Eutectic-Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High-Performance Lithium Metal Batteries

The deployment of lithium metal anode in solid-state batteries with polymer electrolytes has been recognized as a promising approach to achieving high-energy-density technologies. However, the practical application of the polymer electrolytes is currently constrained by various challenges, including low ionic conductivity, inadequate electrochemical window, and poor interface stability. To address these issues, a novel eutectic-based polymer electrolyte consisting of succinonitrile (SN) and poly (ethylene glycol) methyl ether acrylate (PEGMEA) is developed. The research results demonstrate that the interactions between SN and PEGMEA promote the dissociation of the lithium difluoro(oxalato) borate (LiDFOB) salt and increase the concentration of free Li⁺. The well-designed eutectic-based PAN_1.2-SPE (PEGMEA: SN=1: 1.2 mass ratio) exhibits high ionic conductivity of 1.30 mS cm⁻¹ at 30 °C and superior interface stability with Li anode. The Li/Li symmetric cell based on PAN_1.2-SPE enables long-term plating/stripping at 0.3 and 0.5 mA cm⁻², and the Li/LiFePO₄ cell achieves superior long-term cycling stability (capacity retention of 80.3 % after 1500 cycles). Moreover, Li/LiFePO₄ and Li/LiNi_0.6Co_0.2Mn_0.2O₂ pouch cells employing PAN_1.2-SPE demonstrate excellent cycling and safety characteristics. This study presents a new pathway for designing high-performance polymer electrolytes and promotes the practical application of high-stable lithium metal batteries.     

Targeted Synthesis of Isomeric Naphthalene-Based 2D Kagome Covalent Organic Frameworks

Targeted synthesis of kagome ( kgm ) topologic 2D covalent organic frameworks remains challenging, presumably due to the severe dependence on building units and synthetic conditions. Herein, two isomeric “two-in-one” monomers with different lengths of substituted arms based on naphthalene core (p-Naph and m-Naph) are elaborately designed and utilized for the defined synthesis of isomeric kgm Naph-COFs. The two isomeric frameworks exhibit splendid crystallinity and showcase the same chemical composition and topologic structure with, however, different pore channels. Interestingly, C₆₀ is able to uniformly be encapsulated into the triangle channels of m-Naph-COF via in situ incorporation method, while not the isomeric p-Naph-COF, likely due to the different pore structures of the two isomeric COFs. The resulting stable C₆₀@m-Naph-COF composite exhibits much higher photoconductivity than the m-Naph-COF owing to charge transfer between the conjugated skeletons and C₆₀ guests.     

Facile Synthesis of Metallosalphen-Based 2D Conductive Metal-Organic Frameworks for NO2 Sensing: Metal Coordination Induced Planarization

As an emerging class of promising porous materials, the development of two-dimensional conductive metal organic frameworks (2D c-MOFs) is hampered by the few categories and tedious synthesis of the specific ligands. Herein, we developed a nonplanar hexahydroxyl-functionalized Salphen ligand (6OH-Salphen) through a facile two-step synthesis, which was further applied to construct layered 2D c-MOFs through in situ one pot synthesis based on the synergistic metal binding effect of the N₂O₂ pocket of Salphen. Interestingly, the C_2v-symmetry of ligand endows Cu-Salphen-MOF with periodically heterogeneous pore structures. Benefitting from the higher metal density and shorter in-plane metal-metal distance, Cu-Salphen-MOF showcased excellent NO₂ sensing performance with good sensitivity, selectivity and reversibility. The current work opens up a new avenue to construct 2D c-MOF directly from nonplanar ligands, which greatly simplifies the synthesis and provides new possibilities for preparing different topological 2D c-MOF based functional materials.     

