Organic functionalization of the sidewalls of carbon nanotubes by diels-alder reactions: a theoretical prediction

[structure: see text] The viability of the Diels-Alder (DA) cycloaddition of conjugated dienes onto the sidewalls of single-wall carbon nanotubes is assessed by means of a two-layered ONIOM(B3LYP/6-31G:AM1) approach. Whereas the DA reaction of 1,3-butadiene on the sidewall of an armchair (5,5) nanotube is found to be unfavorable, the cycloaddition of quinodimethane is predicted to be viable due to the aromaticity stabilization at the corresponding transition states and products.     

Effects of simultaneously doped and deposited Ag on the photocatalytic activity and surface states of TiO2

Ag-TiO2 catalysts with different Ag contents were prepared via a sol-gel method in the absence of light. Based on the characterizations of XRD, photoluminescence (PL), surface photovoltage spectroscopy (SPS), field-induced surface photovoltage spectroscopy (FISPS), and XPS as well as the evaluation of the photocatalytic activity for degrading rhodamine B(RhB) solutions, it was found that the Ag dopant promoted the phase transformation as well as had an inhibition effect on the growth of anatase crystallite. The PL and SPS intensities were decreased with increasing Ag content, indicating that the Ag dopant could effectively inhibit the recombination of the photoinduced electrons and holes. However, the active sites capturing the photoinduced electrons reduced, while the Ag content exceeded 5 mol %. At rather low Ag dopant concentrations, the migration and diffusion of Ag+ ions were predominant, while at rather high Ag dopant concentrations, the migration, diffusion, and reduction of Ag ions simultaneously occurred. The Ag-TiO2 photocatalysts with appropriate content of Ag (Ag species concentration is from about 3 to 5 mol %) possessed abundant electron traps so as to be favorable for the separation of the photoinduced electron-hole pairs, which could greatly enhance the activity of the photocatalysts. From the results of FISPS measurements, it could be found that the impurity bands and abundant surface states were introduced into the interfacial layer of TiO2 because of Ag simultaneously doping and depositing, which could improve the absorption capability for visible light of the photocatalysts.     

Polyoxometalate Derivatives with Multiple Organic Groups. 3. Synthesis and Structure of Bis(phenyltin) Bis(decatungstosilicate), [(PhSnOH(2))(2)(gamma-SiW(10)O(36))(2)](10)(-)

A new phenyltin tungstosilicate derivative, [(PhSnOH(2))(2)(gamma-SiW(10)O(36))(2)](10)(-) (1), has been prepared by reaction of phenyltin trichloride with K(8)[gamma-SiW(10)O(36)].xH(2)O. The new heteropolyanion was characterized by elemental analysis, infrared spectroscopy, multinuclear NMR, and X-ray crystallography. The crystals of Cs(9)H[(PhSnOH(2))(2)(gamma-SiW(10)O(36))(2)].16H(2)O (Cs salt of 1) are triclinic, space group P&onemacr;, with lattice constants a = 12.401(3) ?, b = 13.832(3) ?, c = 16.313(3) ?, alpha = 96.17(2) degrees, beta = 109.73(2) degrees, gamma = 97.13(2) degrees, V = 2579.9(10) ?, and Z = 1. Anion 1 has a structure of virtual C(2)(h)() symmetry with two phenyltin groups sandwiched between two gamma-SiW(10) groups. Such a structure is different from all previously reported polytungstates derived from [gamma-SiW(10)O(36)](8)(-) lacunary anions.     

