Photocrosslinkable vinylamine copolymers. I. Synthesis and photosensitivity of cinnamoylated polyvinylamine

Vinylamine copolymers prepared by the Hofmann reaction were functionalized by amidification with cinnamoyl chloride. The resulting photosensitive polymers, which are the nitrogen analogues of poly(vinylcinnamate), can be prepared with various contents of cinnamamide side groups. The polymers exhibit a marked hydrophilicity and undergo efficient crosslinking upon exposure to 250–300 nm UV light. The sensitivity S expressed in cm²·J⁻¹ was shown to be higher for a given content, τ, in cinnamamide groups expressed in mol·g⁻¹ when the residual vinyl amine units are in the ammonium form. The dependence of S upon τ was of the second order for the free base form of the photopolymers, but a higher order with S approximately proportional to τ³ for the hydrochloride form of the photosensitive polymers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2513–2520, 1997     

Design,Synthesis, Biological Evaluation and In Silico Study of Benzyloxybenzaldehyde Derivatives as Selective ALDH1A3 Inhibitors

Aldehyde dehydrogenase 1A3 (ALDH1A3) has recently gained attention from researchers in the cancer field. Several studies have reported ALDH1A3 overexpression in different cancer types, which has been found to correlate with poor treatment recovery. Therefore, finding selective inhibitors against ALDH1A3 could result in new treatment options for cancer treatment. In this study, ALDH1A3-selective candidates were designed based on the physiological substrate resemblance, synthesized and investigated for ALDH1A1, ALDH1A3 and ALDH3A1 selectivity and cytotoxicity using ALDH-positive A549 and ALDH-negative H1299 cells. Two compounds (ABMM-15 and ABMM-16), with a benzyloxybenzaldehyde scaffold, were found to be the most potent and selective inhibitors for ALDH1A3, with IC₅₀ values of 0.23 and 1.29 µM, respectively. The results also show no significant cytotoxicity for ABMM-15 and ABMM-16 on either cell line. However, a few other candidates (ABMM-6, ABMM-24, ABMM-32) showed considerable cytotoxicity on H1299 cells, when compared to A549 cells, with IC₅₀ values of 14.0, 13.7 and 13.0 µM, respectively. The computational study supported the experimental results and suggested a good binding for ABMM-15 and ABMM-16 to the ALDH1A3 isoform. From the obtained results, it can be concluded that benzyloxybenzaldehyde might be considered a promising scaffold for further drug discovery aimed at exploiting ALDH1A3 for therapeutic intervention.     

Carbocation-forming reactions in dimethyl sulfoxide

Mesylate derivatives of 3-aryl-3-hydroxy-beta-lactams and thiolactams react in DMSO-d(6) by first-order processes to give alcohol products. Substituent effect studies implicate carbocation intermediates (ion-pairs) that are captured by DMSO-d(6) to give transient oxosulfonium ions. Rapid reaction of the oxosulfonium ions with trace amounts of water leads to the alcohol product and regenerates DMSO-d(6). H(2)(17)O labeling studies show that (17)O is incorporated into the DMSO. The mesylate derivatives of endo- and exo-2-hydroxy-2-phenylbicyclo[2.2.1]heptan-3-one also react in DMSO-d(6) to give the alcohol products. Ion-pair intermediates that capture DMSO giving unstable oxosulfonium ions are again proposed. Exo-2-phenyl-endo-bicyclo[2.2.1]heptyl trifluoroacetate readily eliminates trifluoroacetic acid in DMSO-d(6) via a cationic mechanism involving loss of the endo-trifluoroacetate leaving group as well as an exo-hydrogen. The O-methyl oxime derivative of alpha-chloro-alpha,alpha-diphenylacetophenone reacts in DMSO-d(6) to give 1-methoxy-2,3-diphenylindole, a product derived from cyclization of a cationic intermediate. A common ion rate suppression provides further evidence for a cationic mechanism. The triflate derivative of pivaloin reacts by a cationic mechanism in DMSO-d(6) to give rearranged products. The rate is even faster than in highly ionizing solvents such as trifluoroethanol or trifluoroacetic acid. 1-Adamantyl mesylate reacts in DMSO-d(6) by a first-order process (Y(OMs) = -4.00) to give a long-lived oxosulfonium ion, 1-Ad-OS(CD(3))(2)(+), which can be characterized spectroscopically. This oxosulfonium ion reacts only slowly with water at elevated temperatures to give 1-adamantanol. DMSO is therefore a viable solvent for k(s), k(C), and k(Delta) cationic processes.     

