实验室安全环保意识的调查与分析——以中山大学化学类专业学生为例

A survey about students' laboratory safety and environmental protection consciousness was performed in the freshmen majored in chemistry at Sun Yat-Sen University. Results showed that laboratory safety and environmental protection consciousness of most students' are weak. After analyzing the reasons, we put forward some suggestions. Cultivating students' laboratory safety and environmental protection consciousness should be carried out from several aspects such as emphasizing and regulating from school level, training in laboratory teaching, maintaining good cultural atmosphere of laboratory, as well as providing perfect laboratory safety and environmental protection facilities. We should guide students to actively learn knowledge and skills of laboratory safety and environmental protection in order to develop their good behavior and raise their consciousness.     

Cobalt Determination by Means of Flow Injection On-line Sorbent Preconcentration-Flame Atomic Absorption Spectrometry with 1-Nitroso-2-naphthol as a Complexing Reagent

The suitability of 1-nitroso-2-naphthol(NN) as a complexing agent for on-line preconcentration of cobalt eluted on the C_(18) microcolumn by means of the FI-FAAS system was tested. Various parameters affecting the complex formation and its elution were optimized. A 2.3×10~(-3) mol/L reagent solution and the aqueous sample solution acidified with 0.1％ (volume fraction) nitric acid were on-line mixed (6.4 mL/min) on a reaction coil set at (65±1)℃ and flowed through the microcolumn for 30 s. The pH of the mixed solution was adjusted to 3—4 with HNO_3(1 mol/L) or NaOH(1 mol/L). The adsorbed complexes in the microcolumn were eluted into the nebulizer of FAAS in 10 s with ethanol acidified with 1％ HNO_3(3.0 mL/min). A good precision(1.6％ for 100μg/L Co(Ⅱ), n=10), a high enrichment factor 17.2, with detection limit (3σ) 3.2μg/L, and sample throughput (90 h~(-1)) were obtained. The method was applied to the certified reference materials(CRMs), NBS-362 and NBS-364, for the determination of cobalt and the results were in good agreement with the certified values.     

MOLECULAR IMPRINTED POLYMERS——Novel Polymer Adsorbents

1. INTRODUCTIONMolecular imprinted polymers (MIPs) have attracted wide attention for its molecular recognition properties. More and more publications involved in the area of adsorption and separation with MIPs. As early as in 1931, Poljacov [1] found that the pore structure of silica gel was influenced by the size and shape of the molecules in the gas atmosphere when he removed water from the gel under the atmosphere of benzene, toluene and xylene. The gel dried in benzene atmosphere a…     

N1923从碱性氰化液中萃取金(Ⅰ)的研究

采用放射性同位素１９８Ａｕ示踪法研究了伯胺Ｎ１９２３和ＴＢＰ从碱性氰化液中萃取金（Ⅰ）,考察了酸化率、水相ｐＨ值、萃取剂浓度等对萃取率的影响,以及ＮａＯＨ对载金有机相的反萃作用。结果表明,ＴＢＰ含量大于２０％,酸化的Ｎ１９２３与ＫＡｕ（ＣＮ）２摩尔比值在１：１时,金能够完全被萃取。载金有机相可采用０．ｌｍｏｌ·Ｌ－１的Ｎａ０Ｈ溶液定量反萃。机理研究表明,伯胺和ＴＢＰ萃取Ａｕ（ＣＮ）２－,符合ＢＣ类协同萃取机理。当金浓度大于１０ｇ·Ｌ－１时,在萃取有机相中形成纳米级的聚集体。     

ZnS∶TbF_3薄膜电致发光器件性能的研究

用射频磁控溅射和扫描电子束蒸发方法研究制备了ZnS∶TbF3薄膜的交流电致发光器件。研究了制备ZnS∶TbF3薄膜电致发光器件的几种因素对电致发光器件性能的影响 ,诸如 ,磁控溅射过程中衬底温度 ,发光层厚度 ,退火等。     

辛基三乙氧基硅烷/十八烷基三氯硅烷均相混合自组装单分子膜的表征及其形成机制

使用接触角、原子力显微镜（AFM）、静电力显微镜（EFM）和傅里叶变换红外（FTIR）光谱对辛基三乙氧基硅烷（C8TES）/十八烷基三氯硅烷（OTS）均相混合自组装单分子膜（SAM）及其形成过程中样品表面的润湿性、表面形貌、表面电势和膜内分子的有序度进行了表征,对采用分步法利用C8TES分子空间位阻制备C8TES/OTS均相混合SAM的反应机制进行了研究. 结果表明,C8TES/OTS均相混合SAM表面接触角为105°,样品表面平整、光滑;对样品表面电势进行分析后发现,混合SAM表面电势分布均匀,电势频率分布为典型的正态分布;在均相混合SAM的形成过程中,样品表面电势的分布始终十分均匀,电势频率分布均为典型的正态分布;C8TES/OTS均相混合SAM是一种具有上下两层分子排列密度不同的膜结构的单分子膜,其内部结构至少在500 nm×500 nm到20 μm×20 μm尺度上是高度均匀一致的,膜内没有明显的特征结构,具有典型的均相混合SAM特征.     