金属组学在急性心肌梗死早期诊断的应用

为探讨急性心肌梗死(AMI)患者血清中K⁺、Na⁺、Ca²⁺、Fe²⁺、Mg²⁺含量变化,并研究其与心肌梗死患者之间的关系。选取2022年5月至2023年2月收治的AMI患者37例,同时选取健康体检者35例作为对照组。依据入院时或体检时收集的抽血样本进行临床生化分析,比较两组间血清K⁺、Na⁺、Ca²⁺、Fe²⁺、Mg²⁺含量,采用判别方程、主成分分析法(PCA),判断分析哪种金属离子对于心肌梗死的诊断价值大。结果表明,AMI患者的血清中Ca²⁺和Fe²⁺含量低于健康对照组,差异具有统计学意义。基于血钙、铁水平两组具有显著性差异,以它们为基础进行判别分析,获得判别函数式。将血清中K⁺、Na⁺、Ca²⁺、Fe²⁺、Mg²⁺     

水中硝酸盐氮稳定同位素比值测定前处理方法的优化

水体中过量的硝酸盐导致会严重的水生生态恶化和环境污染问题。氮稳定同位素技术为水体污染来源的判断及水生系统氮素转化机理研究提供了强有力的工具。在前人基础上,通过开发Cu2+-Cd复合催化结合超声波辅助加速反应,优化硝酸盐氮同位素比值测定前处理方法。考察了Cu2+添加量,超声功率以及反应时间变化对NO3--N转化生成N2O气体及其氮同位素比值的影响,在单因素实验基础上采用正交实验优化得到了最佳反应条件,并采用不同15N同位素比值的KNO3标准溶液结合气体预浓缩装置与稳定同位素质谱仪联用系统对新方法进行了验证。新方法单次反应体系中氮最低量为1.0 μg,其中自然丰度和高丰度样品δ15N分析精度小于1‰,富集样品的15N分析精度可达0.1 atom%以内(CV<1%);且所有标准样品的15N测定值与参考值基本一致。将优化后的方法应用于不同来源水样中硝酸盐氮稳定同位素比值测定,均可获得较好的精度,较原方法提高了前处理效率,且精度更优。综上,建立的方法准确可靠,操作简单,耗时短,适用于水中硝酸盐氮稳定同位素比值测定的批量、快速前处理。     

全自动高温水解-离子色谱法测定氧化镧铈中氟、氯

为探究稀土氧化物中氟(F)和氯(Cl)元素含量的快速检测方法,通过全自动高温水解仪对氧化镧铈样品进行前处理,并利用氢氧根体系离子色谱仪检测吸收液中F-、Cl-离子的含量,建立了基于全自动高温水解-离子色谱法测定氧化镧铈中的F、Cl元素含量的快速检测方法,该方法有效避免了传统前处理方法过程复杂、分析时间慢、极易受人为干扰的问题。称取0.3g氧化镧铈样品,在氧气流量为300 mL/min,1100 ℃高温下水解燃烧20 min,吸收定容为体积20mL的吸收液,以NAOH(15mmol/L)作为淋洗液,经色谱柱分离,测得F-与Cl-在质量浓度为1.00 mg/L-15.00 mg/L范围内,质量浓度与离子色谱峰面积呈线性关系,相关系数均为0.9999。检出限分别为0.003mg/L和0.12mg/L。全自动高温水解仪联用离子色谱仪检测系统对氧化镧铈中F-的平均加标回收率测定结果为98.4%,标准偏差RSD为0.94%;对Cl-的加标回收率测定结果为97.8%,RSD为2.86%。说明该方法较高准确度及精密度,测试结果准确可靠满足企业和检测机构的测试需求,为稀土氧化中氟、氯元素含量的研究及相关产品的开发提供了理论基础。     

悬浮液进样-火焰原子吸收光谱法测定怀山药中铜

怀山药、怀地黄、怀牛膝、怀菊花合称"四大怀药",是享誉海内外的名贵中药材,其中怀山药作为药食同源的滋补佳品,近年来被作为食品原料和成品在市场广泛流通.作为食品,其中金属元素铜是必测项目.食品中铜的测定,普遍采用原子吸收光谱法,样品的预处理有干法(灰化)、湿法(加酸消化)及微波消化法,前两种方法消化时间长、操作环节多,被测元素丢失或被污染的机会多;后种方法溶样不完全,重现性易受影响.     

