Microwave assisted hydrothermal synthesis of tin niobates nanosheets with high cycle stability as lithium-ion battery anodes

SnNb₂O₆ and Sn₂Nb₂O₇ nanosheets were synthetized via microwave assisted hydrothermal method, and innovatively employed as anode materials for lithium-ion battery. Compared with Sn₂Nb₂O₇ and the previously reported pure Sn-based anode materials, the SnNb₂O₆ electrode exhibited outstanding cycling performance.     

钽硫原子簇的形成及激光裂解的初步研究

报导用激光直接溅射的方法产生了大量的钽硫原子团簇离子Ta_nS_m~+(n≤9, m≤30),并用串级飞行时间质谱仪研究了所产生团簇离子的组成及紫外激光裂解规律。实验发现, 最稳定的团簇正离子往往具有Ta_nS_(2n+7)~+(n=1,2,…9)的组成, 相应的负离子具有, Ta_nS_(2n+3)~-(n=1,2,…9)的组成。各种团簇正离子的激光裂解的主要通道是连续的S_2消除过程, 且对于n=3,4,5的团簇, 主要光解产物还有Ta_3S_4~+或Ta_4S_6~+离子。据此推测出Ta_nS_m~+团簇离子的可能结构为在Ta原子周围有6个左右的S原子配位。Ta原子之间不存在直接的化学键,而较大团簇可能是以Ta_3S_4或Ta_4S_6为核心的结构。     

Preparative isolation and purification of coumarins from Peucedanum praeruptorum Dunn by high-speed counter-current chromatography

A preparative high-speed counter-current chromatography (HSCCC) method for isolation and purification of coumarins from Peucedanum praeruptorum Dunn (Baihuaqianhu in Chinese) was successfully established by using light petroleum-ethyl acetate-methanol-water as the two-phase solvent system in gradient elution mode. The upper phase of light petroleum-ethyl acetate-methanol-water (5:5:5:5, v/v) was used as the stationary phase of HSCCC. The mobile phase used in HSCCC was the lower phase of light petroleum-ethyl acetate-methanol-water (5:5:5:5, v/v) and light petroleum-ethyl acetate-methanol-water (5:5:6.5:3.5, v/v) that was changed in gradient. Four kinds of coumarins and another unknown compound were obtained and yielded 5.3 mg of qianhucoumarin D, 7.7 mg of Pd-Ib, 35.8 mg of (+)-praeruptorin A, 31.9 mg of (+)-praeruptorin B and 6.4 mg of unknown compound with the purity of 98.6%, 92.8%, 99.5%, 99.4% and 99.8% in one-step separation, respectively. The structures of the coumarins were identified by 1H NMR and 13C NMR.     

CH2(X 3B1)自由基与O2的反应

用时间分辨富里叶红外发射谱仪（ＴＲ－ＦＴＩＲＳ）研究了ＣＨ２（Ｘ＾３Ｂ１）自由基与Ｏ２反应的通道及产物的振动动态布居，基电子态自由基ＣＨ２（Ｘ＾３Ｂ１）由３５１ｎｍ紫外激光光解ＣＨ２ＣＯ生成，观测到振动发态反应产物ＣＯ（ｖ≤１０），ＣＯ２（ｖ３≤７）ＯＨ（Ｈ２Ｏ）和Ｈ２ＣＯ的红外发射，证实存在生成Ｈ２ＣＯ的通道，由光谱拟合得到不同时刻ＣＯ（ｖ）和ＣＯ２（ｖ３）的相对振动布居，发现ｖ＝４能级的布居数     

Synthesis of 1-[3-methyl-2(3H)-benzazolon-5- or 6-yl]-4-{4-[cis-2-(2,4-dichlorophenyl)-2-(1H-imidazol-1-yl-methyl)-1,3-dioxolan-4-yl]methyleneoxyphenyl}piperazines

Reactions of 3-methyl-6-[4-(4-hydroxyphenyl)-1-piperazinyl]-2(3H)-benzoxazolone, 3-methyl-6-[4-(4-hydroxy-phenyl)-1-piperazinyl]-2(3H)-benzothiazolone and 1,3-dimethyl-5-[4-(4-hydroxyphenyl)-1-piperazinyl]-2(3H)-benzimidazolone with cis-{[2-(2,4-dichlorophenyl) -2-(1H-imidazol-1-ylmethyl)]-1,3-dioxolan-4-yl}methyl meth-anesulfonate in the presence of sodium hydride furnish the title compounds.     

