三维MXene多孔结构的构建与应用研究进展

MXene作为一种新型二维（2D）纳米材料以其独特的高导电性、高电化学表面活性等特性在多个领域引起了广泛关注。然而,MXene纳米片在自组装过程中出现的紧密堆叠现象导致比表面积急剧下降,降低了活性表面积,从而严重阻碍了它们在能源储存、电磁屏蔽、吸附等领域的潜在应用。构建三维多孔结构是解决MXene组装过程中自堆叠问题的一种有效途径,而且通过不同的组装方法可以实现对多孔宏观结构组成成分、孔径分布以及孔径大小的调控,使得MXene多孔材料在机械性能、电学性能以及光热转换性能等方面得到更好的调整,从而满足不同应用领域的需求。本综述以Ti₃C₂T_x MXene为主要研究材料总结了各种多孔MXene宏观结构的制备方法,讨论了其在电池/超级电容器、电磁屏蔽与吸收、海水淡化、光催化以及传感和环境修复等方面的应用,阐述了MXene多孔结构在各种应用中的贡献与意义,并针对MXene多孔结构的制备、结构调控和应用等方面的机遇和挑战作了论述。     

基于混合溶剂有机电解液的超低温孔洞石墨烯超级电容

适用于极低温环境的石墨烯超级电容具有广阔的应用前景。然而,由于片层间严重的堆叠团聚,目前石墨烯超级电容的低温储能性能并不理想。本文使用H₂O₂氧化刻蚀法制备了孔洞石墨烯(rHGO),将传统有机溶剂碳酸丙烯酯(PC)和低凝固点溶剂甲酸甲酯(MF)混合制备了混合溶剂有机电解液,组装获得了能够在-60 ℃极低温环境下稳定工作的超级电容。结果表明,该超级电容在-60 ℃下的比电容为106.2 F·g^-1,相对于常温电容(150.5 F·g^-1)的性能保持率高达70.6%,显著优于未做处理的石墨烯(52.3%)以及文献中的其他石墨烯材料。得益于孔洞化形貌中丰富的介孔和大孔所形成的离子传输通道和缩短的离子传输路径,孔洞石墨烯内的离子扩散阻抗远小于普通石墨烯,且受温度降低的影响更小。在-60 ℃的极低温条件下,该超级电容表现出26.9 Wh·kg^-1的最大能量密度和18.7 kW·kg^-1的最大功率密度,优于传统碳材料的低温超级电容性能。-60 ℃时在5 A·g^-1电流密度下循环充放电10000次后电容保持率达89.1%,具有良好的低温循环稳定性。     

Weak acid leaching of uranium ore from a high carbonate uranium deposit

Journal of Radioanalytical and Nuclear Chemistry - Mineralogical study showed that the Yuejin uranium ore is from a low grade, high carbonate and high pyrite sandstone type uranium deposit. Uranium...     

Photodissociation reaction of 1,2-diiodoethane in solution: a theoretical and X-ray diffraction study

Various molecular species are known to form during the photoreaction of C2H4I2 in the gas phase and in solution. We have studied all species involved in this reaction by ab initio and density functional theory (DFT) calculations: Geometries, energies, and vibrational frequencies of C2H4I2, bridged C2H4I*, anti C2H4I*, C4H4, I2, I3-, and the isomer C2H4I-I were calculated. The absorption peaks and oscillator strengths of selected species along the potential energy surface (PES) were calculated using time-dependent DFT and were compared with available experimental results. The calculated PES satisfactorily describes the observed reactions of the photoexcited C2H4I2 molecule. In the gas phase, there is only one reaction pathway: the first C-I bond ruptures followed by a secondary C-I breakage in the haloethyl radical C2H4I*. In solution, by contrast, another reaction channel, which is energetically more favored over the secondary dissociation, is switched on due to a solvation effect: the bridged C2H4I* can bind to the free iodine atom to form a C2H4I-I isomer without any energy barrier. The isomer can then break into C2H4 and I2. The rotational barriers in the gas phase and in solution were also calculated and compared. To provide experimental data on the structure of C2H4I2 in solution, the ground state structure of C2H4I2 in methanol was determined from static X-ray diffraction data using 88 keV (lambda = 0.14 A) X-rays. The structural parameters are compared with those from the theoretical results.     

