Reactions of tetrafluoroethylene oligomers. Part 1. Some pyrolytic reactions of the pentamer and hexaher and of the fluorine adducts of the tetramer and pentamer

Pyrolyses of these highly branched fluorocarbons over glass beads caused the preferential thermolyses of CC bonds where there is maximum carbon substitution. Fluorinations of perfluoro-3,4-dimethylhex-3-ene (tetramer) (I) and perfluoro-4-ethyl-3,4-dimethylhex- 2-ehe (pentamer) (II) over cobalt (III) fluoride at 230° and 145° respectively afforded the corresponding saturated fluorocarbons (III) and (IV), though II gave principally the saturated tetramer (III) at 250°. Pyrolysis of III alone at 500—520° gave perfluoro-2-methylbutane (V), whilst pyrolysis of III in the presence of bromine or toluene afforded 2-bromononafluorobutane (VI) and 2H-nonafluorobutane (VII) respectively. Pyrolysis of perfluoro-3-ethyl-3, 4-dimethylhexane (IV) alone gave a mixture of perfluoro-2-methylbutane (V), perfluoro-2-methylbut-1-ene (VIII), perfluoro-3-methylpentane (IX), perfluoro-3,3-dimethylpentane (X), and perfluoro-3,4- dimethylhexane (III). Pyrolysis of IV in the presence of bromine gave (VI) and 3-bromo-3-trifluoromethyl-decafluoropentane (XI): with toluene, pyrolysis gare VlI and 3H-3-trifluoromethyldecafluoropentane (XII). Pyrolysis of II at 500° over glass gave perfluoro-1,2,3-trimethylcyclobutene (XIII) and perfluoro-2,3-dimethylpenta-1,3(E)- and (Z)-diene (XIV) and (XV) respectively. The diene mixture (XIV and XV) was fluorinated with CoF₃ to give perfluoro-2,3-dimethylpentane (XVI) and was cyclised thermally to give the cyclobutene (XIII). Pyrolysis of perfluoro-2- (1′-ethyl-1′-methylpropyl)-3-methylpent-1-ene (XVII) (TFE hexamer major isomer) at 500° gave perfluoro-1-methyl-2-(1′-methylpropyl)cyclobut-1-ene (XVIII) and perfluoro-2-methyl-2-(1′-methylpropyl)buta-1,3-diene (XIX). Fluorination of XVIII over CoF₃ gave perfluoro-1-methyl-2- (1′-methylpropyl)cyclobutane (XX), which on co-pyrolysis with bromine gave VI. XIX on heating gave XVIII. Reaction of XVIII with ammonia in ether gave a mixture of E and Z 1′-trifluoromethyl-2-(1′-trifluoromethyl- pentafluoropropyliden-1′-yl)tetrafluorocyclobutylamine (XXI) which on diazotisation and hydrolysis afforded 2-(2′trifluoromethyl- tetrafluorocyclobut-1-en-1′-yl)-octafluorobutan-2-ol (XXII).     

DFT and TD‐DFT investigation of IR and UV spectra of solvated molecules: Comparison of two SCRF continuum models

We report the calculation of liquid‐phase infrared (IR) and ultraviolet (UV) spectra in the framework of the solute's response to the reaction field of several solvents. In particular, we compare these two properties for the multipolar expansion model developed in the Nancy continuum model (NCM) and the polarized continuum model (PCM) scheme developed in Pise and Naples. All calculations are carried out at the (TD‐)DFT/6–311G(2d,2p) level of theory. The cavity size used for modeling the solute effects on the IR and UV spectra are examined. To calibrate the solute cavity size, we have investigated the IR spectra of coumarin and of a set of 14 additional solutes of different size and polarity in several dielectrical surroundings. It turns out that: (i) PCM and NCM present an identical behavior when a common cavity is used to calibrate the models; and (ii) for both NCM and PCM models, the IR spectra are highly sensitive to the solute and solvent polarity. The UV/VIS investigation of coumarin derivatives demonstrates that both models provide close estimates of λ_max independent of the solute cavity size. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Accurate Ab Initio Calculations for LiH and its Ions, LiH+ and LiH−

Ab initio calculations were performed for LiH using a pseudopotential approach with CPP corrections and huge basis sets on both atoms. A wide range of ^1,3Σ⁺ electronic adiabatic states have been investigated, from the ground state up to those dissociating into Li(5p)+H. Permanent and transition electric dipole moments are also considered for the first few excited states. Comparison with experiments and recent all-electron calculations, reveals an excellent global accuracy, only the bottom of the ground state being better described by all-electron approaches. Using almost identical basis sets, coupled cluster all-electron calculations are performed for the ground states of LiH⁺, LiH⁻ and LiH. High care has been given to the correct relative position of the asymptotes, allowing for this rather complete set of accurate ab initio data to be useful for further molecular physics studies.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS—I. SPIN TRAPPING OF PHOTOLYSIS PRODUCTS FROM SULFANILAMIDE, 4-AMINOBENZOIC ACID AND RELATED COMPOUNDS