Effect of non-significant proportional bias in the final measurement uncertainty

The trueness of an analytical method can be assessed by calculating the proportional bias of the method in terms of apparent recovery. If the apparent recovery does not differ significantly from one, the analytical method has not a significant bias. If this is the case, the bias is neglected and the uncertainty associated with this bias is included in the uncertainty budget of results. However, when assessing trueness there is always a probability of incorrectly concluding that the proportional bias is not significant. Therefore, the uncertainty of results may be underestimated. In this paper, we study how non-significant bias affects the uncertainty of analytical results. Moreover, we study how to avoid the underestimation of uncertainty by including the non-significant bias calculated in the uncertainty budget. To answer these questions, we have used the Monte-Carlo method to simulate the process of estimating the apparent recovery of a biased analytical method and, subsequently, the future results this method provides. The results of the simulation show that non-significant bias may underestimate the uncertainty of analytical results when bias contributes in more than 20% to the overall uncertainty. Uncertainty is specially underestimated when bias contributes in more than 50% to the overall uncertainty.     

Biomimetic Bottlebrush Polymer Coatings for Fabrication of Ultralow Fouling Surfaces

Demand for long‐lasting antifouling surfaces has steered the development of accessible, novel, biocompatible and environmentally friendly materials. Inspired by lubricin (LUB), a component of mammalian synovial fluid with excellent antifouling properties, three block polymers offering stability, efficacy, and ease of use were designed. The bottlebrush‐structured polymers adsorbed strongly on silica surfaces in less than 10 minutes by a simple drop casting or online exposure method and were extremely stable in high‐salinity solutions and across a wide pH range. Antifouling properties against proteins and bacteria were evaluated with different techniques and ultralow fouling properties demonstrated. With serum albumin and lysozyme adsorption <0.2 ng cm^?2, the polymers were 50 and 25 times more effective than LUB and known ultralow fouling coatings. The antifouling properties were also tested under MPa compression pressures by direct force measurements using surface forces apparatus. The findings suggest that these polymers are among the most robust and efficient antifouling agents currently known.     

Copper-Photocatalyzed Borylation of Organic Halides under Batch and Continuous-Flow Conditions

The copper-photocatalyzed borylation of aryl, heteroaryl, vinyl and alkyl halides (I and Br) was reported. The reaction proceeded using a new heteroleptic Cu complex under irradiation with blue LEDs, giving the corresponding boronic-acid esters in good to excellent yields. The reaction was extended to continuous-flow conditions to allow an easy scale-up. The mechanism of the reaction was studied and a mechanism based on a reductive quenching (Cu^I/Cu^I*/Cu⁰) was suggested.     

Two-Photon Absorption and Cell Imaging of Fluorene-Functionalized Epicocconone Analogues

Epicocconone 1 is a natural chromophore isolated from the fungus Epicoccum nigrum that has shown applications in proteomics and fluorescent microscopy thanks to its unique pro-fluorescence properties. The modification of the skeleton of the natural product by replacing the triene side chain by a fluorenyl scaffold can noticeably increase the fluorophore's absorption coefficient. The synthesis of the analogues of the natural product has been made possible by the use of a palladium-catalyzed carbonylation reaction, allowing the construction of the β-keto-dioxinone key intermediate. Two-photon absorption cross-section measurements of the fluorenyl epicocconone analogues show a structure dependency with values ranging from 60 to 280 GM and live cell imaging show intense staining of intracellular vesicle-like structures around the nucleus.     

Dearomatization of 3-Nitroindoles with Highly γ-Functionalized Allenoates in Formal (3+2) Cycloadditions

3-Nitroindoles are easily reacted with highly substituted γ-allenoates in the presence of a commercially available phosphine catalyst. For instance, allenoates derived from biomolecules such as amino and deoxycholic acids are combined for the first time with 3-nitroindole. The corresponding dearomatized (3+2) tricyclic cycloadducts are obtained as α-regioisomers exclusively. DFT computations shed light on this multi-step reaction mechanism and on the selectivities observed in the sequence.