Hydrophobic modification of poly(phthalazinone ether sulfone ketone) hollow fiber membrane for vacuum membrane distillation

New hydrophobic poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber composite membranes coated with silicone rubber and with sol–gel polytrifluoropropylsiloxane were obtained by surface-coated modification method. The effects of coating time, coating temperature and the concentration of silicone rubber solution on the vacuum membrane distillation (VMD) properties of silicone rubber coated membranes were investigated. It was found that high water permeate flux could be gotten in low temperature and low concentration of silicone rubber solution. When the coating temperature is 60 °C, the coating time is 9 h and the concentration of silicone rubber solution is 5 g L⁻¹ the water permeate flux of the silicone rubber coated membrane is 3.5 L m⁻² h⁻¹. The prepolymerization time influence the performance of polytrifluoropropylsiloxane coated membranes, and higher prepolymerization time decrease the water permeate flux of the membrane. The water permeate flux and the salt rejection was 3.7 L m⁻² h⁻¹ and 94.6%, respectively in 30 min prepolymerization period. The VMD performances of two composite membranes during long-term operation were studied, and the results indicated that the VMD performances of two composite membranes are quite stable. The salt rejection of silicone rubber coated membrane decreased from 99 to 95% and the water permeate flux fluctuated between 2.0 and 2.5 L m⁻² h⁻¹. The salt rejection of polytrifluoropropylsiloxane coated membrane decreased from 98 to 94% and the water permeate flux fluctuated in 1 L m⁻² h⁻¹ range.     

Petal effect: a superhydrophobic state with high adhesive force

Hierarchical micropapillae and nanofolds are known to exist on the petals' surfaces of red roses. These micro- and nanostructures provide a sufficient roughness for superhydrophobicity and yet at the same time a high adhesive force with water. A water droplet on the surface of the petal appears spherical in shape, which cannot roll off even when the petal is turned upside down. We define this phenomenon as the "petal effect" as compared with the popular "lotus effect". Artificial fabrication of biomimic polymer films, with well-defined nanoembossed structures obtained by duplicating the petal's surface, indicates that the superhydrophobic surface and the adhesive petal are in Cassie impregnating wetting state.     

Surface-imprinted nanostructured layer-by-layer film for molecular recognition of theophylline derivatives

In this article we report the introduction of the cooperativity of various specific interactions combined with photo-cross-linking of the interlayers to yield binding sites that can realize better selectivity and imprinting efficiency of a surface molecularly imprinted LbL film (SMILbL), thus providing a new approach toward fabrication of nanostructured molecularly imprinted thin films. It involves preassembly of poly(acrylic acid) (PAA) conjugated of the theophylline residue template via a disulfide bridge, denoted as PAAtheo 15, in solution, and layer-by-layer (LbL) assembly of PAAtheo 15 and a positively charged photoreactive diazo resin (DAR) to form multilayer thin film with designed architecture. After photo-cross-linking of the film and template removal, binding sites specific to 7-(beta-hydroxyethyl)theophylline (Theo-ol) molecules are introduced within the film. Binding assay demonstrates that the SMILbL has a high selectivity of SMILbL to Theo-ol over caffeine. A control experiment demonstrates that the selectivity of SMILbL derives from nanostructured recognition sites among the layers. The imprinting amount per unit mass of the film can be 1 order of magnitude larger than that of the conventional bulk molecular imprinting systems. As this concept of construction SMILbL can be easily extended to the other molecules by the following similar protocol: its applications in building many other different molecular recognition systems are greatly anticipated.     

A new strategy for designing non-C2-symmetric monometallic bifunctional catalysts and their application in enantioselective cyanation of aldehydes

A monometallic bifunctional catalyst, in which only one imidazolyl moiety is directly attached at the 3-position of a binaphthol moiety, has been developed. The ligand (R)-1, which lacks C2-symmetry and flexible linkers, in combination with Ti(OiPr)4, has been demonstrated to promote the enantioselective cyanation of aldehydes with trimethylsilylcyanide (TMSCN), giving excellent enantioselectivities of up to 98 % ee and high yields of up to 99 %. The use of this bifunctional catalytic system obviates the need for additives and is extremely simple as the reagents are added in one portion at the beginning of the reaction. The protocol has been found to tolerate a relatively wide range of aldehydes when 10 mol % of the (R)-1/Ti(OiPr)4 complex is deployed in CH2Cl2 at -40 degrees C, the conditions which proved most practical and effective. The asymmetric cyanations also proceeded with lower catalyst loadings (5 mol %, or even 2 mol %), still giving satisfactory enantiomeric excesses and yields. Interestingly, the use of freshly distilled TMSCN dried over CaH2 gave a low enantioselectivity and only a moderate yield of the adduct as compared with direct use of the commercial reagent. The results of 13C NMR spectroscopic studies implicate HCN as the actual reactive nucleophile.     

