Highly accurate gas chromatographic analysis of reference gases for use in vehicle emission measurements

 A highly accurate gas chromatographic analytical method has been developed for the determination of the composition of gas mixtures. It was tested using a reference gas as an example consisting of 3.5% of CO, 14% of CO₂, 0.2% of propane and residual N₂ intended for the use in vehicle emission measurements. The method is based on comparison measurements with samples of a calibration gas, whose composition is iteratively adapted to that of the sample investigated using a gravimetric gas mixing method. For the gas chromatographic measurement, a molecular sieve column and a polymer column are used in parallel and in isothermal operation. All gas components can be determined by a single gas chromatographic measurement, and the relative uncertainty of measurement achievable is ?0.4%. Received: 6 March 1996/Revised: 30 May 1996/Accepted: 6 June 1996     

Effects of nonionic sugar surfactants on the phase transition of DPPC membranes

The influence of newly synthesized N-alkanoyl-N-methyllactitolamines (decanoyl [C₁₀MELA], lauoroyl [C₁₂MELA] and miristoyl [C₁₄MELA]) on the thermotropic phase transition of phosphatidylcholine bilayer was compared with common sugar-based surfactants N-dodecyl-β-d-glucopyranoside [C12G1] and decanoyl-N-methyl glucamide [MEGA-10]. The results indicate that C_nMELA are very active at the membrane surface and disturb the phospholipid bilayer structure less than commercially used MEGA-10 and C12G1.     

Flow injection analysis: Rayleigh light scattering technique for total protein determination

A novel flow injection analysis (FIA) method with Rayleigh light scattering (RLS) detection was developed for the determination of total protein concentrations. This method is based on the weak intensity of RLS of bromothymol blue (BB) (3',3"-dibromothymolsulfonephthalein) which can be enhanced by the addition of protein in weakly acidic solution. A common spectrofluorimeter was used as a detector. It was proved that the application of this method to quantify the total proteins in real samples by using bovine serum albumin was possible. The RLS signal was detected at lambda(ex)= lambda(em)=572 nm. The linear range was 7.0-70.0 microg mL(-1), the detection limit was 3.75 microg mL(-1), the reproducibility was 5.5% (n=7), and the sample throughput was 26 h(-1).     

Electric conductivity in a fibrous porous medium with thin but polarized double layers

The electric conduction in the fibrous medium constructed by a homogeneous array of parallel, identical, charged, circular cylinders having an arbitrary zeta potential filled with the solution of a symmetrically charged electrolyte is analytically examined. The thickness of the electric double layers surrounding the dielectric cylinders is assumed to be small relative to the radius of each cylinder and to the gap width between two neighboring cylinders, but the polarization of the mobile ions in the diffuse layers is allowed. The effect of interactions among individual cylinders is taken into explicit account by employing a unit cell model. The appropriate equations of conservation of electrochemical potential energies of ionic species are solved for each cell, in which a cylinder is envisaged to be surrounded by a coaxial cylindrical shell of the fluid solution. Analytical expressions for the effective electric conductivity are obtained in closed forms as functions of the porosity of the fiber matrix and other characteristics of the porous system. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. Under an otherwise identical condition, the electric conductivity in a porous medium composed of an array of parallel cylinders in the transverse direction is smaller than that of a suspension of spheres. The effect of interactions among the cylinders or spheres on the effective conductivity can be quite significant under appropriate conditions.     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

Biosensors based on enzyme field-effect transistors for determination of some substrates and inhibitors

This paper is a review of the authors' publications concerning the development of biosensors based on enzyme field-effect transistors (ENFETs) for direct substrates or inhibitors analysis. Such biosensors were designed by using immobilised enzymes and ion-selective field-effect transistors (ISFETs). Highly specific, sensitive, simple, fast and cheap determination of different substances renders them as promising tools in medicine, biotechnology, environmental control, agriculture and the food industry.The biosensors based on ENFETs and direct enzyme analysis for determination of concentrations of different substrates (glucose, urea, penicillin, formaldehyde, creatinine, etc.) have been developed and their laboratory prototypes were fabricated. Improvement of the analytical characteristics of such biosensors may be achieved by using a differential mode of measurement, working solutions with different buffer concentrations and specific agents, negatively or positively charged additional membranes, or genetically modified enzymes. These approaches allow one to decrease the effect of the buffer capacity influence on the sensor response in an aim to increase the sensitivity of the biosensors and to extend their dynamic ranges.Biosensors for the determination of concentrations of different toxic substances (organophosphorous pesticides, heavy metal ions, hypochlorite, glycoalkaloids, etc.) were designed on the basis of reversible and/or irreversible enzyme inhibition effect(s). The conception of an enzymatic multibiosensor for the determination of different toxic substances based on the enzyme inhibition effect is also described.We will discuss the respective advantages and disadvantages of biosensors based on the ENFETs developed and also demonstrate their practical application.     

Influence of Pretreatment Conditions on Methane Aromatization Performance of Mo／HZSM—5 and Mo—Cu／HZSM—5 Catalysts

Mo/HZSM-5 is a good catalyst for methane aromatization, and the reaction performance of Mo/HZSM-5 and Cu modified Mo/HZSM-5 catalysts under various pretreatment conditions has been studied. The results indicate that the catalyst presented a distinguished catalytic activity, benzene selectivity and a high stability when the bed temperature was raised in N2 atmosphere.     

Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

Ag+、Hf2+与Tl3+对Belousov-Zhabotinskii反应影响的初步研究

本文初步研究TAg＋、Hg’十与T13十对以Mh‘十为催化剂的B－Z反应的影响，观察这些Br’去除离子存在下的极投环行为，并对其机理进行初步研讨．按照FKN机理同，B－Z反应是受Br一控制的．1979年N。SZtiCZills将适量的Ag十加入B·Z反应系统，澳离子选择电极上振荡虽被抑制了，但拍电极上却出现频率更高的振荡问．由于Ag十与Bt一生成了AgBr沉淀，使系统的［Br则降至其临界值以下，因此，Noszticzius认为不可能是Br控制的，FKN机理不再适用．1981年K5rs。等人报导了能与Br一形成稳定配合物的Hg‘十与T户十对B－Z反应的影响［3］…