Study on the interactions between anti-tumor metal complexes and mononucleotides using trans-[en2Os(η2-H2)(CF3SO3)](CF3SO3) as a 1H NMR probe in a competitive mode

The interaction of several anti-tumor metal complexes with dGMP have been investigated using trans-[en2Os(η2-H2)]2+ as a 1H NMR probe in a competitive mode. Me2SnCl2, Bu2SnCl2, Et2Sn(phen)Cl2 and Et2SnCl2 can bind to dGMP mainly via phosphate; Cp2TiCl2 binds to dGMP mainly via phosphate and N7. The binding constant for (CH3)2SnCl2 binding to phosphate of dGMP exceeds 2.71×104. The binding constant for Cp2TiCl2 to phosphate is even greater than that of Sn(IV). Cis-platin has high affinity for both N7 and phosphate, but mainly for N7. Binding of the probe to N7 of dGMP reduces the binding affinity for phosphate of the same dGMP molecule by a factor of 5 to 6. Much the same factor is expected to apply to other metals containing agents interacting with dGMP.     

Gamma irradiation of high density poly(ethylene)/ethylene‐vinyl acetate/clay nanocomposites: possible mechanism of the influence of clay on irradiated nanocomposites

A further study on mechanical properties and morphology evolution of high density poly (ethylene)/ethylene‐vinyl acetate/and organically‐modified montmorillonite (HDPE/EVA/OMT) nanocomposites exposed to gamma‐rays (0–200 kGy) has been achieved. The results showed that nanocomposites have superior irradiation‐resistant properties to HDPE/EVA blend in mechanical properties. A transmission electron microscope study verified that a face‐face ordered nanostructure had been induced by gamma‐rays. The aim of this paper is to provide a possible mechanism on how the OMT influences the general properties of irradiated nanocomposites, based on the results of thermal, flammability and mechanical behavior. Three facts are postulated to be responsible for the mechanism. The first is the segregation of nano‐dispersed clay layers not only reduces polymer oxidation but prevents crosslinking reactions. The second is the nanostructure evolution induced by gamma‐rays, which may impart nanocomposites improved elasticity. The last is due to the Hofmann degradation, whose degraded products have opposite roles, accelerating polymer oxidation or promoting crosslinking reactions. These facts interact as well as compete with others. The properties of the nanocomposites strongly depended on the prevalent effects developing with increasing irradiation doses. Copyright © 2005 John Wiley & Sons, Ltd.     

钒硫团簇V2S2+、V3S4+的结构和稳定性

用ab initio分子轨道方法(RHF,UHF)和密度泛函(DFT)方法研究了团簇V2S2+、V3S4+的各种可能的几何构型和电子结构,所得理论计算能较好地解释有关实验结果.     

MOCVD生长铁电氧化物薄膜MO源研究进展

高性能铁电氧化物薄膜是当今功能材料的研究热点之一.随着新型MO源的不断研究与开发,利用MOCVD技术制备高质量铁电薄膜材料得到了快速的发展.本文在分析金属醇盐和金属β-二酮化合物等MO源的结构与其物性依赖关系基础上,分类综述了近年来在用于MOCVD方法生长铁电氧化物薄膜的新型MO源研究和开发方面的发展动态与趋势,为MOCVD方法制备铁电薄膜材料MO源的选择提供有用的参考与借鉴.     

松毛虫性信息素微量成分鉴定方法的研究

采用气相色谱-质谱分析确认了顺-5-,反-7-十二碳二烯乙酸酯是思茅松毛虫性信息素腺体的主要成分（次要成分由于含量极微且受杂质干扰,未能获得全扫描质谱图）。利用高分辨率毛细管气相色谱分析了思茅松毛虫性信息素腺体提取物的酯基转移和乙酰化反应的衍生物,进一步确认了顺-5-,反-7-十二碳二烯醇是思茅松毛虫性信息素腺体中的微量成分。探讨了功能团相互转换微量化学反应法鉴定松毛虫性信息素腺体中微量成分功能团和立体构型的优点。强调了性信息素微量成分鉴定工作在昆虫化学通讯系统研究中的重要性。     

传质助剂对柴油生物脱硫过程的影响

以从胜利油田被高含硫原油污染的土壤中筛选到的根癌土壤杆菌UP-3为研究对象,考察了模拟油体系中传质助剂对该菌株生物脱硫效果的影响,同时研究了在传质助剂存在条件下油水比、反应时间和硫含量对UP-3生物脱硫性能的影响。结果表明,该生物脱硫菌在脱除含硫化合物的同时不消耗其它烃类物质;传质助剂吐温80能够提高UP-3对模拟油中的脱硫率;吐温80存在时,UP-3在3d内可将模拟油（含硫量200mg／L）中98．01％的硫脱除;UP-3对柴油最高的脱硫率仅达到31．81％,需要进一步提高其对有机硫化物的脱硫活性。