Reinforced self-assembly of hexa-peri-hexabenzocoronenes by hydrogen bonds: from microscopic aggregates to macroscopic fluorescent organogels

Hexa-peri-hexabenzocoronene derivatives (HBCs) that have hydrogen-bonding functionalities (either amido or ureido groups) adjacent to the aromatic cores have been synthesized to study the effects of intracolumnar hydrogen bonds on the self-assembly behavior of HBCs. The hydrogen bonds effectively increased the aggregation tendency of these compounds in solution. In the bulk state, the typical columnar supramolecular arrangement of HBCs was either stabilized substantially (1 a, 1 b, 2 a, and 2 b), or suppressed by dominant hydrogen-bonding interactions (3). For some of the compounds (1 a, 2 a, and 2 b), the supramolecular arrangement adopted in the liquid-crystalline state was even retained after annealing, presumably owing to the reinforcement of the pi-stacking interactions by the hydrogen bonds. Additionally, the combined effect of the hydrogen bonds and pi-stacking of the aromatic moieties led to the formation of fluorescent organogels, whereby some derivatives were further investigated as novel low molecular-mass organic gelators (LMOGs).     

Development of polymethylphenylsiloxane-coated fiber for solid-phase microextraction and its analytical application of qualitative and semi-quantitative of organochlorine and pyrethroid pesticides in vegetables

An approach to the synthesis of hydroxyl-terminated polymethylphenylsiloxane (PMPS-OH) was proposed and the synthesized PMPS-OH was successfully applied as a precursor to prepare a novel coating for solid-phase microextraction (SPME) via the sol-gel process. The thickness and length of the prepared coating was 70 μm and 1.5 cm, respectively. The extraction efficiency of the PMPS-coated fiber for selected pesticides was higher than that of commercial fibers including 100 μm polydimethylsiloxane (PDMS), 85 μm polyacrylate (PA) and 65 μm polydimethylsiloxane/divinylbenzene (PDMS/DVB). The influence of the extraction process, extraction temperature, extraction time, stirring rate, ionic strength, GC inlet conditions, desorption temperature and time for PMPS-coated fiber application was studied and optimized. Several experiments were carried out to evaluate the analytical characteristics of the proposed SPME-GC-ECD method under optimized conditions. The linearity was from 0.5 to 100 ng g⁻¹ for p,p′-DDE, p,p′-DDD and bifenthrin, and from 2 to 100 ng g⁻¹ for o,p′-DDT, p,p′-DDT, fenpropathrin, beta-cyfluthrin and cyhalothrin. The detection limits of these pesticides were between 0.13 and 1.45 ng g⁻¹. The recovery of the pesticides spiked in various vegetables at 4 ng g⁻¹ ranged from 42.9% to 105.3%, and the relative standard deviations were less than 16.2%.     

Diversity of Chemical Constituents from Saxifraga Montana H.

A thorough phytochemical investigation of the whole plant of Saxifraga montana H. afforded a new glucoside, methyl 6″‐O‐(E)‐p‐hydroxycinnamoxyl‐glucosyringate ( 1 ), and seventeen known natural products, 3‐methyl‐6‐methoxy‐3,4‐dihydroisocoumarin‐8‐O‐β‐D‐glucospyranoside ( 2 ), gallic acid ( 3 ), glucosyringic acid ( 4 ), daphnoretin ( 5 ), chamaejasmoside ( 6 ), myricetin ( 7 ), quercetin ( 8 ), quercetin‐3‐O‐β‐D‐galactopyranoside ( 9 ), quercetin‐3‐O‐α‐L‐arabinoside ( 10 ), quercetin‐3‐O‐β‐D‐glucospyranoside ( 11 ), rutin ( 12 ), quercetin‐3‐O‐β‐D‐glucopyranosyl (6‐1) glucopyranoside ( 13 ), ursolic acid ( 14 ), 5,28‐stigmastadien‐3β‐ol ( 15 ), β‐sitosterol ( 16 ), β‐daucosterin ( 17 ), 6′‐palmitoxyl‐β‐daucosterin ( 18 ). On the basis of various spectroscopic methods, especially intensive 2D‐NMR (COSY, HMQC and HMBC), FAB‐MS and HR‐ESI‐MS techniques, their structures were elucidated.