The accumulation of As and Cd in Brassica juncea plants and the formation of complexes of these elements with bioligands such as glutathione and/or phytochelatins (PCs) is studied. The genetic manipulation of these plants to induce higher As and Cd accumulation has been achieved by overexpressing the genes encoding for gamma-glutamyl cysteine synthetase (gamma-ECS) and glutathione synthetase (GS). These two enzymes are responsible for glutathione (GSH) formation in plants, which is the first step in the production of PCs. The biomass produced in both the wild type and the genetically modified plants, has been evaluated. Additionally, the total Cd and As concentration accumulated in the plant tissues was measured by inductively coupled plasma mass spectrometry (ICP-MS) after extraction. Speciation studies on the extracts were conducted using size exclusion liquid chromatography (SEC) coupled online with ICP-MS to monitor As, Cd and S. For further purification of the As fractions, reversed phase high performance liquid chromatography (RP-HPLC) was used. Structural elucidation of the PCs and other thiols, as well as their complexes with As and Cd, was performed by electrospray-quadrupole-time-of-flight (ESI-Q-TOF). In both the Cd and As exposed plants it was possible to observe the presence of oxidized PC2 ([M + H]+, m/z 538), GS-PC2(-Glu) ([M + H]+, m/z 716) as well as reduced GSH ([M + H]+, m/z 308) and oxidized glutathione (GSSG) ([M + H]+, m/z 613). However, only the GS plants exhibited the presence of As(GS)3 complex ([M + H]+, m/z 994) that was further confirmed by MS/MS. This species is reported for the first time in B. juncea plant tissues. 相似文献
A promoted SmI2 direct reaction of dibromoacetic acid with different aldehydes, followed by an elimination reaction also promoted by samarium diiodide, affords (E)-alpha,beta-unsaturated carboxylic acids 2 with total stereoselectivity. A mechanism to explain this transformation is proposed. 相似文献
A procedure for arsenic species fractionation in alga samples (Sargassum fulvellum, Chlorella vulgaris, Hizikia fusiformis and Laminaria digitata) by extraction is described. Several parameters were tested in order to evaluate the extraction efficiency of the process: extraction medium, nature and concentration (tris(hydroxymethyl)aminomethane, phosphoric acid, deionised water and water/methanol mixtures), extraction time and physical treatment (magnetic stirring, ultrasonic bath and ultrasonic focussed probe). The extraction yield of arsenic under the different conditions was evaluated by determining the total arsenic content in the extracts by ICP-AES. Arsenic compounds were extracted in 5 mL of water by focussed sonication for 30 s and subsequent centrifugation at 14,000 × g for 10 min. The process was repeated three times. Extraction studies show that soluble arsenic compounds account for about 65% of total arsenic.
An ultrafiltration process was used as a clean-up method for chromatographic analysis, and also allowed us to determine the extracted arsenic fraction with a molecular weight lower than 10 kDa, which accounts for about 100% for all samples analysed.
