塞曼效应仿真实验平台

塞曼效应实验是学生了解原子具有磁矩和空间取向量子化现象的重要实验,至今塞曼效应仍是研究能级结构的重要方法之一.为了能够让学生更加清楚地了解塞曼效应实验的基本原理和操作规程,针对教学中的重点和难点,运用flash软件制作出塞曼效应仿真实验.该程序可全程高度仿真实验过程,具有界面友好、易于操作、无需安装等优点.为实验教学提供了一种新的辅助方式.     

Nonclassical state via superposition of two coherent states (π/2 out of phase) and related entangled states

Nonclassical features of the superposition of two coherent states which are π/2 out of phase are discussed, such as sub-Poissonian photon statistics and quadrature squeezing, as well as negativity of the Wigner function. Special nonclassicality is found in the special state where the relative phase of superposition has relationship with the average photon number. The analysis of the amount of entanglement is also presented for the related two-mode entangled coherent states.     

Electrical Characterization of Metal-Insulator-Metal Capacitors with Atomic-Layer-Deposited HfO2 Dielectrics for Radio Frequency Integrated Circuit Application

Metal-insulator-metal （MIM） capacitors with atomic-layer-deposited HfO2 dielectric and TaN electrodes are investigated for rf integrated circuit applications. For 12nm HfO2, the fabricated capacitor exhibits a high capacitance density of 15.5fF/μm2 at 100kHz, a small leakage current density of 6.4 × 10^-9 A/cm^2 at 1.8V and 125℃, a breakdown electric field of 2.6 MV//cm as well as voltage coefficients of capacitance （VCCs） of 2110ppm/V^2 and -824 ppm/V at 100kHz. Further, it is deduced that the conduction mechanism in the high field range is dominated by the Poole-Frenkel emission, and the conduction mechanism in the low field range is possibly related to trap-assisted tunnelling. Finally, comparison of various HfO2 MIM capacitors is present, suggesting that the present MIM capacitor is a promising candidate for future rf integrated circuit application.     

A cell-based study on pedestrian acceleration and overtaking in a transfer station corridor

Pedestrian speed in a transfer station corridor is faster than usual and sometimes running can be found among some of them. In this paper, pedestrians are divided into two categories. The first one is aggressive, and the other is conservative. Aggressive pedestrians weaving their way through crowd in the corridor are the study object of this paper. During recent decades, much attention has been paid to the pedestrians’ behavior, such as overtaking (also deceleration) and collision avoidance, and that continues in this paper. After sufficiently analyzing the characteristics of pedestrian flow in transfer station corridor, a cell-based model is presented in this paper, including the acceleration (also deceleration) and overtaking analysis. Acceleration (also deceleration) in a corridor is fixed according to Newton’s Law and then speed calculated with a kinematic formula is discretized into cells based on the fuzzy logic. After the speed is updated, overtaking is analyzed based on updated speed and force explicitly, compared to rule-based models, which herein we call implicit ones. During the analysis of overtaking, a threshold value to determine the overtaking direction is introduced. Actually, model in this paper is a two-step one. The first step is to update speed, which is the cells the pedestrian can move in one time interval and the other is to analyze the overtaking. Finally, a comparison between the rule-based cellular automata, the model in this paper and data in HCM 2000 is made to demonstrate our model can be used to achieve reasonable simulation of acceleration (also deceleration) and overtaking among pedestrians.     

MOVPE生长GaN的表面反应机理

利用量子化学的 DFT 理论,对 MOVPE 生长 GaN 薄膜的表面初始反应机理进行研究。通过计算GaCH3和NH3在GaN(0001)-Ga面的4种吸附位的能量曲线发现,GaCH3在各吸附位的吸附能差值不大,因此容易在表面迁移;而NH3在各吸附位的吸附能差值较大,最稳定吸附位为Top位,迁移到其他位置需要克服较大能垒。在此基础上,提出了以NH3和 GaCH3为表面生长基元,在GaN(0001)-Ga面连续生长,最终形成环状核心的二维生长机理：在环状核心形成过程中,第1个GaN核生长需要3个NH3和1个GaCH3,可表示为Ga( NH2)3。第2个GaN核生长可利用已有的1个N作为配位原子,故只需2个NH3和1个GaCH3。2个GaN核可表示为( NH2)2 Ga-NH-Ga( NH2)2。第3个GaN核生长可利用已有的2个N作为配位原子,故只需要1个NH3和1个GaCH3。3个GaN核构成环状核心,可表示为Ga3( NH)3( NH2)3。后续的生长将重复第2个核和第3个核的生长过程,从而实现GaN薄膜的连续台阶生长。     