O(3P)原子和硅烷化学反应动力学研究

本文报道了用流动放电-化学发光技术测定O(~3P)和硅烷化学反应速率常数.在293—413K范围内, 结果为k=(1.05±0.36)×10~(-10)exp[(-3.06±0.10) kcal·mol~(-1) /RT] cm~3·molecule~(-1)·s~(-1)并用过渡态理论将上述实验结果外推到200—2000 K范围内. 计算结果以三参数公式表示为: k=7.67×10~(-19) T~(2.59) exp(-720 cal·mol~(-1)/RT) cm~3·molecule~(-1)·s~(-1).     

A bird nest-like manganese dioxide and its application as electrode in supercapacitors

A novel bird nest-like nanostructured MnO2(BNNS-MnO2) was prepared by a facile and cost-effective strategy. Their structures and morphologies were characterized by field emission scanning electron microscopy, transmission electron microscopy and powder X-ray diffraction. Capacitive behaviors were investigated by cyclic voltammetry and galvanostatic charge-discharge. The obtained nano-MnO2 possesses a well designed loose-assembled hierarchical nanoarchitecture with an appropriate crystallinity which gives rise to excellent performances as an electrode material for supercapacitors. A maximum specific capacitance of 917 F/g has been obtained at a current density of 5 mA/cm2 in 6 mol/L KOH aqueous solution, and a specific capacitance of 210 F/g has been maintained for 500 cycles. As the low cost of MnSO4 and KCr2O7 and the low reaction temperature, the present method avoids the requirements for complicated operations, time/energy-consuming and expensive reagents, and perhaps is ready for the industrialization of nano-MnO2 production.     

Adsorptive removal of nitrogen-containing compounds from fuel by metal-organic frameworks

The adsorptive denitrogenation from fuels over three metal-organic frameworks(MIL-96(Al),MIL-53(Al)and MIL-101(Cr))was studied by batch adsorption experiments.Four nitrogen-containing compounds(NCCs)pyridine,pyrrole,quinoline and indole were used as model NCCs in fuels to study the adsorption mechanism.The physicochemical properties of the adsorbents were characterized by XRD,N2physical adsorption,FT-IR spectrum and Hammett indicator method.The metal-organic frameworks(MOFs),especially the MIL-101(Cr)containing Lewis acid sites as well as high specific surface area,can adsorb large quantities of NCCs from fuels.In addition,the adsorptive capacity over MIL-101(Cr)will be different for NCCs with different basicity.The stronger basicity of the NCC is,the more it can be absorbed over MIL-101(Cr).Furthermore,pore size and shape also affect the adsorption capacity for a given adsorbate,which can be proved by the adsorption over MIL-53(Al)and MIL-96(Al).The pseudo-second-order kinetic model and Langmuir equation can be used to describe kinetics and thermodynamics of the adsorption process,respectively.Finally,the regeneration of the used adsorbent has been conducted successfully by just washing it with ethanol.     

A novel and simple pathway to synthesis of porous polyurea absorbent and its tests on dye adsorption and desorption

A novel one-step protocol for the preparation of porous polyurea material (PPU) through precipitation polymerization of toluene diisocynate (TDI) is presented. The process is based on step polymerization of one singlemonomer, TDI, with water in water-acetonemixed solvent. PPU is obtained without need for any porogen or additives, and no any chemical modification on the outcome polymer is necessary. The morphology, pore size and size distribution of PPU are characterized by scanning electron microscope and BET nitrogen adsorption. Taking acid fuchsine (AF) and Congo Red as dye examples in wastewaters, their adsorption on, desorption from PPU and the reusability of PPU were tested. Experimental conditions for AF adsorption were optimized with regard to pH, adsorption time, AF concentration and amount of PPU. Results demonstrate that the as-prepared PPU is of high performance in dyes adsorption and recycled use. This work presents therefore a novel and attractive candidate for removal of anionic dyes from wastewaters.