Non-covalent reconfigurable microgel colloidosomes with a well-defined bilayer shell

Microgels are extremely interfacially active and are widely used to stabilize emulsions. However, they are commonly used to stabilize oil-in-water emulsions due to their intrinsic hydrophilicity and initially dispersed in water. In addition, there have been no attempts to control microgel structural layers that are formed at the interface and as a result it limits applications of microgel in advanced materials. Here, we show that by introducing octanol into poly(N-isopropylacrylamide-co-methacrylic acid) (PNIPAM-co-MAA) microgels, octanol-swollen microgels can rapidly diffuse from the initially dispersed oil phase onto the water droplet surface. This facilitates the formation of microgel-laden interfacial layers with strong elastic responses and also generates stable inverse water-in-oil Pickering emulsions. These emulsions can be used as templates to produce microgel colloidosomes, herein termed ‘microgelsomes’, with shells that can be fine-tuned from a particle monolayer to a well-defined bilayer. The microgelsomes can then be used to encapsulate and/or anchor nanoparticles, proteins, vitamin C, bio-based nanocrystals or enzymes. Moreover, the programmed release of these substances can be achieved by using ethanol as a trigger to mediate shell permeability. Thus, these reconfigurable microgelsomes with a microgel-bilayer shell can respond to external stimuli and demonstrate tailored properties, which offers novel insights into microgels and promise wider application of Pickering emulsions stabilized by soft colloids.

Inverse W/O Pickering emulsions and reconfigurable microgelsomes with a well-defined bilayer structure are prepared from octanol-swollen PNIPAM-co-MAA microgels and the combination of binary microgels, which promise wider application of soft colloids.     

Towards the rational design of Pt-based alloy catalysts for the low-temperature water-gas shift reaction: from extended surfaces to single atom alloys

The rational design of Pt-based catalysts for the low-temperature water-gas-shift (LT-WGS) reaction is an active research field because of its important role played in the fuel cell-based hydrogen economy, especially in mobile applications. Previous theoretical analyses have suggested that Pt alloys, leading to a weaker CO binding affinity than the Pt metal, could help alleviate CO poisoning and thus should be promising catalysts of the LT-WGS reaction. However, experimental research along this line was rather ineffective in the past decade. In the present work, we employed the state-of-the-art kinetic Monte Carlo (KMC) simulations to examine the influences of the electronic effect by introducing sub-surface alloys and/or core–shell structures, and the synergetic effect by introducing single atom alloys on the catalytic performance of Pt-alloy catalysts. Our KMC simulations have highlighted the importance of the OH binding affinity on the catalyst surfaces to reduce the barrier of water dissociation as the rate determining step, instead of the CO binding affinity as has been emphasized before in conventional mean-field kinetic models. Along this new direction of catalyst design, we found that Pt–Ru synergetic effects can significantly increase the activity of the Pt metal, leading to Ru_1–3@Pt alloys with a tetrahedron site of one surface-three subsurface Ru atoms on the Pt host, showing a turnover frequency of about five orders of magnitude higher than the Pt metal.

KMC simulations show that decreasing the barrier of H₂O decomposition is more beneficial than decreasing the CO binding affinity in LT-WGS, while the latter was overemphasized by MF-MKM. Here Ru_1–3@Pt alloy is proposed as a promising catalyst.     

Picture Fuzzy Threshold Graphs with Application in Medicine Replenishment

In this study, a novel concept of picture fuzzy threshold graph (PFTG) is introduced. It has been shown that PFTGs are free from alternating 4-cycle and it can be constructed by repeatedly adding a dominating or an isolated node. Several properties about PFTGs are discussed and obtained the results that every picture fuzzy graph (PFG) is equivalent to a PFTG under certain conditions. Also, the underlying crisp graph (UCG) of PFTG is a split graph (SG), and conversely, a given SG can be applied to constitute a PFTG. A PFTG can be decomposed in a unique way and it generates three distinct fuzzy threshold graphs (FTGs). Furthermore, two important parameters i.e., picture fuzzy (PF) threshold dimension (TD) and PF partition number (PN) of PFGs are defined. Several properties on TD and PN have also been discussed. Lastly, an application of these developed results are presented in controlling medicine resources.