A cell-based study on pedestrian acceleration and overtaking in a transfer station corridor

Pedestrian speed in a transfer station corridor is faster than usual and sometimes running can be found among some of them. In this paper, pedestrians are divided into two categories. The first one is aggressive, and the other is conservative. Aggressive pedestrians weaving their way through crowd in the corridor are the study object of this paper. During recent decades, much attention has been paid to the pedestrians’ behavior, such as overtaking (also deceleration) and collision avoidance, and that continues in this paper. After sufficiently analyzing the characteristics of pedestrian flow in transfer station corridor, a cell-based model is presented in this paper, including the acceleration (also deceleration) and overtaking analysis. Acceleration (also deceleration) in a corridor is fixed according to Newton’s Law and then speed calculated with a kinematic formula is discretized into cells based on the fuzzy logic. After the speed is updated, overtaking is analyzed based on updated speed and force explicitly, compared to rule-based models, which herein we call implicit ones. During the analysis of overtaking, a threshold value to determine the overtaking direction is introduced. Actually, model in this paper is a two-step one. The first step is to update speed, which is the cells the pedestrian can move in one time interval and the other is to analyze the overtaking. Finally, a comparison between the rule-based cellular automata, the model in this paper and data in HCM 2000 is made to demonstrate our model can be used to achieve reasonable simulation of acceleration (also deceleration) and overtaking among pedestrians.     

大口径光学元件中频波前的检测

大口径光学元件中频波前的准确评价已成为高功率激光系统中关注的焦点,元件中频波前均方根值是重要评价指标之一。根据波前中频检测频段及波前检测设备频响特性,将波前的中频区域分为两个检测频段,分别采用干涉仪和光学轮廓仪实现了中频波前均方根值的检测。采用大口径干涉仪可实现全口径波前中频区域低频段波前的检测,通过比对大口径干涉仪和采用小口径干涉仪结合分块融合平均方法的检测结果,提出采用分块融合平均方法也可检测相应频段全口径波前均方根。采用光学轮廓仪通过离散采样的方法检测大口径元件中频区域高频段波前均方根,针对不同离散采样方式的实验结果表明：33的采样方式能满足对410 mm410 mm口径元件中频区域高频段波前均方根的检测。     

Uncertain partial differential equation with application to heat conduction

This paper first presents a tool of uncertain partial differential equation, which is a type of partial differential equations driven by Liu processes. As an application of uncertain partial differential equation, uncertain heat equation whose noise of heat source is described by Liu process is investigated. Moreover, the analytic solution of uncertain heat equation is derived and the inverse uncertainty distribution of solution is explored. This paper also presents a paradox of stochastic heat equation.     

Ratiometric and water-soluble fluorescent zinc sensor of carboxamidoquinoline with an alkoxyethylamino chain as receptor

A novel "naked-eye" and ratiometric fluorescent zinc sensor (AQZ) of carboxamidoquinoline with an alkoxyethylamino chain as receptor was designed and synthesized. AQZ shows good water solubility and high selectivity for sensing; about an 8-fold increase in fluorescence quantum yield and a 75 nm red-shift of fluorescence emission upon binding Zn2+ in buffer aqueous solution are observed. Moreover, AQZ can enter yeast cells and signal the presence of Zn2+.     

用透射电镜和火焰原子吸收法分析大气总悬浮颗粒物

以大气总悬浮颗粒物为主要研究对象,用透射电镜观察其形貌,污染特征明显;用火焰原子吸收法测定其水溶性常规元素K、Na、Ca和Mg。K、Na、Ca和Mg的检出限分别为0.105、0.124、0.259和0.237mg/kg,线性相关系数不低于0.9979,加标回收率为90.0%～95.0%,测定结果的相对标准偏差为0.6%～2.1%(n=6)。     

氧化钙和氟化钾负载高岭土固体碱催化制备新型生物柴油

以高岭土为载体,利用浸渍法制备了氧化钙和氟化钾负载高岭土固体碱(GCK);利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(FT-IR)和哈密特指示剂法等技术手段对催化剂进行表征;考察了KF负载量和反应条件对月桂酸甲酯(ML)与乙二醇单甲醚(EGME)酯交换反应制备新型生物柴油产率的影响。 结果表明,GCK碱强度(H_)在7.2~18.4之间,KCaF₃为主要活性组分,当氟化钾负载量为25%、EGME与ML摩尔比3.0、催化剂用量相对于ML的质量分数为4.5 %、120 ℃下反应2 h,新型生物柴油的收率高达97.1%。 最后对催化剂的重复利用性能进行了考察。     

Ca2+- and ba2+-ligand coordinated unilamellar, multilamellar, and oligovesicular vesicles