微波辅助溶剂热合成In-Si共改性TiO2的增强光催化性能

利用微波辅助溶剂热法合成了In-Si 共改性的TiO₂ 光催化剂. 粉末X 射线衍射（XRD）、激光拉曼（Raman）光谱、N₂吸脱附（BET）、X射线光电子能谱（XPS）、光致发光（PL）光谱和紫外-可见漫反射光谱（UV-VisDRS）等实验表明,尽管掺杂和改性后TiO₂结晶度略有降低,但不影响光催化剂锐钛相的形成. Si 掺杂入TiO₂晶格使颗粒变小,比表面积变大. In 不能进入TiO₂晶格,在TiO₂表面形成了In₂O₃. 罗丹明B（RhB）降解实验显示,In-Si 共改性TiO₂表现出很高的紫外和可见光催化活性,Si：In：Ti 的摩尔比为0.03：0.02：1 的样品（IST-2）光催化活性最高,紫外光下3 min 即可将RhB降解完全,可见光下120 min RhB降解率为97%,这是由材料的高表面积,In₂O₃-TiO₂复合半导体之间高效电荷转移及染料敏化等共同作用所致. 对于苯酚,光催化降解则相对缓慢,700 min内尚不能降解完全.     

Ag/C包覆对Li[Li0.2Mn0.54Ni0.13Co0.13]O2电化学性能的影响

运用共沉淀和元素化学沉积相结合的方法,制备出了具有Ag/C 包覆层的层状富锂固溶体材料Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂. 通过X 射线衍射（XRD）、场发射扫描电子显微镜（SEM）、透射电子显微镜（TEM）、恒流充放电、循环伏安（CV）,电化学阻抗谱（EIS）和X 射线能量散射谱（EDS）方法,研究了Ag/C 包覆层对Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂电化学性能的影响. 结果表明,Ag/C 包覆层的厚度约为25 nm,Ag/C 包覆在保持了固溶体材料α-NaFeO₂ 六方层状晶体结构的前提下,显著地改善了Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂ 的电化学性能. 在2.0-4.8 V（vs Li/Li⁺）的电压范围内,首次放电（0.05C）容量由242.6 mAh·g^-1提高到272.4 mAh·g^-1,库仑效率由67.6%升高到77.4%;在0.2C倍率下,30 次循环后,Ag/C 包覆的电极材料容量为222.6 mAh·g^-1,比未包覆电极材料的容量高出14.45%;包覆后的电极材料在1C下的容量仍为0.05C下的81.3%. 循环伏安及电化学交流阻抗谱研究表明,Ag/C包覆层抑制了材料在充放电过程中氧的损失,有效降低了Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂颗粒的界面膜电阻与电化学反应电阻.     

含烯烃配体的过渡金属卡宾配合物的研究II.异戊二烯二羰基[乙氧基(苯基)卡宾]铁配合物的异构化产物的合成,波谱和结构研究及四羰基[乙氧基(五氯苯基)卡宾]铁的晶体结构

异戊二烯三羰基铁(1)与芳基锂ArLi(Ar=C6H5,ρ-CH3C6H4,ρ-CH3OC6H4,ρ-CF3C6H4)在低温下反应,再用Et3OBF4烷基化,可获得组成为C5H8(CO)2FeC(OC2H5)Ar的标题化合物的异构化产物(2一5)。当用LiC6Cl5作亲核试剂,在相同条件下与1反应时,只生成已知的配合物(CO4)FeC(OC2H5)C6Cl5(6)。由单晶X射线衍射数据推断出, 2和6的分子结构都属于单斜晶系,Z=4. 2的空间群为C2h[5]-P21/n,a=8.544(2), b=14.494(5), c=12.309(4)`A,β=96.16(2)`;6的空间群为C2h[5]-P21/c, a=14.126(3), b=6.805(1), c=19.182(5)A,β=103.58(2)`. 2和6的结构用SHELXTL直接法程序解出并经块矩阵最小二乘法修正,R分别为0.066和0.043。