Synthesis and Photophysical Properties of Hetero‐Bischelated Complexes of Rhodium(III) Containing Phenyl‐Pyridin‐2‐Ylmethylene‐Amine

Three new hetero‐bischelated rhodium (III) complexes of cis‐[Rh(PA)(L)Cl₂]Cl (where PA = phenylpyridin‐2‐ylmethylene‐amine; L = 2,2′‐bipyridine, 2,2′‐dipyridylamine and 1,10‐phenanthroline) have been successfully prepared and characterized. Each complex shows high intensity bands in the UV region, and these are assigned to spin‐allowed π‐π* transitions. The medium‐intensity absorption band profile in the lower energy region can be explained by convolution of spin‐allowed CT and d‐d* transitions. The emission spectra at low temperature (77 K) of these complexes in EtOH/MeOH (4:1 v/v) are virtually identical. They all exhibit a broad, symmetric, and structureless red emission with a microsecond lifetime and hence are assigned as the d‐d* phosphorescence.     

Quality evaluation of fingerprints of herbal medicine with chromatographic data

In this study, local least squares (LLS) and principal component analysis (PCA) were applied to deal with the disturbances in a data set of chromatographic fingerprints after necessary data transformations. It has been demonstrated that PCA with standard normal variate (SNV) transformation of data led to meaningful classification of 33 different Erigeron breviscapus herbal samples. The result was also corroborated by variance squares discriminant method. The quality of herbal objects was further evaluated, and the causes of this fact have been explained from a chemical point of view. At the same time, it implied an idea for qualitative evaluation of the herbal objects with a common class pattern of chromatographic fingerprints.     

Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.     

盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱法定量研究

建立盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱定量分析方法。盐酸吡哆辛在0.1mol/L氢氧化钠溶液-0.1moL/L磷酸二氢钾溶液-水(体积比为1.2:8.8:990)的混合溶液中,于-0.140V(vs·Ag/AgCl)处出现一良好的二阶导数差示脉冲极谱峰,盐酸吡哆辛浓度在3.6×10~(-4)～9.6×10~(-4)mol/L范围内与其峰幅值呈显著的线性关系(P<0.01),线性相关系数r=0.9997,检出限为9.0nmol/L。     

Measurements of FRET in a glucose-sensitive affinity system with frequency-domain lifetime spectroscopy

We report measurements of fluorescence resonance energy transfer (FRET) for glucose sensing in an established concanavalin A–dextran affinity system using frequency‐domain lifetime spectroscopy. A dextran (MW 2000000) labeled with a small fluorescent donor molecule, Alexa Fluor 568, was used to competitively bind to a sugar‐binding protein, concanavalin A, labeled with acceptor molecule, Alexa Fluor 647, in the presence of glucose. The FRET‐quenching kinetics of the donor were analyzed from frequency‐domain measurements as a function of both glucose and acceptor‐protein concentrations using a Förster‐type decay kinetics model. The results show that the frequency‐domain measurements and donor decay kinetics can quantitatively indicate changes in the competitive binding of 0.09 μM dextran to labeled concanavalin A at a solution concentration of 10.67 μM in the presence of glucose at concentrations ranging from 0 to 224 mg/dL.     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.     

Ab initio structure determination of new compound Ba3(BO3)(PO4)

The crystal structure of new compound Ba₃BPO₇ was determined by ab initio method from high-resolution conventional X-ray powder diffraction data. The Rietveld refinement converged to R_p=5.92%, R_wp=8.87%, R_exp=5.00% with the following details: Hexagonal, space group P6₃mc, a=5.4898 (1) Å, c=14.7551(1) Å, Z=2. The basic unit of the structure is the [BaO₁₀]-[BO₃]-[PO₄] polar polyhedra-chain composed of Ba1-B-P-O cluster. These chains, running along c-axis, stack in a HCP mode to build the whole structure with triangular prism channels. The channels are parallel to c-axis too, in which Ba2 and Ba3 are located.     

Syntheses and characterizations of three-dimensional channel-like polymeric lanthanide complexes constructed by 1,2,4,5-benzenetetracarboxylic acid

The hydrothermal reaction of YbCl(3) small middle dot6H(2)O with 1,2,4,5-benzenetetracarboxylic dianhydride resulted in [[Yb((b)btec)(1/4)((d)btec)(3/6)(H(2)O)(2)](4).6H(2)O](n)() (1) (H(4)btec = 1,2,4,5-benzenetetracarboxylic acid), and the solvothermal reaction of Er(NO(3))(3) small middle dot6H(2)O or TbCl(3).6H(2)O with 1,2,4,5-benzenetetracarboxylic dianhydride in H(2)O/acetic acid gave rise to [[Er(2)((c)btec)(2/4)((e)btec)(2/4)((f)btec)(2/4)(H(2)O)(4)].4H(2)O](n)() (2) and [[Tb(H(2)btec)(2/4)((f)btec)(3/6)(H(2)O)].2H(2)O](n)() (3), respectively. Complex 1 crystallizes in monoclinic space group C2/m with a = 20.8119(5) A, b = 17.6174(1) A, c = 5.7252(2) A, beta = 92.324(1) degrees, and Z = 1. 1 possesses a three-dimensional framework consisting of eight-coordinate ytterbium centers and two kinds of channels along the c axis. Complex 2 crystallizes in triclinic space group P with a = 9.6739(5) A, b = 11.0039(5) A, c = 11.5523 A, alpha = 104.8330(10) degrees, beta = 91.0000(10) degrees, gamma = 114.2570(10) degrees, and Z = 2. 2 has a three-dimensional framework comprising both eight- and nine-coordinate erbium centers and channels along the a axis. Complex 3 crystallizes in monoclinic space group P2(1)/n with a = 10.7246(12) A, b = 7.1693(9) A, c = 17.158(2) A, beta = 97.109(2) degrees, and Z = 4. 3 shows a three-dimensional framework containing nine-coordinate terbium centers and channels along the b axis. Uncoordinated water molecules occupy the channels in the three complexes. TGA and XRPD were determined for the three complexes, and the results illustrate that the framework of 1 is retained upon removal of uncoordinated and coordinated water molecules.     

A hybrid nonaqueous electrochemical supercapacitor using nano-sized iron oxyhydroxide and activated carbon

A beta-iron oxyhydroxide (FeOOH) was synthesized via a hydrolyzing route and investigated as a lithium intercalation host. It delivers a capacity of about 170 mAh/g and exhibits good cycling performance when charged/discharged in the voltage range from 1.6 V to 3.3 V. For the first time we have confirmed that FeOOH is suitable for using it as a negative electrode for hybrid electrochemical supercapacitor assembled with an activated carbon positive electrode in 1.0 M LiPF₆ ethylene carbonate/dimethyl carbonate (EC/DMC, 1:2 in volume) solution. The cell reveals a slightly sloping voltage profile from 0 V to 2.8 V and gives an estimated specific energy of 45 Wh/kg based on the total weight of two electrode materials, approximately two times of carbon/carbon electrochemical double layer capacitors. The hybrid supercapacitor shows a good cycling performance, it remains approximately 96% of initial capacity after 800 cycles at a charge/discharge rate of 4 C. The capacitor also shows a desirable rate capability, even at 10 C discharge rate, it holds 80% of capacity compared with that at 1 C discharge rate.