Well‐Defined High Molecular Weight Polystyrene with High Rates and High Livingness Synthesized via Two‐Stage RAFT Emulsion Polymerization

A highly living polymer with over 100 kg mol⁻¹ molecular weight is very difficult to achieve by controlled radical polymerization since the unavoidable side reactions of irreversible radical termination and radical chain transfer to monomer reaction become significant. It is reported that over 500 kg mol⁻¹ polystyrene with high livingness and low dispersity could be synthesized by a facile two‐stage reversible addition–fragmentation transfer emulsion polymerization. The monomer conversion reaches 90% within 10 h. High livingness of the product is ascribed to the extremely low initiator concentration and the chain transfer constant for monomer unexpectedly much lower than the well‐accepted values in the conventional radical polymerization. The two‐stage monomer feeding policy much decreases the dispersity of the product.

     

The Analysis of Phenolic Compounds in Walnut Husk and Pellicle by UPLC-Q-Orbitrap HRMS and HPLC

Husk and pellicle as the agri-food waste in the walnut-product industry are in soaring demand because of their rich polyphenol content. This study investigated the differential compounds related to walnut polyphenol between husk and pellicle during fruit development stage. By using ultra-high performance liquid chromatography-quadrupole-orbitrap (UHPLC-Q-Orbitrap), a total of 110 bioactive components, including hydrolysable tannins, flavonoids, phenolic acids and quinones, were tentatively identified, 33 of which were different between husk and pellicle. The trend of dynamic content of 16 polyphenols was clarified during walnut development stage by high-performance liquid chromatography (HPLC). This is the first time to comprehensive identification of phenolic compounds in walnut husk and pellicle, and our results indicated that the pellicle is a rich resource of polyphenols. The dynamic trend of some polyphenols was consistent with total phenols. The comprehensive characterization of walnut polyphenol and quantification of main phenolic compounds will be beneficial for understanding the potential application value of walnut and for exploiting its metabolism pathway.     

Rapid determination of radon progeny concentration based on artificial neural networks

Journal of Radioanalytical and Nuclear Chemistry - The rapid measurement of radon progeny concentration is of great significance for improving the efficiency of radon exposure dose evaluation in a...     

Purification and Characterization of a Chymosin from Rhizopus microsporus var. rhizopodiformis

Purification and characterization of a chymosin from Rhizopus microsporus var. rhizopodiformis were investigated in the present study. A newly isolated R. microsporus var. rhizopodiformis F518 produced a high level of milk-clotting activity (1,001 SU/mL). A chymosin from the fungus was purified 3.66-fold with a recovery yield of 33.2 %. The enzyme appeared as a single protein band on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) with a molecular mass of 37.0 kDa. It was optimally active at 60 °C and was stable up to 40 °C. The purified enzyme was an acid protease with an optimum pH of 5.2 and retained 80 % of residual activity within pH 2.0–8.0. The inhibition of 96 and 100 % by pepstatin A at 0.01 and 0.02 mM, respectively, revealed that the enzyme is an aspartic protease. Thus, high milk-clotting activity of the chymosin with good stability will strengthen the potential use of the chymosin as a substitute for calf rennet in cheese manufacturing.     

纳米结构钛酸盐电极快速测定水体COD

分析了纳米结构钛酸盐电极快速测定COD的基本原理及COD标准物质定值方法。通过对纳米结构钛酸盐表征分析,钠型钛酸盐电极具有较高的灵敏度,外加0.7 V工作电位,测定COD溶液标准物质的线性相关系数大于0.995,误差在±8%以内;与国标方法比较,测量同一水样的误差在±15%以内。纳米结构钛酸盐电极可用于测量水体COD。     

Enantioselective Construction of Axially Chiral Amino Sulfide Vinyl Arenes by Chiral Sulfide-Catalyzed Electrophilic Carbothiolation of Alkynes

The enantioselective construction of axially chiral compounds by electrophilic carbothiolation of alkynes is disclosed for the first time. This enantioselective transformation is enabled by the use of a Ts-protected bifunctional sulfide catalyst and Ms-protected ortho-alkynylaryl amines (Ts=tosyl; Ms=mesyl). Both electrophilic arylthiolating and electrophilic trifluoromethylthiolating reagents are suitable for this reaction. The obtained products of axially chiral vinyl–aryl amino sulfides can be easily converted into biaryl amino sulfides, biaryl amino sulfoxides, biaryl amines, vinyl–aryl amines, and other valuable difunctionalized compounds.     

Preparation of styrene–divinyl benzene copolymer-supported platinum complexes and their catalytic properties in hydrosilylation

A new type of catalyst for the hydrosilylation of unsaturated monomers with dichloromethylsilane (DCMS) was prepared, which consisted of thiolmethylene-substituted styrene–divinyl benzene copolymer and platinum. When using DCMS as a hydrosilylation agent, these catalysts showed a high activity in the hydrosilylation of vinyl and acetylene monomers as styrene, alkyl vinyl silanes, acetylene, phenyl acetylene, butyl acrylate. The activities of catalysts were not significantly reduced even after 20 reuse cycles.     

Effects of guanidinium cations on structural,optoelectronic and photovoltaic properties of perovskites

Guanidinium (GA) cations are intentionally introduced in MAPbl3 perovskite by considering its potential capability of stabilizing the material through plenty of...     

Poly(styrene-co-p-(hexafluoro-2-hydroxy-2-propyl)-styrene) blends with syndiotactic and/or isotactic poly(methyl methacrylate)

A modified polystyrene, poly(styrene-co-p-(hexafluoro-2-hydroxy-2-propyl)styrene) (FPS), was blended with syndiotactic and/or isotactic poly(methyl methacrylate) (PMMA) in toluene. Blends were prepared under different conditions to control the self-aggregation of the PMMA segments. The formation of hydrogen bonding and the attendant changes in the aggregation or crystallization of PMMA segments were determined in the solid state by means of FTIR and DSC. The results indicate that for the binary blends, the aggregation of PMMA segments is diminished by hydrogen bonding interaction with either s-PMMA or i-PMMA, and that the interaction is stronger with the s-PMMA blends. For the ternary blends, FPS/s-PMMA/i-PMMA, the preference for stereocomplexation in the system with hydrogen bonding may be attributed to the “kink-nucleated” mechanism, which needs relatively short chain lengths of PMMA segments. Regardless of the order of addition of the components, the formation of crystalline stereocomplexes of s- and i-PMMA could be readily detected. Therefore, the miscibility of the polymer blends is dependent on the competition between the self-aggregation of the s- or i-PMMA segments, stereocomplexation and the hydrogen bonding interaction of PMMA segments with FPS.