Surface modification of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane in supercritical carbon dioxide for enhancing interfacial strength

PBO fiber is one of the most promising reinforcements in resin matrix composite because of its excellent mechanical properties. However, the inert and smooth surfaces make it the poor interface adhesion with resin matrix, which seriously limits the application in composites. In this article, we report a method to modify the surface of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane（BisAPAF）in supercritical CO₂ to enhance interfacial properties. Chemical structures, surface elemental composition and functional groups, and surface morphology were characterized by FT-IR spectrometer, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), respectively. The mechanical properties of the samples were tested by a tensile tester. Static contact angle and microdebonding tests were used to characterize the wetting ability and interfacial shear strength (IFSS) of the fiber and epoxy resin. The results showed that the BisAPAF could be solved in scCO₂ and introduced more groups, –NH₂, –OH, and –CF₃ on the fiber surface, resulting in the mechanical properties and the wettability of PBO fiber slightly improved. Moreover, the fiber surface roughness was also increased obviously. The IFSS between the modified PBO fiber and epoxy resin increased from 8.18 MPa to 31.4 MPa when the treating pressure was 14 MPa. In general, the method to modify PBO fibers surface using BisAPAF in scCO₂ can effectively improve their interfacial properties.     

Tomonaga-Luttinger liquid features in ballistic single-walled carbon nanotubes: conductance and shot noise

We study the electrical transport properties of well-contacted ballistic single-walled carbon nanotubes in a three-terminal configuration at low temperatures. We observe signatures of strong electron-electron interactions: the conductance exhibits bias-voltage-dependent amplitudes of quantum interference oscillation, and both the current noise and Fano factor manifest bias-voltage-dependent power-law scalings. We analyze our data within the Tomonaga-Luttinger liquid model using the nonequilibrium Keldysh formalism and find qualitative and quantitative agreement between experiment and theory.     

Bacteria and cancer cell pearl chain under dielectrophoresis

In this work, we aim to observe and study the physics of bacteria and cancer cells pearl chain formation under dielectrophoresis (DEP). Experimentally, we visualized the formation of Bacillus subtilis bacterial pearl chain and human breast cancer cell (MCF-7) chain under positive and negative dielectrophoretic force, respectively. Through a simple simulation with creeping flow, AC/DC electric fields, and particle tracing modules in COMSOL, we examined the mechanism by which bacteria self-organize into a pearl chain across the gap between two electrodes via DEP. Our simulation results reveal that the region of greatest positive DEP force shifts from the electrode edge to the leading edge of the pearl chain, thus guiding the trajectories of free-flowing particles toward the leading edge via positive DEP. Our findings additionally highlight the mechanism why the free-flowing particles are more likely to join the existing pearl chain rather than starting a new pearl chain. This phenomenon is primarily due to the increase in magnitude of electric field gradient, and hence DEP force exerted, with the shortening gap between the pearl chain leading edge and the adjacent electrode. The findings shed light on the observed behavior of preferential pearl chain formation across electrode gaps.     

Medical radioisotope 89Zr production with RFT-30 cyclotron

Journal of Radioanalytical and Nuclear Chemistry - 89Zr is an emerging radionuclide with promising application in nuclear medicine for the non-invasive diagnosis of various cancers with PET...     

Metabolome Analysis of Selective Inactivation of Human Melanoma and Normal Cells by Cold Atmospheric Plasma

Plasma Chemistry and Plasma Processing - Cold atmospheric plasma (CAP) is a novel technology which is widely used in the biomedical field and has developed quickly over the past few years,...     

Sarcaglarols A—D,Lindenane−Monoterpene Heterodimers from Sarcandra glabra Based on Molecular Networks

Sarcaglarols A—D ( 1 — 4 ), two pairs of lindenane?monoterpene heterodimers fused by a 1,2‐dioxane moiety, were discovered and isolated from the leaves of Sarcandra glabra guided by MS/MS molecular networking‐based strategy. Their planar structures, absolute configurations of basic skeleton and flexible polyhydric side chain were established by analysis of HRESIMS, NMR spectroscopic data, ECD spectrum, and the X‐ray diffraction study of isopropylidene derivatives. An intermolecular [2+2+2] cycloaddition may play a key role in the biosynthesis pathway of the 1,2‐dioxane moiety fused lindenane?monoterpene heterodimer skeleton, which can be recognized as the biogenetic precursors of our previous reported lindenane?normonoterpene conjugates. In addition, compounds 1 , 3 and 4 exhibited moderate inhibitory effects of lipid accumulation in free fatty acid‐exposed L02 cells.     

Study on LiFe<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sm<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>PO<Subscript>4</Subscript>/C used as cathode materials for lithium-ion batteries with low Sm component

LiFe_1???x Sm _x PO₄/C cathode materials were synthesized though a facile hydrothermal method. Compared with high-temperature solid-phase sintering, the method can allow for the fabrication of low Sm content (2 %), a scarce and expensive rare earth element, while the presence of an optimized carbon coating with large amount of sp²-type carbon sharply increases the material’s electrochemical performance. The high-rate dischargeability at 5 C, as well as the exchange current density, can be increased by 21 and 86 %, respectively, which were attributed to the fine size and the large cell parameter a/c as much. It should be pointed out that the a/c value will be increased for the LiFePO₄ Sm-doped papered by both of the two methods, while the mechanism is different: The value c is increased for the front and the value a is decreased for the latter, respectively.     

奥氏体不锈钢深冷低温冲击试验方法研究

以液氦作为冷源,结合G-M低温制冷机,实现-196~-269℃深冷温度环境,探索深冷低温冲击试验方法。结果表明,试样从低温环境中取出后置于大气环境中,温度出现快速回升。对于不同试验低温,可采用不同方法进行试验。试验温度T=4.2K时,可采用制冷机预冷+液氦持续喷淋的方法进行降温。试验温度10≤T77K时,可采用玻璃容器填充气凝胶粉体对试样进行绝热保温处理;或根据试验温度以及回温测试结果,以一定的过冷温度补偿值保证试验温度。过冷温度补偿方法可满足常规冲击试验的要求,但需要相对较大的过冷温度补偿值;玻璃容器填充粉体包裹试样,可减缓试样温度回升,但对材料冲击吸收能量有一定影响,可用多试样冲击试验并进行修正以反映材料冲击韧性水平。