混合模式硅胶基质毛细管电色谱整体柱的制备及其电色谱性能研究

采用温和条件下的溶胶-凝胶技术，成功制备了阴离子交换-反相混合模式硅胶基质毛细管电色谱整体柱。通过调整反应液中不同前体的比例，优化了整体柱的制备条件。通过扫瞄电镜，对柱床进行了表征和分析。实验发现，所制备的整体柱电渗流的方向和大小可随流动相pH值的改变而改变，在酸性和中性条件下，具有从阴极流向阳极的电渗流；当流动相pH值升至约7．5时，电渗流方向发生了反转（由阳极流向阴极）。在优化的实验条件下，用所制备的整体柱对所考察的酸性（中性）化合物实现了快速分离，并获得了高达160，000N／m的柱效。     

A Novel Fluorescent Aminoacid Designed for Fluorometric Detection of Cu （Ⅱ）

A fluorescent aminoacid was designed for selective and sensitive detection of Cu(II) in aqueous solution. The designing of this Cu(II) fluorescent chemosensing molecule, N ± (1‐naphthyl). aminoacetic acid (NAA), was based on the binding of Cu(II) to aminoacetic acid and the novel charge transfer photophysics of 1‐aminonaphthalenes. The fluorescence of NAA was found quenched by Cu (II) and several other metal ions of similar electronic structure such as Co(II), Ni(II) and Zn(II). The quenching was shown to occur via electron transfer within the metal‐NAA complex, which required an optimal combination of high binding affinity and favorable redox properties of the components in the metal‐NAA complex and hence afforded selective fluorometric detection of Cu(II). The calibration graph obeyed Stern‐Volmer theory and was shown for Cu(II) over the range of 0–2.75 ± 10–⁴ mol/L. The quenching constant of Cu(II) was measured as 8.0 ± 10³ mol/L that was two orders of magnitude higher than those of Co(II), Ni(II) and Zn(II). The 3SD limit of detection for Cu(II) was 8.00 ± 10^?6 mol/L with a coefficient of variation of 1.65%. Linear range for quantitative detection of Cu(II) was 2.67 ± 10^?5‐2.75 ± 10^?4 mol/L. The method was applied to synthetic sample measurements which gave recoveries of 105%‐112%.     

Mesoporous amorphous MnO<Subscript>2</Subscript> as electrode material for supercapacitor

A kind of novel mesoporous, electrochemical active material, amorphous MnO₂ has been synthesized by an improved reduction reaction and using supramolecular as template. The synthesized sample was characterized physically by thermogravimetric analysis, X-ray diffraction, transmission electron microscope (TEM), and Brunauer–Emmett–Teller (BET) surface area measurement, respectively. Electrochemical characterization was performed using cyclic voltammetry and chronopotentiometry in 2 mol/l KOH aqueous solution electrolyte. The results of BET and TEM analysis indicated that supramolecular template plays an important role in the process of big specific surface area mesoporous material forming. After sintering at 200 °C, the sample still remained an amorphous structure, and its specific capacitance reached 298.7 F/g and presented a very stable capacitance after 500 cycles. In addition, the electrochemical process, such as ion transfer and electrical condition, was also investigated with electrochemical impedance spectroscopy.     

The preparation and fluorescence properties of europium nanoparticles

A new structured metallic nanomaterial of europium nanoparticle was prepared using tannic acid as the reductive agent,and nanoeuropium protein conjugates were synthesized by the method of lipoic acid modification on the surface of nanoparticle,which opens a new field of application of lanthanides in nanotechniques.Their properties were also characterized by UV-vis absorption spectroscopy,transmission electron microscopy (TEM),and fluorescence spectroscopy.The europium nanoparticle and its protein conjugates solution were stable and water-soluble.The fluorescence intensity of the composite europium nanoparticles was significantly increased in the presence of trace protein,and was linear proportional to the concentration of proteins under optimum conditions.According to this,a fluorimetric method for the determination of protein was developed in this paper.     

Preparation of nanometer FeCuP alloy and its application in decomposition of PH3

A new ternary Fe-based alloy catalyst FeCuP applied to decompose PH_3 was prepared with low-cost material by chemical reduction deposition method.The properties of it were characterized by XRD,ICP and SEM.Its catalytic activity on the decomposition of PH_3 and the decomposition conditions were studied.FeCuP alloy exhibits high thermal stabilities and high catalytic activity.Using it as catalyst,the decomposition temperature of phosphine decreases from over 800℃to 400-500℃.The decomposition rate of phosphine achieved 100%.     