Ca(2+)- and Ba(2+)-coordinated vesicle phases were prepared in mixed aqueous solutions of tetradecyldimethylamine oxide (C(14)DMAO) and calcium oleate (Ca(OA)(2)) or barium oleate (Ba(OA)(2)). At the right mixing ratios, metal-ligand coordination between Ca(OA)(2) or Ba(OA)(2) and C(14)DMAO results in the formation of molecular bilayers due to the reduction in area per head group. Ca(2+) and Ba(2+) tightly associate to the head groups of surfactants and in this system the bilayer membranes are not shielded by excess salts. The structures of the birefringent samples of the Ca(OA)(2)/C(14)DMAO/H(2)O and Ba(OA)(2)/C(14)DMAO/H(2)O systems were determined by freeze-fracture transmission electron microscopy (FF-TEM), small-angle X-ray scattering (SAXS), and rheological measurements to consist of unilamellar, multilamellar, and oligovesicular vesicles. The coordination between C(14)DMAO and Ba(OA)(2) or Ca(OA)(2) plays an important role in the formation of the vesicles, which was easily confirmed by studying the phase behavior of the KOA/C(14)DMAO/H(2)O system in which only the L(1) phase forms, due to the absence of coordination between KOA and C(14)DMAO. A mechanism is proposed that accounts for the formation of these new metal-ligand coordinated vesicles.     

Plasmonic enhancements of photocatalytic activity of Pt/n-Si/Ag photodiodes using Au/Ag core/shell nanorods

We report the plasmonic enhancement of the photocatalytic properties of Pt/n-Si/Ag photodiode photocatalysts using Au/Ag core/shell nanorods. We show that Au/Ag core/shell nanorods can be synthesized with tunable plasmon resonance frequencies and then conjugated onto Pt/n-Si/Ag photodiodes using well-defined chemistry. Photocatalytic studies showed that the conjugation with Au/Ag core/shell nanorods can significantly enhance the photocatalytic activity by more than a factor of 3. Spectral dependence studies further revealed that the photocatalytic enhancement is strongly correlated with the plasmonic absorption spectra of the Au/Ag core/shell nanorods, unambiguously demonstrating the plasmonic enhancement effect.     

Migratory Shift in Oxidative Cyclodehydrogenation Reaction of Tetraphenylethylenes Containing Electron‐Rich THDTAP Moiety

Four tetraphenylethylenes ( 2 a – d ) containing an electron‐rich 2,3,4,6‐tetrahydro‐1,6‐dithia‐3a‐azaphenalene (THDTAP) moiety have been synthesized. The 2 a – d show aggregation‐induced emission (AIE) with yellowish green photoluminescence (PL) in THF‐H₂O (v/v, 1:9) solution and in the solid state. Compounds 2 a – d undergo 1,2‐migratory shift in oxidative cyclodehydrogenation reactions to afford the unexpected products 3 a – d which display green PL in CH₂Cl₂ solution and are non‐emissive in the solid state. The PL intensities of 3 a – d are clearly enhanced in the presence of meta‐chloroperoxybenzoic acid (mCPBA) owing to the oxidation of the S‐atoms on the THDTAP moiety. In contrast, the PL of 2 a – d in THF‐H₂O (v/v, 1:9) solution is quenched by adding mCPBA, ascribable to the oxidation of the C=C bond on the ethylene moiety. It is found that the absorption of 3 a – d is distinctly red‐shifted from the UV/Vis region to the NIR region upon acidification, arising from the protonation of the N‐atom on the THDTAP moiety. Furthermore, 3 a – d display nonlinear optical response (NLO) and optical limiting (OL) behaviour which is superior to that of the well‐known OL material C₆₀.     

Storage Stability of LiFePO4/C in Humid‐hot Air

Storage stabilities of LiFePO₄/C composite at different conditions are investigated in terms of structural and electrochemical evolutions. The results from different aging tests indicate that moisture and temperature are the key factors that have the most profound effects on the structure homogeneity which in turn influences the electrochemical performance of LiFePO₄/C. Although the storage in a humid‐hot environment, such as saturated humidity air at 50°C, does not greatly influence the discharging capacity of LiFePO₄/C, it does reduce the initial charging capacity, thus the amount of reversible Li⁺ ions in a practical LiFePO₄/graphite cell decreases. This impact is explained by the lithium extraction during the storage, forming olivine FePO₄ and associated Li₃PO₄. Elevated storage temperature also favors the delithiation process. The degree of delithiation increases from about 6% at 50°C to 18% at 80°C. It is also found that re‐calcination at 650°C effectively resolves the problem of the structural heterogeneity of the stored LiFePO₄/C. Therefore both the initial charging capacity and coulombic efficiency of the stored sample in the first cycle revert to the original value of the fresh one.