, suggesting that these toxic compounds could form at elevated temperatures under oxidizing conditions.     

Synthesis and hetero-Diels-Alder reactions of (E)-α-perfluoroalkanesulfonyl-α,β-unsaturated ketones

Catalyzed by ammonium acetate, the Knoevenagel reactions of β-keto perfluoroalkanesulfones 1 with aromatic aldehydes 2 afforded α-perfluoroalkanesulfonyl-α,β-unsaturated ketones 4 in moderate to good yields. The possible mechanism for the reactions was proposed. These fluorine-containing α,β-unsaturated ketones, which are electron-poor 1-oxa-1,3-butadienes, could be used in inverse electron demand hetero Diels-Alder (HDA) reaction with electron-rich olefins to give tetrasubstituted dihydropyrans 6 in quantitative yields.     

Creating Ioffe-Pritchard micro-traps from permanent magnetic film with in-plane magnetization

We present designs for Ioffe-Pritchard type magnetic traps using planar patterns of hard magnetic material. Two samples with different pattern designs were produced by spark erosion of 40 μm thick FePt foil. The pattern on the first sample yields calculated axial and radial trap frequencies of 51 Hz and 6.8 kHz, respectively. For the second sample the calculated frequencies are 34 Hz and 11 kHz. The structures were used successfully as a magneto-optical trap for ⁸⁷Rb and loaded as a magnetic trap. A third design, based on lithographically patterned 250 nm thick FePt film on a Si substrate, yields an array of 19 traps with calculated axial and radial trap frequencies of 1.5 kHz and 110 kHz, respectively.     

Large-scale synthesis of sodium and potassium titanate nanobelts

A low-temperature solution-based synthetic method was developed for the large-scale synthesis of one-dimensional nanostructures of alkali titanates. Two kinds of highly pure ribbonlike titanates were synthesized successfully in gram quantities without introducing any templates or catalysts. The structure and composition of the titanates were characterized by XRD, HRTEM, and EDX. The chemical and physical properties were preliminarily characterized, and some distinctive properties were observed.     

Similarity-Invariant Subspaces and Similarity-Preserving Linear Maps

In this paper, the similarity-invariant subspaces of B(H), which is the Banach algebra of all bounded linear operators on a separable infinite-dimensional Hilbert space H, are completely characterized and the representations of bounded linear maps on B(H) which preserve similarity in both directions are given. Received November 3, 1999, Revised September 20, 2000, Accepted February 5, 2001