Speciation studies were carried out by HPLC–ICP-AES. Arsenic species were separated on a Hamilton PRP-X100 column with 17 mM phosphate buffer at pH 5.5 and 1.0 mL min−1 flow rate. The chromatographic method allowed us to separate the species As(III), As(V), MMA and DMA in less than 13 min, with detection limits of about 20 ng of arsenic per species, for a sample injection volume of 100 μL. The chromatographic analysis allowed us to identify As(V) in Hizikia (46 ± 2 μg g−1), Sargassum (38 ± 2 μg g−1) and Chlorella (9 ± 1 μg g−1) samples. The species DMA was also found in Chlorella alga (13 ± 1 μg g−1). However, in Laminaria alga only an unknown arsenic species was detected, which eluted in the dead volume. 相似文献
Ultrasonic slurry sampling electrothermal vaporisation inductively coupled plasma mass spectrometry (USS-ETV-ICP-MS) was applied to the elemental analysis of silicate based minerals, such as talc or quartz, without any pre-treatment except the grinding of the sample. The electrothermal vaporisation device consists of a tungsten coil connected to a home-made power supply. The voltage program, carrier gas flow rate and sonication time were optimised in order to obtain the best sensitivity for elements determined. The relationship between the amount of sample in the slurry and the signal intensity was also evaluated. Unfortunately, in all cases, quantification had to be carried out by the standard additions method owing to the strong matrix interferences. The global precision of the proposed method was always better than 12%. The limits of detection, calculated as three times the standard deviation of the blank value divided by the slope of the calibration curve, were between 0.5 ng/g for As and 3.5 ng/g for Ba. The method was validated by comparing the concentrations found for Cu, Mn, Cr, V, Li, Pb, Sn, Mg, U, Ba, Sr, Zn, Sb, Rb and Ce using the proposed methodology with those obtained by conventional nebulisation ICP-MS after acid digestion of the samples in a microwave oven. The concentration range in the solid samples was between 0.2 μg/g for Cr and 60 μg/g for Ba. All results were statistically in agreement with those found by conventional nebulisation. 相似文献
Competitive electrochemical enzyme-linked immunosorbent assays based on disposable screen-printed electrodes have been developed for quantitative determination of ochratoxin A (OTA). The assays were carried out using monoclonal antibodies in the direct and indirect format. OTA working range, I50 and detection limits were 0.05-2.5 and 0.1-7.5 μg L−1, 0.35 (±0.04) μg L−1 and 0.9 (±0.1) μg L−1, 60 and 100 μg L−1 in the direct and indirect assay format, respectively. The immunosensor in the direct format was selected for the determination of OTA in wheat. Samples were extracted with aqueous acetonitrile and the extract analyzed directly by the assay without clean-up. The I50 in real samples was 0.2 μg L−1 corresponding to 1.6 μg/kg in the wheat sample with a detection limit of 0.4 μg/kg (calculated as blank signal −3σ). Within- and between-assay variability were less than 5 and 10%, respectively. A good correlation (r = 0.9992) was found by comparative analysis of naturally contaminated wheat samples using this assay and an HPLC/immunoaffinity clean-up method based on the AOAC Official Method 2000.03 for the determination of OTA in barley. 相似文献
A new method for the electrophoretic separation of nine phenolic acids (derivatives of benzoic and cinnamic acids) with contactless conductometric detection is presented. Based on theoretical calculations, in which the mobility of the electrolyte co- and counterions and mobility of analytes are taken into consideration, the electrolyte composition and detection mode was selected. This approach was found to be especially valuable for optimization of the electrolyte composition for the separation of analytes having medium mobility. Indirect conductometric detection mode was superior to the direct mode as predicted theoretically. The best performance was achieved with 150 mM 2-amino-2-methylpropanol electrolyte at pH 11.6. The separation was carried out in a counter-electroosmotic mode and completed in less than 6 min. The LODs achieved were about 2.3-3.3 microM and could be further improved to 0.12-0.17 microM by using a sample stacking procedure. The method compares well to the UV-Vis detection. 相似文献