三辛基氧化膦(TOPO)萃取铟的研究

本文研究了三辛基氧化膦(TOPO)自盐酸溶液中萃取铟的性能,其萃取率是随酸度的增加而增加。与P_(350)和TBP相比较,萃取能力大小顺序为:TOPO>P_(350)>TBP经斜率法和化学分析法研究确定,TOPO白盐酸溶液中萃取铟的反应为:In_((a))~(3+)+H_((a))~++4Cl_((a))~-+2TOPO_((o))F(?)HInCl_4·2TOPO_((o))IR和NMR研究证明:铟是以H[InCl_4]形式被萃入TOPO有机相中的。     

16-脱氢孕烯醇酮醋酸酯的环境友好合成法

Instead of environmentally toxic chromium oxidant, singlet oxygen generated photcchemically was used as environmentally friendly and benign oxidizing agent to accomplish the transformation of pseudodiosgenin diacetate to diosone efficiently in a low toxic and less expensive solvent acetone. Accordingly 16-dehydropregnenolone acetate(16-DPA), an important intermediate for preparation of steroidal drugs, was prepared in good yield (75%) when photoreaction was run in acetone/acetic anhydride/pyridine system. The mild reaction condition as well as simple and environmentally friendly process made the method commercially viable and important for production of 16-DPA in industrial scale.     

A cytotoxic compound from the leaves of Juglans mandshurica

From Juglans mandshurica leaves, a new quinone compound was isolated through bioassay-guided fractionation. The structure elucidation of the compound was established based on spectroscopic studies, notably of the 2D NMR spectra. The compound exhibited moderate cytotoxic activities against Hela, MCF-7, BGC823 and 3T3-Llcell lines with IC50 ranges from 7.5 to 26.8 μmol/L.     

Three New Serratane Triterpenoids from Phlegmariurus squarrosus

Three new serratane triterpenoids, (3α,14α,15α,21α)‐3,14,15,21,29‐pentahydroxyserratan‐24‐oic acid ( 1 ), (3α,21β)‐serrat‐14‐ene‐3,21,24,30‐tetraol ( 2 ), and (3α,21α)‐serrat‐14‐ene‐3,21,24,29‐tetraol ( 3 ), were isolated from Phlegmariurus squarrosus, together with eight known compounds. Their chemical structures were elucidated on the basis of in‐depth spectroscopic analyses.     

Synthesis and Crystal Structure of Two One—dimensional Chain Copper Complexes [Cu（TTA）2（4,4‘’—azpy）] and [Cu（TTA）2（3,3‘’—azpy）

Two copper complexes [Cu(TTA)₂(4,4′‐azpy)] (1) and [Cu‐(TTA)₂(3,3′‐azpy)] (2) (HTTA = 1,1,1‐trifluoro‐3‐(2‐thenoyl)‐acetone, 4,4′‐azpy = 4,4′‐azobispyridine, 3,3′‐azpy = 3,3′‐azobispyridine) were synthesized and characterized. The crystal structures were determined by X‐ray diffraction analysis. The crystal 1 belongs to triclinic with space group P1 , a = 0.8515(2) nm, b = 0.9259(2) nm, c = 0.9468(2) nm, a = 66.126(9)°, β = 79.667(9)°, γ = 90.13(1)°, Z = 1, V = 0.6692(2) nm³, D_c = 3.425 g/cm³, γ = 2.113 mm^?1, F(000) = 694, R₁ = 0.0594, wR₂ = 0.1499. The crystal 2 belongs to monoclinic with space group P2₁/c, a = 1.0661(2) nm, b = 1.4296(3) ran, c = 1.0041(3) nm, β = 114.50(3)°, V = 1.3926(5) nm³, Z = 2, D_c = 1.646 g/ cm³, μ = 1.015 mm^?1, F(000) = 694, R₁, = 0.0535, wR₂ = 0.1113. In the crystals of complexes 1 and 2, the copper atoms have distorted octahedral symmetry. The two compounds possess very similar one‐dimensional linear chains linked through the rodlike 4,4′‐azpy ligands or 3,3′‐azpy ligands.