Numerical simulation on ionic wind in circular channels

Ionic wind induced by direct-current corona discharge has attracted considerable interest because of its low energy consumption, low noise emission, flexible designs, and lack of moving parts. The purpose of this study is to investigate the configuration parameters to improve the velocity of the ionic wind. Accordingly, this study develops a three-dimensional(3 D) model of circular tube with multi-needle-to-mesh electrode configurations, in this model, the influences of various parameters were explored,such as the mesh gap, the distribution of needle electrodes, the number of needle electrodes,and the radius of the circular channel. The numerical research results showed that the mesh gap, the distribution of needle electrodes, and the radius of the circular tube significantly affected the velocity of the ionic wind. When mesh gap is 12 mm,which indicates that there is an optimal mesh gap which can enhance the velocity of the ionic wind. What is more, changing the distribution of needle electrodes and increasing the number of needle electrodes can effectively improve the velocity of the ionic wind, the optimum distribution α of needle electrodes is 0.7–0.9, which greatly increase the velocity of the ionic wind. However, for multi-needle-to-mesh structure, the improvement of the radius of the circular channel is conducive to enhance the velocity and improve the velocity distribution.     

Lagrangian analysis of the formation and mass transport of compressible vortex rings generated by a shock tube

In order to understand the mass transport and the dynamic genesis associated with a compressible vortex formation,a dynamic analysis of compressible vortex rings (CVRs) generated by shock tubes by using the framework of Lagrangiancoherent structures (LCSs) and finite-time Lyapunov exponents field (FTLE) is performed. Numerical calculation is performed to simulate the evolution of CVRs generated by shock tubes with 70 mm, 100 mm, and 165 mm of the driver sectionat the circumstances of pressure ratio = 3. The formation of CVRs is studied according to FTLE fields. The mass transportduring the formation is obviously seen by the material manifold reveled by FTLE fields. A non-universal formation numberfor the three CVRs is obtained. Then the elliptic LCSs is implemented on three CVRs. Fluid particles separated by ellipticLCSs and ridges of FTLE are traced back to t = 0 to identify the fluid that eventually forms the CVRs. The elliptic LCSsencompass around 60% fluid material of the advected bulk but contain the majority of the circulation of the ring. The otherparts of the ring carrying almost zero circulation advect along with the ring. Combining the ridges of FTLE and the ellipticLCS, the whole CVR can be divided into three distinct dynamic parts: vortex part, entrainment part, and advected part. Inaddition, a criterion based on the vortex part formation is suggested to identify the formation number of CVRs.     

Polarization manipulation of bright-dark vector bisolitons

We simulate the polarization manipulation of bright-dark vector bisolitons at 1-μm wavelength regime.Through changing the pulse parameters,different kinds of pulse shapes and optical spectra are generated in output orthogonal polarization directions.When the input vector bisoliton is polarization-locked with 1064 nm central wavelength,“1+1”fundamental dark-dark and“2+1”pseudo-high-order bright-dark group-velocity-locked vector solitons can be achieved through changing the projection angle.When the input vector bisoliton is group-velocity-locked with 1063 nm and 1065 nm central wavelengths,“2+1”and“2+2”pseudo-high-order bright-dark group-velocity-locked vector solitons,bright-dark group-velocity-locked vector solitons with chirp-like temporal oscillations are generated.Our simulation results can provide beneficial conduct for polarization manipulation of vector multi-solitons,and have promising applications in quantum information register,optical communications,nanophotonics,and all-optical switching.     

Intercalation of germanium oxide beneath large-area and high-quality epitaxial graphene on Ir(111) substrate

Epitaxial growth on transition metal surfaces is an effective way to prepare large-area and high-quality graphene.However,the strong interaction between graphene and metal substrates suppresses the intrinsic excellent properties of graphene and the conductive metal substrates also hinder its applications in electronics.Here we demonstrate the decoupling of graphene from metal substrates by germanium oxide intercalation.Germanium is firstly intercalated into the interface between graphene and Ir(111) substrate.Then oxygen is subsequently intercalated,leading to the formation of a GeO_x layer,which is confirmed by x-ray photoelectron spectroscopy.Low-energy electron diffraction and scanning tunneling microscopy studies show intact carbon lattice of graphene after the GeO_x intercalation.Raman characterizations reveal that the intercalated layer effectively decouples graphene from the Ir substrate.The transport measurements demonstrate that the GeO_x layer can act as a tunneling barrier in the fabricated large-area high-quality vertical graphene/GeO_x/Ir heterostructure.     