纳米通道内气体剪切流动的分子动力学模拟

采用分子动力学模拟方法研究了表面力场对纳米通道内气体剪切流动的影响规律.结果显示通道内的气体流动分为两个区域:受壁面力场影响的近壁区域和不受壁面力场影响的主流区域.近壁区域内,气体流动特性和气体动力学理论预测差别很大,密度和速度急剧增大并出现峰值,正应力变化剧烈且各向异性,剪切应力在距壁面一个分子直径处出现突变.主流区域的气体流动特性与气体动力学理论预测相符合,该区域内的密度、正应力与剪切应力均为恒定值,速度分布亦符合应力-应变的线性响应关系.不同通道高度及密度下,近壁区域的归一化密度、速度及应力分布一致,表明近壁区域的气体流动特性仅由壁面力场所决定.随着壁面对气体分子势能作用的增强,气体分子在近壁区域的密度和速度随之增大,直至形成吸附层,导致速度滑移消失.通过剪切应力与切向动量适应系数(TMAC)的关系,得到不同壁面势能作用下的TMAC值,结果表明壁面对气体分子的势能作用越强,气体分子越容易在壁面发生漫反射.     

Exotic entanglement scaling of Heisenberg antiferromagnet on honeycomb lattice

The scaling behaviors of entanglement entropy (EE) against dimension cut-off of density matrix renormalization group (DMRG) in an anisotropic Heisenberg model on honeycomb lattice are investigated. In the gapped dimer phase, the entanglement spectrum (ES) exhibits large gaps and the EE shows an unexpected linear scaling before convergence. In contrast in the gapless Néel phase, the ES decays in a much smoother way, and the EE scales logarithmically. Our calculations show that the linear scaling in the dimer phase originates from one dominant Schmidt number plus n (nearly) degenerate Schmidt numbers that are much smaller than the dominant one. The non-trivial entanglement-scaling properties of the dimer and Néel phases could potentially be used for their detections.     

超高强块体非晶合金的研究进展

研制具有极限力学性能的金属材料一直是材料研究人员的梦想.超高强块体非晶合金是一类具有极高断裂强度(4 GPa)、高热稳定性(玻璃化转变温度通常高于800 K)和高硬度(通常高于12 GPa)的新型先进金属材料,其代表合金材料Co-Ta-B的断裂强度可达6 GPa,为目前公开报道的块体金属材料的强度记录值.本文系统地综述了该类超高强度块体非晶合金的组分、热学性能、弹性模量及力学性能,阐述了该类材料的研发历程;以弹性模量为联系桥梁,阐明了该类超高强块体非晶合金材料各物理性能的关联性,并揭示了其高强度、高硬度的价键本质.相关内容对于材料工作者了解该类超高强度金属材料的性能和特点,并推进该类材料在航空航天先进制造、超持久部件、机械加工等领域的实际应用有着重要意义.     

Finite-time disturbance observer-based trajectory tracking control for quadrotor unmanned aerial vehicle with obstacle avoidance

This paper investigates the problem of trajectory tracking control for quadrotor unmanned aerial vehicle (UAV) in the presence of dynamic obstacles and external disturbance forces/torques. More specifically, two new sliding mode disturbance observers are firstly designed to estimate the external disturbances, in which the observation errors can converge to zero in finite time. Furthermore, utilizing the observation information, a new sliding mode surface-like variable-based position tracking control scheme and a novel nonsingular terminal sliding mode-based attitude synchronization control scheme are developed to drive the UAV tracking the reference trajectory with obstacle avoiding. Moreover, the tracking errors of the close-loop control system can converge to zero within finite time by the analyses of Lyapunov methodology. Finally, the numerical simulation results are presented to illustrate the effectiveness of the proposed control schemes.     

The Soft Point and Its Applications in Body Falling*

From the mesoscopic point of view, a definition of soft point is introduced by considering the attributes of geometric profile and mass distribution. After that, this concept is used to develop the soft matching technique to simulate the chaotic behaviors of the equations. Especially, a tennis model with deformation factor a(t) is proposed to derive a generalized Newton-Stokes equation v′(t) = λ(v T-a(t)v(t)). Furthermore, a concept of duality of deformation factor a(t) and velocity v(t) with re...