Fluorinated nanoporous SiO2 films with ultra-low dielectric constant

Fluorinated nanoporous silica (denoted as SiO₂:F) thin films with low dielectric constant were prepared by a sol-gel method and spin coating technique. The leakage current densities of the SiO₂:F thin films were 10⁻⁸ and 3 × 10⁻⁶ A/cm² respectively for the as-deposited films and for those subjected to annealing at a temperature of 450 °C. These currents are more than one order of magnitude lower than those of the common SiO₂ films. Photoluminescent results showed strong blue-light emission and a small blue shift in the SiO₂:F films that were related to the increment of the porosity. The dielectric properties were also characterized and the k value of the annealed SiO₂:F film was found to be about 1.67. The hole size in the films is small and the size distribution is uniform for the annealed SiO₂:F samples due to the effects of fluorination. The underlying mechanism for fluorination is discussed in this paper.     

密集阵高功率微波空间功率合成

对基于矩形阵列的高功率微波二维密集阵阵列合成进行了研究。仿真分析了均匀矩形栅格阵列的远场方向图,结果表明采用密集阵可以实现高效的、具有确定主波束的空间功率合成。并分析了阵元间距及阵元初相位对阵列空间功率合成的影响,结果表明:阵元间距越小,栅瓣越少,主波束宽度越宽,具有确定主波束的临界距离越小;当目标高度超过阵临界距离时,阵元初相位相差越小合成效率越高,阵列初相位分布范围超过/2时,阵列得不到确定的主波束,进行阵列设计时应充分考虑阵元间距及初相位对阵列合成的影响。     

Average mutual information of the random block-message ensembles for many-letters

By making use of the theoretical framework presented by Bostroem(K.J.Bostroem,LANL quant-ph/0009052),we generalize the standard quantum information theory of block messages with fixed block length to the variable one.We show that the states belonging to a sufficiently large hilbert space are the highly distinguishable states.We also consider the collection states (product states of more than one qubit state) and seek a “pretty good measurement” (PGM) with measurement vectors to improve the mutual information.The average mutual information over random block-message ensembles with variable block length n is discussed in detail.     

Simultaneous Determination of Sn and S in Methyltin Mercaptide by Microwave-Assisted Acid Digestion and ICP-OESSCIEI北大核心CSCD

Methyltin mercaptide is widely used as one of the best heat stabilizer in the polyvinylchloride (PVC) thermal processing due to its excellent stability, good transparency, high compatibility and weather resistance. The content of sulfur and tin significantly affects its quality and performance, so it is of great significance to develop an analytical method for the simultaneous determination of sulfur and tin. Inductively coupled plasma atomic emission spectrometry (ICP-OES) has been a powerful analytical tool for a myriad of complex samples owing to its advantages of the low detection limits, rapid and precise determinations over wide dynamic ranges, freedom from chemical inter-element interferences, the high sample throughput and above all, simultaneous multi-elements analysis. Microwave technique as a well-developed method for sample preparation can dramatically reduce the digestion time and the loss of volatile elements compared with the traditional open digestion. Hereby, a microwave-assisted acid digestion (MW-AAD) procedure followed by inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis was developed for the simultaneous determination of Sn and S in methyltin mercaptide. This method has the advantages of simplicity, rapidness, good accuracy, green and less use of samples. Parameters affecting the MW-AAD such as the digestion solution and digestion time were optimized by using a chemical analyzed reference sample (DX-181) to attain tin and sulfur quantitative recoveries. HNO3-HCl-HClO4(v/v/v=9 : 3 : 1) and 10 min were the optimum digestion solution and digestion time, respectively. Under optimum conditions, the standard addition method and the standard calibration curve method were both been used to detect Sn and S in DX-181. There was no significant difference between two methods and the relative deviations to the chemical analysis values were both less than 2%. Additionally, the accuracy of the MW-AAD method was examined by analyzing three methyltin mercaptide samples (DX-181, DX-990, DX-960). The results were satisfactory with the relative deviations (<3%) and the recoveries of standard addition (99%-102%).     

The electron transport characters in a nanostructure with the periodic magnetic-electric barriers

This paper detailedly studies the transmission probability, the spin polarization and the conductance of the ballistic electron in a nanostructure with the periodic magnetic-electric barriers. These observable quantities are found to be strongly dependent not only on the magnetic configuration, the incident electron energy and the incident wave vector, but also on the number of the periodic magnetic-electric barriers. The transmission coefficient and the spin polarization show a periodic pattern with the increase of the separation between two adjacent magnetic fields, and the resonance splitting increases as the number of periods increases. Surprisingly, it is found that a polarization can be achieved by spin-dependent resonant tunnelling in this structure, although the average magnetic field of the structure is zero.     

The effect of Co ion implantation on Ge1−xMnx films

Ge_1−xMn_x (x = 0, 0.013, 0.0226, 0.0339, 0.0565, 0.0678, 0.0904, 0.113) films prepared by magnetron sputtering at 773 K had a Ge cubic structure except for x = 0.1130. Co ion implantation into these films can effectively prevent the formation of a second phase. Both single-doped and co-doped samples were ferromagnetic at room temperature. The d-d exchange interaction between the interstitial Mn (MnT) and the substituted Mn (Mn_Ge) resulted in ferromagnetism in the sputtered films. Since Co ion implantation destroyed the Mn_T-Mn_Ge-Mn_T complex, the saturated magnetization decreased. Hall measurements revealed that the Co ion implanted films were n-type semiconductors, and the anomalous Hall Effect (AHE) suggested the ferromagnetism was carrier-mediated in the implanted films.     

让世界跳跃的人--马克思*普朗克

回顾了普朗克在物理学上的贡献和对爱因斯坦的帮助，挖掘了他的物理思想，得到对他公正的认识．     

基于软件无线电的无源超高频RFID标签性能测试

讨论了无源超高频射频识别(UHF RFID)系统的信号传输过程及性能测试方法,以软件定义无线电方式实现了符合ISO/IEC18000-6C标准的无源标签的部分性能测试,研究了部分通信参数动态变化时标签应答功率的变化,并对不同标签的灵敏度进行了测试.所有实验在常规条件下完成,测试研究表明在基带编码采用较小的Tari值、PW为50％以及较高的调制系数时,阅读器能够接收到标签反射回来的最大功率,系统的识别距离最远. 关键词： 射频识别 无源电子标签 标签灵敏度 性能测试