Combining Metabolic Alkyne Labeling and Click Chemistry for Secretome Analysis of Serum-Containing Conditioned Medium

Main observation and conclusion Bioorthogonal click chemistry has emerged as a powerful tool for the specific modification of proteins in complex mixtures.Metab...     

激光能量对激光诱导Cu等离子体特征辐射强度、电子温度的影响

利用Nd:YAG激光(波长1 064 nm,脉宽10 ns)烧蚀金属Cu靶获得等离子体 .改变激光脉冲能量,观测到Cu的原子谱线和离子谱线随激光脉冲能量有不同的变化关系, 但都在330 mJ/pulse时,谱线强度达到最大,随后在330 mJ～370 mJ/pulse间出现一小平台 ,能量继续增加,各谱线强度减小.同时,使用烧蚀Cu靶产生的五条原子谱线(465.11 nm,5 10.55 nm,515.32 nm,521.82 nm,529.25 nm)的相对强度,在局部热力学平衡近似下,利用B oltzmann图的最小二乘法拟合,测定了不同激光能量下Cu等离子体的电子温度.随激光能量的增加,电子温度近似单调地从1.02×104 K上升到1.46×104 K后,反而有所下降.     

甲醇在二氧化钛上的光化学性质与表面结构的相关性

通过双光子光电子的方法探测了TiO₂(011)-(2×1) 和TiO₂(110)-(1×1)表面的光催化氧化甲醇的性质. 在吸附了甲醇的二氧化钛(011)和(110)界面处探测到了一个费米能级以上2.5 eV的电子激发态,该电子激发态可作为测试二氧化钛界面还原性的探针使用. 利用此探针在甲醇/TiO₂(011)-(2×1)和甲醇/TiO₂(110)-(1×1)界面探测到了一个随光照时间的电子激发态信号变化,这一变化可以归于光催化生成的表面羟基对界面还原性的影响. 由此得出的光催化氧化甲醇的速率TiO₂(110)-(1×1)比TiO₂(011)-(2×1)快了大约11.4倍. 这可能由于表面原子结构排布的原因不同. 本工作不仅介绍了一个利用双光子光电子能谱探测到的甲醇/TiO₂界面电子结构的细节特征,还揭示了表面结构对二氧化钛光反应性质的重要影响.     

基于无基底焦平面阵列红外热像仪的理论模型分析

基于双材料微悬臂梁热变形原理的光学读出非制冷红外探测阵列经历了从有基底结构向无基底结构的发展过渡,无基底阵列的红外成像结果和有限元模型分析均表明无基底阵列不满足恒温基底条件.本文结合电学比拟的方法,提出了一种新的基于无基底焦平面阵列(focal plane Array,FPA)的热传递分析的理论模型.分析采用整体考虑的思路,避开了无基底FPA阵列各单元热传递互相影响所产生的复杂热分布分析,并考虑了框架对热量的吸收与传递.理论模型采用外边框与环境等温的边界条件,虽不及有限元方法对边界条件的处理灵活,但也已取 关键词： 光学读出 无基底 非制冷红外成像 焦平面阵列     

One-step synthesis ofα,β-unsaturated arylsulfones by a novel multicomponent reaction of aromatic aldehydes,chloroacetonitrile, benzenesulfinic acid sodium salt

A new and green method for the synthesis of α,β-unsaturated arylsulfones had been achieved through the condensation of aromatic aldehydes,chloroacetonitrile,benzenesulfinic acid sodium salt in the presence of l-butyl-3-methyl imidazolium hydroxide([bmim]OH) in EtOH under reflux.The ionic liquid was recovered and recycled for subsequent reactions.The advantages of this protocol were non-toxic,easy work-up and good yields.     

Synthesis of boronate-silica hybrid affinity monolith via a one-pot process for specific capture of glycoproteins at neutral conditions

In this study, a boronate-silica hybrid affinity monolith was prepared for specific capture of glycoproteins at neutral pH condition. The monolith was synthesized via a facile one-pot procedure in a stainless steel column by concurrently mixing hydrolyzed alkoxysilanes tetramethoxysilane and vinyltrimethoxysilane, organic monomer 3-acrylamidophenylboronic acid and initiator 2,2′-azobisisobutyronitrile together. The polycondensation of alkoxysilanes and copolymerization of organic monomer and vinyl-silica monolith were carried out successively by reacting at different temperatures. After optimizing the preparation conditions, the resulting hybrid affinity monolith was systematically characterized and exhibited excellent affinity to both cis-diol-containing small molecules and glycoproteins at neutral and physiological pH, including adenosine, horseradish peroxidase, transferrin and ovalbumin. The binding capacity of ovalbumin on monolith was measured to be 2.5 mg g^?1 at pH 7.0. Furthermore, the hybrid affinity monolith was applied to the separation of transferrin from bovine serum sample at a physiological condition. Good repeatability was obtained and the relative standard deviations of retention time were 1.15 and 4.77 % (n?=?5) for run-to-run and column-to-column, respectively.     

Synthesis of aromatic diamine-based benzoxazines and effect of their backbone structure on thermal and flammability properties of polymers

Three kinds of novel aromatic diamine-based benzoxazines containing naphthalene, propane-2,2-diyldibenzene and neopentyl groups in the backbone, respectively (designated as BAPNCP, BAPBACP and BAPNPGCP, respectively), were synthesized and characterized. In addition, the effects of backbone structures on curing behaviors of the monomers and thermal and flammability properties of the resulting polymers were systematically studied. The results indicated that BAPNPGCP displayed the highest enthalpy of the curing reaction associated with the ring-opening of benzoxazine, which was due to the effect of benzoxazine ring content per unit mass. Interestingly, the 5 wt% weight loss temperature and char residue after thermogravimetric test for poly(BAPNPGCP) were 8 °C and 7% higher than those of poly(BAPBACP). Meanwhile, the total heat release of poly(BAPNPGCP) was less than half of that for poly(BAPBACP), indicating the substantial effect of benzoxazine ring content on flammability and char formation. Furthermore, it was found that poly(BAPNCP) gave the best thermal stability and flame retardancy, which was due to the synergistic effect between naphthalene group and benzoxazine ring content. This study provides new insight into the curing behavior of benzoxazine and further understanding on the high performance of polybenzoxazine.     

Preparation of cellulose I nanowhiskers with a mildly acidic aqueous ionic liquid: reaction efficiency and whiskers attributes

Cellulose I nanowhiskers were prepared in relatively high yield (48 ± 2 %) by single-stage hydrolysis of microcrystalline cellulose with an aqueous solution of 1-butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO₄). This reaction occurred under mildly acidic reaction conditions with an [H⁺]/[AGU] ratio of 0.24 mol/mol, i.e., 2 orders of magnitude lower than with concentrated sulfuric acid. The nanowhiskers exhibited small width and width distribution and also smaller length than nanowhiskers obtained with concentrated acid. With a relatively low content of sulfur they also exhibited higher thermal stability than whiskers obtained with concentrated sulfuric acid. The lower solvating power of the aqueous ionic liquid compared to that of concentrated sulfuric acid likely contributes to the greater hydrolysis efficiency in the present system.