AN EXPLORATION OF STRUCTURALLY CHARACTERIZED HETERO-TRINUCLEAR [Cu(II)2Ca(II)] FLEXIBLE-BIS(SALAMO)-TYPE COMPLEX

Journal of Structural Chemistry - A new bis(salamo)-type ligand has been designed and synthesized, and its hetero-trinuclear [Cu(II)2Ca(II)] complex has been successfully prepared. It is...     

Study on Deformation of Polycrystalline Aluminum Alloy Using Moiré Interferometry

Polycrystalline aluminum alloy is manufactured by annealing, compared to the width of the specimen, the size of the grains can not be omitted, which makes the specimen anisotropic. Under uniaxial tension, the deformation field is inhomogeneous. In this study, moiré interferometry is successfully applied to measure the deformation of the polycrystalline specimen. The experimental results presented the stress versus strain responses of the marked grains in different orientations and different shapes. By using fringe centering method, the strain distributions under certain load in the centers and on the boundaries of the grains are analyzed.     

GPS误差模型参数估计的Hopfield神经网络方法

本文首先建立了ＧＰＳ误差模型。然后，利用Ｈｏｐｆｉｅｌｄ神经网络（ＨＮＮ）方法对误差模型参数进行了估计，并给出了其硬件实现方法。将估计结果与传统的最小二乘（ＬＳ）估计进行比较，证明了神经网络方法的有效性。     

复合材料梁Ⅱ型裂纹的有限元分析

对三点弯曲梁端部层间裂纹的Ⅱ型断裂性能进行了有限元分析。为克服裂纹面两岸节点相互嵌入问题，采用了界面元素，计算结果与理论预测进行了比较．     

有限元法在三轴转台机械系统设计中的应用

本文探讨了三轴转台机械系统的设计与计算问题，以惯性三轴测试转台和三轴模拟台为例，确定了多种运转状态下的有限元法计算模型，并对其进行了静、动态特性计算，比较分析了计算结果，为合理结构的设计提供了重要数据，说明了在三轴转台机械系统设计中有限元法的重要性     

The effect of axial stretch on cavitation in an elastic cylinder

The phenomenon of cavitation in an elastic cylinder subjected to a combined axial stretch λ_z and radial traction P is examined. One possible response of the cylinder to this loading, for all λ_z; and P, is a pure homogeneous deformation. However, for some materials, the homogeneous deformation becomes unstable at certain critical values of (λ_z, P), and a second deformation bifurcates from the homogeneous one; this latter deformation involves a cylindrical cavity co-axial with the elastic cylinder. We determine the values of (λ_z, P) at which this happens. The results are displayed by constructing a curve in the (λ_z, P)-plane which divides this plane into regions where the homogeneous deformation is stable and unstable.     

DYNAMIC SIMULATION ANALYSIS OF CAPTURE AND BUFFER SYSTEM BASED ON CLAW-TYPE DOCKING MECHANISM

现有在轨服务的对接机构由于其尺寸大、结构复杂、对接目标单一等局限性因素,无法很好地为后续我国探月工程任务提供有力支撑,且受限于运载能力,对接机构的轻量化也是必不可少的一项环节.为研究可服务于未来月球空间站以及载人登月等高轨道任务的对接机构,设计了一种新型抱爪式对接机构,其采用异体同构周边式构型,可以实现主/被动飞行器之间的互换.利用 V 型槽与爪钩等结构部件实现飞行器对接过程中的捕获以 及能量消耗功能,从而实现两飞行器之间的稳固联接.该对接机构具备尺寸小、重量轻、结构简单、功能易实现等优势. 对其捕获缓冲系统进行了动力学分析,计算了缓冲元器件的参数对其捕获性能的影响,在 ADAMS 完成了数字虚拟样机的建立,结合实际两种典型的对接初始条件工况进行了仿真研究.研究结果表明,两种工况下的对接过程能量消耗满足设计要求,能够以较小的 V 型槽的碰撞力完成捕获,结果证明了捕获缓冲系统的可行性以及该构型对接机构具备较好实现任务的能力.     

Effect of an inhibitor on high-speed turbulent flames and the transition to detonation

The influence of an inhibitor (CF₃Br or Halon 1301) on the propagation of high-speed turbulent flames, quasi-detonations and the transition to detonation has been investigated for methane-air, propane-air and acetylene-air mixtures. The experiments are carried out in a 13 m tube (15 cm diameter) filled with regularly spaced orifice plates (blockage ratio of 0.39) to ensure rapid flame acceleration. In all cases, the addition of the inhibitor reduces the turbulent flame velocity and extinguishes the flame with sufficient inhibitor concentration (2.7% and 7.5% for methane-air and propane-air, respectively). For acetylene-air mixtures, the quasi-detonation speed is progressively reduced with increasing inhibitor concentration and eventually causes the failure of the quasi-detonation and transition back to a fast turbulent flame. The inhibitor also narrows the propagation limits in all cases. To elucidate the inhibition mechanism, detailed modelling of both the turbulent flame structure as well as the chemical kinetics are required.     

Determination of the complex shear modulus of structural adhesives using a doubly clamped sandwich beam

A method is described for calculating the complex shear modulus of structural adhesives from dynamic test data on a doubly clamped sandwich beam in which the adhesive is contained as a thin layer. The accuracy of the technique is validated by finite-element analysis. Values of modulus obtained using the doubly clamped beam technique are found to be in excellent agreement with values obtained from dynamic tests on bulk specimens of an epoxy adhesive.     

阻抗式和简单调压室甩荷时水位波动的显式计算方法

目前对调压室水位波动的研究主要有图解法和数值计算。尚未看到考虑阻力项后调压室水位波动随时间变化的显函数计算方法。本文从调压室的基本微分方程出发，采用泰勒级数展开式推导了阻抗式和简单式调压室甩荷时水位波动的显式计算方法。运用这种方法不仅可以计算调压室水位波动的过程，而且可以方便的计算调压室的最高涌浪和第二振幅。