Fluorescence Probe Studies of Ionic Micelles in Concentrated Salt Solutions

We have investigated the effect of salt concentration and temperature on the average aggregation number and micro-polarity of the interior of micelles of sodium dodecyl sulfate (SDS). sodium tetradecyl sulfate (STDS) and lithium dodecyl sulfate (LiDS). The transient fluorescence decay of micelle-solubilized pyrene has been measured and analyzed. An exponent weighted average aggregation number <n>_e was obtained by this technique. For SDS and STDS in NaCl solution, <n>_e increases as the temperature is lowered or salt concentration is increased <n>_e increased from ～ 50 to ～ 250 over [NaCl] = 0 to 0.8 M. Due to the strong counterion binding of lithium in the micellar solution, the LiDS micelle is much, smaller and does not increase appreciabily even at [LiCl] =0.8 M. From the fluorescence spectrum fine structure of pyrene and the fluorescence decay of the monomer and excimer, we can understand the local polarity and the water penetration to the interior of the micelle upon addition of salts and with changing temperature. The interior of the micelle becomes more nonpolar as the salt concentration is increased and the temperature is lowered. A complete kinetic analysis of the time–dependence of the fluorescence is given. The kinetic analysis is in agreement with the results reached by fluorescence spectral analysis.     

Characterizations of iron-rich clay modified electrodes and their applications in optical recognition

Optical recognition was studied with modified electrodes based on iron-rich clays. According to energy-dispersive X-ray spectroscopy (EDX), several clay minerals including montmorillonite K10 (mont. K10) contain a lot of iron. Cyclic voltammetry suggested that electrochemically active iron species exist in most iron-rich clays and are likely to reside at different sites. The associated electrochemical activity is strongly pH-dependent and photosensitive. Under UV irradiation (λ ≤ 420 nm), these iron species were activated, and a pronounced photocurrent resulted. When these electrodes were flow-injected with 2-pyridylcarboxylic acids (λ_ab,max = 260 nm), the originally monotonic photocurrent could be modulated into a more recognizable a.c. pattern and the 260 nm optical signal became distinguishable. The photoresponse was highly reproducible, and the response time (t₉₀) was less than 10s.     

高效离子排斥色谱法测定饮料中的糖精钠

提出了一种用高效离子排斥色谱法测定饮料中糖精钠的新方法。以ＩｏｎＰａｃ ＩＣＥ－ＡＳ ６柱为分离柱，０．１０ ｍｍｏｌ／ＬＨ２ＳＯ４＋甲醇（９＋１）为淋洗液，２０２ｎｍ波长下紫外检测。在１－１００ｍｇ／Ｌ范围内，糖精钠的含量与峰面积呈 良好线性关系。检出限为０．６０ｎｇ，灵敏度优于以往采用离子交换色谱－电导检测法的结果。在实验条件下，饮料 中常见有机酸以及其它人工合成甜味剂等均不产生干扰。方法用于饮料中糖精钠的测定，加标回收率为９８％～ １０５％。此外还比较了电导检测、紫外检测和经化学抑制系统后紫外检测等三种检测方式对测定灵敏度的影响。     

Electrodeposition behavior of Mg with Zn from acidic sulfate solutions

Electrodeposition of Mg with Zn in acidic sulfate solutions with polyethylene glycol and octadecyl dimethyl benzyl ammonium chloride as additives was investigated by scanning electron microscopy, X-ray diffraction, and potentiodynamic polarization techniques. The results show that these two compounds act in a synergetic way to suppress Zn deposition markedly and facilitate Mg reduction. Zn–0.46%Mg coatings are produced under high cathodic current densities, which have lower corrosion potentials than Zn coatings and hydrogen evolution in neutral chloride solutions. Magnesium hydroxide may cause current oscillations at high cathodic polarizations in plating solutions without zinc salts due to its formation and peel-off. An “induced co-deposition” mechanism is proposed for Zn–Mg alloy electrodeposition.     

H_2TPP与AgNO_3在乙醇中的光反应

用紫外可见吸收光谱研究了 5,10 ,15,2 0 -四苯基卟啉 (H2 TPP)的乙醇溶液与AgNO3的乙醇溶液混合后 ,在光照条件下的化学反应。谱图显示H2 TPP发生络合反应 ,生成其二价银络合物Ag(Ⅱ )TPP。银胶能加快该反应的速度。     

Dipole Field Guided Orientated Attachment of Nanocrystals to Twin‐Brush ZnO Mesocrystals

Mesocrystals of ZnO were synthesized hydrothermally by using gum arabic as a structure‐directing agent. Their hierarchical structure has a unique twin‐brush form consisting of vertically aligned nanorods in a single‐crystal‐like porous form. The formation mechanism of the twin‐brush ZnO was investigated by quenching a series of samples at different times and examining them by TEM, SEM, and XRD. The alignment of ZnO crystal units can be modulated by adding simple salts such as KCl to change the units from nanorods to nanoplates. This can be explained by screening the dipolar force of the polar crystal. Local cathodoluminescence of twin‐brush ZnO was used to follow the local structure changes.     

Superheating Limit of Boiling n-Hexane Spinodal Decomposition Versus Nucleation Process

Two predicative theories for superheating limits of a boiling liquid are considered in this work. In the nucleation picture, classical homogeneous nucleation theory is used to calculate superheating temperature at various pressures. In spinodal decomposition picture, stability limits are taken as the superheating temperature. A perturbed-hard chain equation of state was developed and used for the purpose of calculating mechanical stability limit. Calculations are done for the case of normal hexane at different pressures and compared with experimental results. Classical nucleation theory gives good prediction at negative and smaller pressures. While near critical pressure, spinodal picture seems to be more accurate.     

Surface modification of polyolefin separators for lithium ion batteries to reduce thermal shrinkage without thickness increase

Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is important for the battery energy density. In this study, we grafted organic/inorganic hybrid crosslinked networks on the separators, simply by grafting polymerization and condensation reaction. The considerable silicon-oxygen crosslinked heat-resistance networks are responsible for the reduced thermal shrinkage. The strong chemical bonds between networks and separators promise enough mechanical support even at high temperature. The shrinkage at 150 C for 30 min in the mechanical direction was 38.6% and 4.6% for the pristine and present graft-modified separators, respectively. Meanwhile, the grafting organic-inorganic hybrid crosslink networks mainly occupied part of void in the internal pores of the separators, so the thicknesses of the graft-modified separators were similar with the pristine one. The half cells prepared with the modified separators exhibited almost identical electrochemical properties to those with the commercial separators, thus proving that, in order to enhance the thermal stability of lithium ion battery, this kind of grafting-modified separators may be a better alternative to conventional silica nanoparticle layers-coated polyolefin separators.