The photodecomposition of sulfanilamide, 4-aminobenzoic acid and other related analogs has been studied with the aid of the spin trap 2-methyl-2-nitrosopropane. UV photolysis of an aqueous solution of sulfanilamide yielded the following radicals C˙₆H₄SO₂NH₂, C₆H₅SO_2˙, S˙O₂NH₂ and SO^-_#˙ (or SO^-_2dot;). Under the same conditions 4-aminobenzoic acid gave C˙₆H₄COOH. In addition both sulfanilamide and 4-aminobenzoic acid, but not 4-dimethylaminobenzoic acid, generated e^-_aq or hydrogen atoms during UV irradiation. The C₆H₄SO₂NH₂ radical was also produced by photolysis of 4-iodobenzenesul-fonamide and 4-nitrobenzenesulfonamide. The C₆H₄COOH radical was generated by photolysis of 4-nitrobenzoic acid and 4-iodobenzoic acid. Finally the C₆H₄NO₂ radical was formed during the irradiation of 4-nitroaniline, 1,4-dinitrobenzene and 4-iodonitrobenzene. The free radicals generated by sulfanilamide and 4-aminobenzoic acid may play an important role in the phototoxic and photoallergic responses elicited by these drugs in certain individuals.     

Identification of a major new involatile N-nitroso compound in smoked bacon

The new N-nitroso compound identified in smoked bacon is 2-(hydroxymethyl)-3-nitrosothiazolidine-4-carboxylic acid. Identification was based on comparison of data from liquid chromatography, capillary gas chromatography and mass spectrometry with those for the authentic compound, the synthesis of which is described.     

Isotopic metrology of carbon dioxide. I. Interlaboratory comparison and empirical modeling of inlet equilibration time,inlet pressure,and ion source conductance

We report a pilot study of high-precision differential isotope ratio measurements made on replicate samples of pure carbon dioxide using three instruments of identical manufacture. Measurement protocols were designed to explore the effects of sample size, ion source conductance, and inlet changeover equilibration time on the raw measurements. Our goal was better understanding of factors that influence these measurements in order to establish procedures for highly reproducible and accurate determinations of Reference Material (RM) isotopic compositions. Evaluation and modeling of reported data illuminated effects consistent with two instrumental memory sources--one short-lived (t((1/2)) approximately 10 s) and the other long-lived (t((1/2)) approximately 6-10 min), uncompensated by normal background measurements--that can significantly influence measurements made by the dual inlet method. These biases, proportional to the difference in isotopic compositions between the measured sample and reference gases, decrease in magnitude with increasing sample size, source conductance, and equilibration time. We observed biases as high as 0.1 per thousand per 10 per thousand difference between sample and reference gases. These memory sources may be responsible for measured delta(13)C values of RMs generally being highly reproducible within any single laboratory but less reproducible among independent laboratories. The magnitude of the bias is consistent with the ranges of delta(13)C values reported in prior laboratory intercomparisons. Uncertainties are most likely due to high and variable long-lived memory among the instruments tested.     

Chemical Analysis of Organometallic Compounds

An organometallic complex obtained by mixing Me₃Al and Cl₂TiCp₂ reacts with acetylenes to form monocarbometallated products in favorable cases, while dehydrometallation and polymerization compete in the cases of dialkylacetylenes having propargylic hydrogens and terminal acetylenes, respectively.     

The modified `phosphine imide' reaction: a safe and soft alternative ureas synthesis

In this work we present a new way for the direct and general synthesis of urea compounds from primary amines by the modified `phosphine imide' reaction. A large panel of amine structures are compatible with the smooth reaction conditions. Particularly in the case of sensitive l-aminoesters, it is interesting to note that the stereochemistry at the asymmetric centre was unmodified in the reaction conditions.     

Preparation and structure of mixed tungsten bronzes containing tin and europium

An isothermal section has been established for the system Eu_xWO₃Sn_yWO₃ at 1000°C from X-ray powder and single-crystal data and Mössbauer spectroscopy and chemical analyses. A single-phase region with the (12 × 3) tetragonal structure has been established. Single-crystal X-ray analysis shows that the Sn and Eu occupy pentagonal tunnel sites. Mössbauer spectroscopy shows that both Sn(II) and Eu(II) are present. The extent of the single-phase field is controlled by two factors: First, the ratio $\text{Eu}\text{Sn}$ must be <1, and second, the supernumerary electron concentration per WO₃ must be <0.6.     

X=Y-ZH system as potential 1,3-dipoles. Part 59: Cascade 1,3-azaprotio cyclotransfer-1,3-dipolar cycloaddition (1,3-APT-1,3-DC) reactions of benzobicyclo[3.3.1]non-5-en-9-one oxime

Preparation of some novel spiro-oxazolidines related to 3, which is known to posses anorectic and antidepressant activity, via 1,3-APT-1,3-DC cascades of the oxime of benzobicyclo[3.3.1]non-5-en-9-one 1 is described. Substrate 1 allows the influence of the two bridges on the cascade to be assessed with respect to the configuration of the nitrone that is generated and the facial selectivity of the subsequent cycloaddition.