低功率泵浦Ti：Al2O3自锁模激光器

本文报道了低功率泵浦的Ｔｉ：Ａｌ２Ｏ３激光器实现了稳定的自锁模运转，锁模脉冲宽度为１８０ｆｓ。分析了激光器的结构及工作特性。     

Syntheses and Structures of Sil abridged Hafnocene Dichlorides

The present paper covers three silabridged hafnocene dichlorides(1, 2 and 3) prepared by sequential reactions of α, ω-dichloropermethyl polysilane with cyclopentadienyl sodium, n-butyl lithium and hafnium tetrachloride. Their structures were characterized by elemental analyses, UV, 1H(13C) NMR and MS. Furthermore the crystal and molecular structures of 1 and 2 were determined by X-ray diffraction method. The crystal of 1 is monoclinic, space group C2/c with a=1. 3401(4), b=0. 9977(3), c = 1. 0922(4) nm; β=94. 07(1)° V=3. 6342 nm3, Z = 2, Dc = 2.155 g·cm-3. The final deviation factor R = 0. 064. The crystal of 2 is monoclinic, space group P21/c with a=0.0847(1), b=1.5181(1), c=2.9824(2) nm; β= 94. 07(1)°? V=3.634 nm3; Dc= l. 805 g·cm-3. The final deviation factor R = 0. 033. The relationship between the silabridged structure and spectral properties is also discussed.     

布尔“复合函数”的Walsh循环谱和自相关函数

本文利用布尔随机变量联合分布的分解式给出了布尔“复合函数”和某布尔函数符合率的分解算式,由此求得了布尔“复合函数”的 Walsh循环谱和自相关函数的计算公式,公式清楚地表明了“复合”所得布尔函数的 Walsh循环谱与起“复合”作用的函数和被“复合”的各函数所有线性组合的 Walsh循环谱之间的关系、“复合”所得布尔函数的自相关函数与起“复合”作用的函数谱和被“复合”的各函数的谱及相关函数之间的关系,这两个公式在布尔函数的密码学性质研究中会有广泛的应用.     

Melt rheology of polylactide/montmorillonite nanocomposites

In this article, the linear and nonlinear shear rheological behaviors of polylactide (PLA)/clay (organophilic‐montmorillonite) nanocomposites (PLACNs) were investigated by an Advanced Rheology Expanded System rheometer. The nanocomposites were prepared by master batch method using a twin‐screw extruder with poly(ε‐caprolactone) (PCL) as a compatibilizer. The presence of org‐MMT leads to obvious pseudo‐solid‐like behaviors of nanocomposite melts. The behaviors caused by the formation of a “percolating network” derived from the reciprocity among the strong related sheet particles. Therefore, the storage moduli, loss moduli, and dynamic viscosities of PLACNs show a monotonic increase with MMT content. Nonterminal behaviors exists in PLACNs nanocomposites. Besides the PLACNs melts show a greater shear thinning tendency than pure PLA melt because of the preferential orientation of the MMT layers. Therefore, PLACNs have higher moduli but better processibility compared with pure PLA. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3189–3196, 2007     

自伴算子代数上的某些*-自同态的σ-弱混合性

设A是希尔伯特空间H上的自伴算子代数,α是A上的*-自同态.如果存在单位向量e∈H,使得对任意α∈A和单位向量h∈H,有lim_(n→∞)〈α~n(a)h,h〉=〈αe,e〉成立,那么称α是A上的σ-弱混合的*-自同态.本文研究了这一有趣性质,并得到了一个*-自同态是σ-弱混合的充分条件.     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

Synthesis of MgAl2O4 Spinel Nanometer Powder via Biology Polysaccharide Assisted Sol-Gel Process

A novel and cost-effective sol-gel process for preparation of MgAl₂O₄ spinel nanometer powders has been developed in this study. A solution of magnesium and aluminum nitrates in stoichiometric proportion was successfully embraced in the biology polysaccharide gel network, formed by the synergistic interaction between xanthan gum (XG) and locust bean gum (LBG) utilizing their broad-spectrum stability of salt tolerance and character of transformation from sol to gel on the condition of proper temperature and relative proportion of polymeric components. Dry gel could be obtained by vacuum dehydration of aqueous gel at low temperatures. Monolithic MgAl₂O₄ spinel nanometer powders were produced by calcining the dry gel above 800°C, with average crystallite size of 20 nanometers.     

有机化合物电子光谱中的助色基及其作用机理探讨(Ⅰ)

本文就电子光谱中助色基的作用进行了讨论 ,认为不能一概地认为助色基能使与之相连的生色基最大吸收波长统统发生红移 ,而应具体问题具体分析 :对于n→π 来说 ,一方面助色基的p轨道和生色基的最低π 反键空轨道相互作用 ,使π 反键轨道能量上升 ,另一方面助色基的p轨道和生色基的n轨道正交 ,n轨道能量基本保持不变 ,因此n→π 跃迁能增加 ,吸收波长发生蓝移。对于π→π 跃迁来说 ,助色基的p轨道和生色基的最高π成键轨道相互作用生成的新的最高π成键轨道 ,能量虽然有所升高 ,但升高的程度与π 反键轨道升高的程度相比 ,在一些化合物中π轨道升高程度较大 ,因而π→π 跃迁能减小 ,吸收波长发生红移 ;在另一些化合物中π轨道升高程度较小 ,因而π→π 跃迁能增加 ,吸收波长发生蓝移。     

Lanthanide Complexes for Oligomerization of Phenyl Isocyanate

IntroductionThestudyonthereactivitiesoflanthanidecomplexesto wardisocyanateshasattractedmuchattention .Ithasbeenre portedthatlanthanidealkoxides,1anddivalentdiaza pentadi enyllanthanidecomplexes2 canbeusedasthesinglecompo nentinitiatorsforisocyanatespolymerization .Recentlyourre searchgrouphasalsofoundthatlanthanoceneamide ,3diva lentaryloxideofsamarium4 ,5anddivalentsamarocene6 areallactivefortheoligomerizationofphenylisocyanate,andtheactivespeciesforthesethreesystemswereallsuccessfullyisolat…     

A retractable structure based on Bricard linkages and rotating rings of tetrahedra

Retractable structures which alter their geometries according to practical requirements are widely used in roof structures of stadiums for their versatility. A retractable structure based on threefold-symmetric Bricard linkages and rotating rings of tetrahedra is proposed and developed in this paper. By replacing each link of a threefold-symmetric Bricard linkage with a tetrahedron, a retractable structure is obtained which can repeatedly open and close by rotating the tetrahedra. The geometric relationship between the retractable structure and the threefold-symmetric Bricard linkage is derived and ranges of main geometric parameters are determined to ensure a continuous and smooth movement in the deployment of the structure. Then the relative displacement of the support and the open rate of the structure, two main parameters concerned in practical applications, are investigated. Preferred ranges of main geometric parameters are proposed and a physical model is manufactured to verify them. A discussion on some possible improvements and modifications of the structure is also presented.