High-performance liquid chromatography of in vitro synthesized poly(ADP-ribose) on ion-exchange columns, separation of oligomers of varying chain length and estimation of apparent branching

Separated macromolecular fractions of in vitro synthesized poly(ADP-ribose) by liver nuclei were subjected to ion-exchange chromatography in a programmed high-performance liquid chromatographic elution system. The effects of ionic strength, pH and temperature on the separation of poly(ADP-ribose) chains were determined. Short chain oligomers (up to n = 11) were fractionated into individual components by baseline separation. Each fraction was analyzed for chain length. Trace amounts of Ado(P)Rib(P)Rib(P) found in phosphodiesterase digests were taken as indication of apparent branching. In phosphodiesterase digests of the shorter oligomers, besides traces of the above component, two other digestion products were also observed, presumably representing oligomer termini, one terminal fragment being dominant in short oligomers. Medium and long chain oligomers were partly resolved to individual components, and especially the long oligomers exhibited marked temperature dependent elution patterns. Apparent branching increased with increasing chain length up to about 3% for n = 44 and components presumably indicating termini diminished to mere traces. The adenine spectra of all fractions identified individual components.     

WATER-BLOWN POLYURETHANE RIGID FOAMS MODIFIED BY CHEMICAL PLASTICATION

1. INTRODUCTIONThese years, HCFC-141b may be the most used blowing agent for its useful properties. But, because of its high global warming effect leading to the destruction of the ozone layer, production of HCFC141b has been forbidden. However, there are…     

O-烷基-O-(2′-甲酰缩氨基硫脲苯基)-N-烷基硫代磷酰胺的合成(一)

本文报道了O-烷基-O-(2′-甲酰缩氨基硫脲苯基)-N-烷基硫代磷酰胺类化合物的合成方法,化合物3c和3e具有良好的除草活性。     

ELECTRON PARAMAGNETIC RESONANCE STUDIES OF SINGLE CRYSTAL SODIUM HEXAMOLYBDOCHROMATE (Ⅲ)Cr~(3+)/Na_3(AlMo_6O_(24)H_6)·8H_2O

An X-band EPR study on a Na_3(CrMo_6O_(24)H_6)·8H_2O single crystal diluted by its isomor-phic compound Na_3(AlMo_6O_(24)H_6)·8H_2O at room temperature is reported. Using the least squares-fitting method to simulate the EPR data for principal planes, the Hamiltonian parameterswere obtained. The principal values of the g tensors are g_(ZZ) = 1.904, g_(XX)= 1.973, g_(YY)=1.933. The zero field splitting tensor parameters are D = 0.275 cm~(-1), E = 0.05 cm~(-1). The fielddependence of Cr~(3+) energy levels with field at different angles from the principal axes whenthe field is along the principal planes is calculated based on these experimental parameters.The isofrequency plots of calculated field vs. angle are also shown. They agree well with theexperimental results.     

两种计算吸光光度法同时测定钙镁

研究了在pH10．5的硼砂-氢氧化钾缓冲溶液和乙醇的增敏作用条件下，偶氮氯膦Ⅰ与钙、镁的吸收特性，建立了多波长光度法同时测定钙和镁的方法。采用两种矩阵算法对试验数据进行处理，并对结果进行比较和分析。钙和镁含量在0～25μg／25ml范围内用计算法Ⅱ能得到准确结果。     

丝网印刷普鲁士蓝修饰电极催化还原测定过氧化氢

制备了普鲁士蓝修饰的丝网印刷过氧化氢传感器,研究了过氧化氢在该修饰电极上的电催化还原特性,考察了有关修饰膜制备和试验条件对传感器性能的影响。结果表明,pH4.0的0.2mol·L-1KH2PO4 K2HPO4缓冲溶液(PBS)中,修饰电极对过氧化氢显示出快速的电化学响应,较高的稳定性、重现性和催化活性,测定的线性范围为1.0×10-5～1.0×10-3mol·L-1,相关系数为0.999,检出限为6.0×10-6mol·L-1(3σ)。电极制作方法简便,可用于实际样品的测定。     

Study of the Fluorescence System of Europium–Enoxacin and its Applications

 This paper is the study of the fluorescence enhancement of Eu³⁺-1-ethyl-6-fluoro-4-oxo-7-(1-piperazinyl)-1,8-naphthyridin-3-carbonic acid (enoxacin, EFLX) system by surfactants. It was found that sodium dodecylbenzenesulfonate (SDBS) exhibits great enhancement on the fluorescence of the Eu-EFLX system. The molar ratio is 1:2:1 for Eu:EFLX: SDBS. Under the optimum conditions, the fluorescence intensity is a linear function of europium in the range of 1.0 × 10⁻⁸ ∼ 5.0 × 10⁻⁶ mol/L, the detection limit is 1.0 × 10⁻⁹ mol/L. The application of the Eu-EFLX-SDBS system for the determination of trace europium in rare earth samples gave satisfactory results. Received October 19, 2000. Revision August 10, 2001.     

~(14)N ENDOR Study on Bis(2-Hydroxylphenyl Ketoxime)-~(63)Cu(Ⅱ) Complex

The ENDOR spectrum of ~(14)N-~(63)Cu-HAP complex in DMSO/EtOH (5:1) freezing solution at 20 K has been studied using orientational selective method in this paper. The anisotropic superhyperfine coupling tensor and qusdrupole coupling tensor of ligand ~(14)N nucleus, and the superhyperfine coupling tensor of various ~1H nuclei have been measured precisely. Comparing the superhyperfine coupling tensor of ~(14)N-nucleus with previous work shows that the analytical method of spectrum is reasonable and the data are reliable in our previous work.     

Uniform Rice-like CdS Particles Prepared from Water-in-oil Microemulsions

IntroductionNano-sized semiconductors are of great interestdue to their special optical and electronic proper-ties[1,2].As one of the mostimportantⅡ—Ⅵsemicon-ductors,CdS has importantapplications in many fields,such as the solar cell field,non linear o…     

Advanced Current Collectors for Alkali Metal Anodes

High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.