Investigation of laminar plasma remelting/cladding processing

Investigation of remelting and cladding processing with laminar plasma jets on several metals has been conducted looking for possible development of a new surface modification technique. The remelting tests illustrated that the new method could evidently improve the material microstructure and properties of cast iron. The cladding was done with Al₂O₃ ceramic powder on stainless steel. The energy dispersive spectra (EDS) analysis was used to determine the distribution of the major cladding element in the plasma-processed layers, for which the microstructure observations and hardness measurements were also performed.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

低温等离子体对塑料表面处理——低温等离子体对高密度聚乙烯表面处理的ESR研究

本文研究了不同处理条件(处理功率、处理时间和处理压力)下等离子体气体(Ar、N₂、O₂和空气等)对高密度聚乙烯表面处理产生的自由基的ESR谱。我们观察到等离子体处理产生的自由基是相当稳定的,它的ESR信号强度随处理功率和处理时间增加而增加。但处理压力对它影响不大。我们证明了紫外线对高密度聚乙烯表面产生自由基作用随处理条件而变化。并初步解释了谱的超精细相互作用。     

Periodic solutions for a Lotka–Volterra mutualism system with several delays

In the present paper, a Lotka–Volterra type mutualism system with several delays is studied. Some new and interesting sufficient conditions are obtained for the global existence of positive periodic solutions of the mutualism system. Our method is based on Mawhin’s coincidence degree and novel estimation techniques for the a priori bounds of unknown solutions. Our results are different from the existing ones such as those in of Yang et al. [F. Yang, D. Jiang, A. Ying, Existence of positive solution of multidelays facultative mutualism system, J. Eng. Math. 3 (2002) 64–68] and Chen et al. [F. Chen, J. Shi, X. Chen, Periodicity in a Lotka–Volterra facultative mutualism system with several delays, J. Eng. Math. 21 (3) (2004) 403–409].     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.     

Transmission of a Gaussian beam after incidenting nonnormally on a Fabry–Perot etalon: a nonresonant case

Under the nonresonant case where the carrier frequency of a Gaussian beam deviates from the resonant frequency of a Fabry–Perot etalon, the transmission of a Gaussian beam after incidenting nonnormally on a Fabry–Perot etalon has been investigated. The results show that under the nonresonant case, variations of the peak intensity, the position of the peak intensity and the spot size of the transmitted beam with the input angle behave differently and even with a reversed tendency compared with those obtained under the resonant case.     

Optimized Pump Power Ratio on 2nd Order Pumping Discrete Raman Amplifier

By optimizing pump power ratio between 1st order backward pump and 2nd order forward pump on discrete Raman amplifier, we demonstrated over 2dB noise figure improvement without excessive non-linearity degradation.     

The Synthesis of Glycoglycerolipids

A convenient synthetic route was developed for the synthesis of the novel glycolipids: 1,2-di-O-acyl-3-O-(2‘-acylamide-2‘-denxy-ct-D-glucopyranosyl)-sn-glycerols. 10 new compounds of glycolipids with different acyl groups were obtained.     

Simple Entanglement Measure for Multipartite Pure States

A simple entanglement measure for multipartite pure states is formulated based on the partial entropy of a series of reduced density matrices. Use of the proposed new measure to distinguish disentangled, partially entangled, and maximally entangled multipartite pure states is illustrated.     

Optical characterization of bromo-alkoxyl-substituted copper phthalocyanine derivative thin films

A series of thin films of copper phthalocyanine derivatives with bromine and alkoxyl substituents [CuPc(OC₈H₁₇)₄Br_m, m=0,1,2,4] were prepared on single-crystal silicon substrates by spin coating. The ellipsometric spectra of the films have been studied on a rotating analyzer–polarizer type of scanning ellipsometer. The optical, dielectric constants and absorption coefficients of the films in 500–800 nm wavelength region were obtained. The results show that the complex refractive index, dielectric constants and absorption coefficient of these thin films are influenced regularly by bromine substituent on conjugated macrocycle. It was found that there are approximately linear relationships between the resonance absorption wavelengths of the films and the average number of bromine atoms substituted on the phthalocyanine ring.