描述甲烷在Pt(110)-(21)表面的化学吸附解离的密度泛函评估

本文探讨了几种梯度近似(GGA)密度泛函及元梯度近似(meta-GGA)密度泛函在描述甲烷在重构的Pt(110)-(2×1)上的解离化学吸附作用的适用性. 金属的体相和表面结构、甲烷的吸附能量和解离能垒等被用来评估泛函的可靠性. 另外,在从头算分子动力学计算中,采用范德瓦尔斯矫正的GGA函数(optPBE-vdW)和范德瓦尔斯矫正的meta-GGA函数(MS-PBEl-rVV10）计算粘附概率. 计算结果表明,使用这两种泛函能更好地与现有的实验结果吻合,从而为发展甲烷在Pt(110)-(2×1)表面解离的可靠机器学习势能面打下重要基础.     

基于自组装膜的光纤错位型氨气传感器

演示了一种基于单壁碳纳米管（SWCNTs）-聚合物自组装复合膜的光纤错位型氨气传感器。通过层层自组装技术在高Q谐振器上涂覆薄膜,薄膜上存在大量的游离羧基以及较大的比表面积,这提供了光与薄膜之间的强相互作用,以及对氨气的高吸附性和选择性。光谱随氨气浓度影响的有效折射率而变化。在(10～37) ×10⁻⁶的低浓度范围内,光谱变化与氨气浓度差之比即灵敏度为13.25 pm/10⁻⁶,检测极限为3.77 ×10⁻⁶并且具有良好的线性。这项工作研制为低浓度和高选择性氨气传感器提供了一种有效的方法。     

Common (π,π) Band Folding and Surface Reconstruction in Fe As-Based Superconductors

High resolution angle-resolved photoemission spectroscopy(ARPES) measurements are carried out on CaKFe_4 As_4,KCa_2 Fe_4 As_4 F_2 and(Ba_(0.6)K_(0.4))Fe_2 As_2 superconductors.Clear evidence of band folding between the Brillouin zone center and corners with a(π,π) wave vector has been found from the measured Fermi surface and band structures in all the three kinds of superconductors.A dominant ~(1/2)×~(1/2) surface reconstruction is observed on the cleaved surface of CaKFe_4As_4 by scanning tunneling microscopy(STM) measurements.We propose that the commonly observed ~(1/2)×~(1/2) reconstruction in the FeAs-based superconductors provides a general scenario to understand the origin of the(π,π) band folding.Our observations provide new insights in understanding the electronic structure and superconductivity mechanism in iron-based superconductors.     

一种高灵敏度的桥型声表面波应变传感器

为了提高声表面波传感器应变灵敏度,该文提出了一种桥型声表面波应变传感器.首先根据受压弯曲构件中应变分布特点设计了桥型声表面波应变传感器,并建立有限元模型,结合微扰法分析了桥型结构几何参数与声表面波应变传感器灵敏度的关系.根据分析结果确定桥型声表面波应变传感器几何结构参数,并与传统声表面波应变传感器的应变灵敏度进行了对比...     

High Tc superconductivity in layered hydrides XH15 (X = Ca,Sr, Y,La) under high pressures

The theoretical predictions and experimental synthesis of H₃S and LaH₁₀ superconductors with record high superconducting transition temperatures (T_c) have promoted the hydrogen-based superconducors to be a research hotspot in the field of solid-state physics. Here, we predict an unprecedented layered structure CaH₁₅, with high T_c of 189 K at 200 GPa using ab initio calculations. As concerns the novel structure, one layer is made of a hydrogen nonagon, the other layer consists of a Ca atom and six H₂ molecular units surrounding the Ca atom. This layered structure was also found in SrH₁₅, YH₁₅, and LaH₁₅ at high pressures, each materials exhibit high T_c especially YH₁₅ can reach above 200 K at 220 GPa. It represents the second class of layered superhydrides with high value of T_c after pentagraphene like HfH₁₀.