基于AMESim的制动钳动态所需液量检测仿真研究

制动钳所需液量检测是制动钳性能检测中十分重要的一部分,目前关于制动钳动态所需液量检测研究缺乏理论和仿真依据,无法结合实际检测实现制动钳故障诊断,针对这一问题,在研究主缸位移差值法动态所需液量检测系统数学模型的基础上搭建AMEsim仿真模型,对主缸活塞速度和钳体结构因素进行仿真分析,并通过实验验证模型的正确性。结果表明：主缸活塞速度对动态所需液量检测影响较小;回位弹簧刚度、制动间隙和摩擦块、橡胶密封圈硬度对动态所需液量曲线有不同程度的影响,可以根据曲线特征实现制动钳故障诊断。     

Dynamics of laser-induced shock wave by optical probe in air

A new simple optical system based on optical beam deflection combining the holophote corner cube was developed in order to study the dynamics of laser-induced shock waves in air. In this method, we adopt a He-Ne laser beam as the detection beam. The He-Ne laser beam, reflected by corner cube, intersects the propagating shock wave at two successive positions. The measurement of the shock wave velocity benefits from the double peak signals induced by the same acting laser pulse, which is calculated from the time interval between the corresponding oscilloscope signals and the distance of the two He-Ne laser beams. By virtue of this setup, we are also able to determine the pressure of the generated shock waves. It is shown that this method is simple with a fairly good precision and is much easier than the conventional methods used for this task.     

Temperature-insensitive fiber Bragg grating dynamic pressure sensing system

Temperature-insensitive dynamic pressure measurement using a single fiber Bragg grating (FBG) based on reflection spectrum bandwidth modulation and optical power detection is proposed. A specifically designed double-hole cantilever beam is used to provide a pressure-induced axial strain gradient along the sensing FBG and is also used to modulate the reflection bandwidth of the grating. The bandwidth modulation is immune to spatially uniform temperature effects, and the pressure can be unambiguously determined by measuring the reflected optical power, avoiding the complex wavelength interrogation system. The system acquisition time is up to 85 Hz for dynamic pressure measurement, and the thermal fluctuation is kept less than 1.2% full-scale for a temperature range of -10 degrees C to 80 degrees C.     

Design of a circular Dammann grating

A novel circular Dammann grating is proposed to generate uniform-intensity impulse rings corresponding to different diffraction orders in the far field. The intensities of the rings are determined by the coefficients of the circular sine series decomposition of the grating function. The definition of diffraction efficiency and uniformity for this novel device are described. Numerical solutions of binary phase circular Dammann gratings are presented. A binary phase three-order circular Dammann grating of pi phase depth is fabricated by an e-beam direct writing technique and is experimentally demonstrated.     

基于递推最小二乘的红外焦平面非均匀校正算法

根据递推最小二乘和图像配准原理,提出了基于递推最小二乘的红外焦平面非均匀校正算法(简称ILS算法),有效降低算法的时间和空间复杂度,使噪音图像的校正处理能够实时完成.ILS算法具有噪音参量估计准确度高、收敛速度快和计算复杂度低等优点.给出了算法的推导并用仿真数据对算法的有效性进行验证.     

Control of an ultrasonic transducer to realize low speed driven

This paper deals with the control of a transducer to realize low speed. A new PWM control is proposed to fit the transducer. By this control method, the transducer is directly excited by pulses whose width can be modulated. The noise induced by conventional PWM control is eliminated and the motor works more steadily and more quietly. Instead of the general method of decreasing vibrating amplitude of ultrasonic motor to realize low speed, in this paper, two fast contrary elliptical vibrations of the transducer's two Langevin vibrators are excited to restrain skip-slip influence on ultrasonic motor's low speed performance and the driven is realized by the difference of the two vibrators' vibrating amplitudes. Experiments had been carried out by driving an aerostatic guide and fuzzy control is applied. The controlled speed reached 0.1 mm/s.     

Synthesis of spherical LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries

Spherical LiNi_1/3Co_1/3Mn_1/3O₂ was successfully prepared by controlled crystallization. The preparation started with the spherical coprecipitate of Ni_1/3Co_1/3Mn_1/3CO₃ from NiSO₄, CoSO₄, MnSO₄, NH₄HCO₃, and NH₃·H₂O, followed by pyrolysis of Ni_1/3Co_1/3Mn_1/3CO₃ at 600°C for 3 h. The X-ray diffraction analysis showed that the homogeneous cubic (Ni_1/3Co_1/3Mn_1/3)₃O₄ was obtained after the pyrolysis. Spherical LiNi_1/3Co_1/3Mn_1/3O₂ was obtained by sintering of the mixture of as-obtained (Ni_1/3Co_1/3Mn_1/3)₃O₄ and LiOH·H₂O at 900°C for 6 h in air. As-prepared spherical LiNi_1/3Co_1/3Mn_1/3O₂ presented initial discharge capacity of 162.9 mA h g⁻¹ and capacity retention of 98% at 50th cycle.