Functionalized bicyclic 1,3-cyclohexadienes can be easily prepared by a new cascade reaction which involves the Ru-catalyzed addition of acyclic alkenes to 1,6-diynes to give (Z)-hexatrienes, followed by a pure thermal 6e-pi electrocyclization. 相似文献
New alkynyl complexes [Pt2M4{CC(3-OMe)C6H4}8] (M = Ag 1, Cu 2) have been synthesized and their structures and properties compared to those of related [Pt2M4(CCPh)8] compounds. For the Pt-Ag derivatives, the X-ray structures of the discrete yellow solvate monomer, [Pt2Ag4{CC(3-OMe)C6H4}8].2THF ([1.2THF]), and the dark garnet unsolvated polymeric form, [Pt2Ag4{CC(3-OMe)C6H4}8](infinity) ([1](infinity)), are presented. The yellow form ([1.2THF]) exhibits a distorted octahedral geometry of the metal centers with the platinum atoms mutually trans and the four silver atoms in the equatorial plane. Pairs of Ag atoms are weakly bridged by THF molecules [mu-Ag2...O(THF)]. The garnet form ([1](infinity)) has an unprecedented infinite stacked chain of octahedral clusters linked by short Pt...Pt bonds (3.1458(8) A). In both forms, different types of weak C-H...O (OMe) hydrogen bonds are observed. For comparative purposes, we have also provided the crystal structures of the yellow monomer form, [Pt2Ag4-(CCPh)8].CHCl3, and the red dimer form, [Pt2Ag4(CCPh)8]2 (Pt-Pt 3.221(2) A). These clusters display intense photoluminescence in both solution and the solid state, at room temperature and 77 K. The emission observed for the yellow form [1.2THF] in the solid state is assigned to a 3MLM'CT [Pt(d)/pi(CCR) --> Pt(p(z))/Ag(sp)/pi(CCR)] state modified by Pt...Ag, Ag...Ag, and Ag...(THF) contacts. However, in the garnet form [1](infinity) and in 2, the emissions are related to the axial Pt-Pt bonds and are assigned as phosphorescence from a metal-metal-to-ligand charge-transfer (3MMLCT) excited state ([1](infinity)), or an admixture of a metal-metal (Pt-Pt) centered 3(dsigmap(z)sigma) and 3MMLCT excited state (2). For 1, a remarkable quenching and a shift to higher energies in the emission is observed on changing from CH2Cl2 to THF, and for both 1 and 2, the emission spectra at 77 K varies with the concentration, showing their tendency to stack even in glass. 相似文献
Reaction of nickel(II) acetate with H(3)L (2-(5-bromo-2-hydroxyphenyl)-1,3-bis[4-(5-bromo-2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) yields [Ni(2)L(OAc)(H(2)O)(2)].3MeCN.2H(2)O (1.3MeCN.2H(2)O), crystallographically characterized. 1 is unstable in solution for a long time and hydrolyzes to give [Ni(2)L(o-OC(6)H(3)BrCHO)(H(2)O)].2.25MeCN.H(2)O (2.2.25MeCN.H(2)O). In addition, 1 uptakes CO(2) from air in a basic methanol/acetonitrile solution, yielding [[Ni(2)L(MeOH)](2)(CO(3))].1.5MeOH.MeCN.H(2)O (3.1.5MeOH.MeCN.H(2)O). The X-ray characterization of 3 reveals that it is a tetranuclear nickel cluster, which can be considered as the result of a self-assembly process from two dinuclear [Ni(2)L](+) blocks, joined by a mu(4)-eta(2):eta(2)-O,O carbonate ligand. The coordination mode of the carbonate anion is highly unusual and, to the best of our knowledge, it has not been described thus far for first-row transition metal complexes or magnetically studied until now. Magnetic characterization of 1 and 3 shows net intramolecular ferromagnetic coupling between the metal atoms in both cases, with S = 2 and S = 4 ground states for 1 and 3, respectively. 相似文献
2-Arylsulfanyl- and benzylsulfanylpyridinium N-arylimides (2), easily available from tetrazolo[1,5-b]pyridinium salts (1), participate in 1,3-dipolar cycloaddition with aryl isothiocyanates and aryl isocyanates to result in formation of fused thioxo- and oxo[1,2,4]triazolium salts (5 and 12), respectively. This transformation is interpreted as a regular 1,3-cycloaddition followed by spontaneous elimination of the aryl- or benzylsulfanyl group. Formation of these triazolium salts can be followed--under appropriate reaction conditions--by ring-opening reactions to afford some new triazolyldienes (6). Recognition of the intermediate participation of the thiolate anion along the pathway 1 --> 5 allowed elaboration of a simple procedure to 5 implying a tandem reaction sequence. 相似文献