聚丙烯与SBS嵌段共聚物共混时的结晶行为

用偏光显微镜,小角光散射,动态力学测量和DSC等方法研究了聚丙烯和SBS共混物的结晶行为。结果表明,SBS的混入可以降低聚丙烯的结晶程度和阻碍球晶的形成,因而有利于提高聚丙烯塑料的抗冲击性能。从DSC实验也看到共混物中的聚丙烯具有较高的结晶速率。     

洋葱状富勒烯的提纯研究

以石墨粉为碳源, Al为催化剂, 采用真空热处理法制备了平均粒径为15～35 nm的洋葱状富勒烯(OLFs).并用CS₂分离和空气氧化法对得到的OLFs初产品进行了提纯处理.高分辨透射电镜(HRTEM)、X射线衍射(XRD)、热重分析(TGA)对提纯前后样品的分析表明, CS₂分离处理可有效去除初产品中裸露的金属催化剂微粒,然后在空气中610 ℃焙烧200 min,可基本去除无定型碳,并大量去除了石墨状碎片等碳杂质, OLFs的纯度在50％(体积分数)以上.     

Agonist–PPARγ interactions: Molecular modeling study with docking approach

Docking simulation of 18 agonists with the ligand binding pocket (LBP) of PPARγ has been performed. The binding conformations and binding affinities of these agonists were obtained by use of the flexible docking protocol FlexX. Test compound calculations indicated that FlexX can reproduce the binding conformation of the crystal structure (root mean square deviation = 1.43 Å); moreover, the predicted binding affinities correlate well with the activities of these agonists. The interaction model and pharmacophore of PPARγ agonists were derived and the difference in biologic activities of these agonists can be well explained. The PPARγ agonists must have both polar head and the hydrophobic tail, which form hydrogen bonds and hydrophobic contacts with hydrophilic and hydrophobic regions of the LBP of PPARγ, respectively. In addition, a suitable linker is also necessary. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 405–410, 2003     

压力、温度和晶粒尺寸对Fe-N合金的合成及结构的影响

在 1× 1 0 - 3 Pa～ 4 GPa的压力和 5 80～ 930 K温度范围内 ,利用高压技术并结合机械球磨 ,研究了压力、温度和晶粒尺寸对α-Fe与非晶 BN的固态反应的影响 .发现高压和晶粒细化可以极大地促进α-Fe和非晶 BN的固态反应过程 ,α-Fe与非晶 BN发生固态反应的临界晶粒尺寸约 8nm.压力和温度对反应产物及其晶体结构有明显影响 .2 GPa和 80 0 K时 ,反应产物为具有正交结构的 Fe-N新相 ;在 3～ 4 GPa和 690～80 0 K时 ,可形成单一ε-Fex N合金相 ;而在 4 GPa和 930 K以上 ,反应产物由 Fe-N合金相转变为 Fe3B相     

具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

Voltammetric determination of 5-hydroxydole-3-acetic acid in human gastric juice

A method for the determination of the major serotonin metabolite — 5-hydroxyindole-3-acetic acid (5-HIAA) in human gastric juice by cyclic voltammetry was described. The measurement conditions were investigated. The potential window was chosen from +0.1 to +0.9 V, the supporting electrolyte was 0.025 M PBS solution (pH 2.0). The method allowed determination in the concentration range from 2.0 ×10⁻⁷ to 2.0 ×10 ⁻⁵ M and a detection limit of 80 nM. When samples of gastric juice were analyzed with the method, we obtained the mean content of 5-HIAA in the gastric juice. Meanwhile, interference from other ions and substances were examined. The experimental results indicate that the method for the determination of gastric juice samples is successful.     

硫堇褪色光度法测定微量肝素

在pH 4.10的Britton-Robinson缓冲溶液中,肝素与碱性吩噻嗪染料硫堇形成离子缔合物时,染料发生明显的褪色。体系吸光度的降低与肝素钠浓度成正比,肝素的质量浓度在0~60μg/25 mL范围内符合比耳定律,摩尔吸光系数为3.58×106L.mol-1.cm-1。研究了表面活性剂和共存物质的影响,表明方法选择性好。用于肝素钠注射液效价的测定,相对标准偏差小于3%,回收率为96.5%~101.9%。     

煤微孔表面的分形维数及其变化规律的研究

本文利用气体吸附数据确定了各种煤阶煤（从褐煤到无烟煤）和煤焦气化反应过程中微孔表面的分形维数及其变化规律。这有助于进一步认识煤的孔结构特征。     

卟啉酞菁模型化合物光致电子转移研究

本文采用时间相关单光子计数对卟啉酞菁ＴＴＰ－（ＣＨ２）ｎ－Ｐｃ模型化合物的光致电子转移进行了研究，发现激发Ｐｃ时，呈现单指数衰减，ｎ＝４时电子转移速率减小，活化能，重排能增加，电子转移效率下降，电子转移反应△ＧＣＳ与电荷分离活化络合物衰变速率ＫＣＴ，按以下规律：△Ｇ＾（５）ＣＳ〉△＾（３）ＣＳ〉△＾（４）ＣＳ〉△＾（２）ＣＳ，ｋ＾（２）ＣＳ〉ｋ＾（３）ＣＳ〉ｋ＾（４）ＣＳ〉ｋ＾（５）ｃｓ。其△Ｇ＾     

阳极溶出催化伏安法的理论研究 Ⅱ.不可逆电极溶出

本文对在玻璃碳电极上不可逆溶出催化的理论进行了研究,推导了溶出催化过程的电流方程,峰电流和峰电势方程,并用微计算机模拟出各种关系曲线,从理论方程得知溶出催化伏安法所得的峰电流比溶出伏安法的峰电流提高了二个数量级。本文还用钯的溶出催化实验验证理论方程,所得的实验结果均与理论方程相吻合。