可聚合表面活性剂的研究进展

在乳液聚合中，表面活性剂发挥着非常关键的作用，但同时它们也存在不足的方面，一个比较有前景的方法就是使用可聚合表面活性剂。可聚合表面活性剂以牢固的共价键键合到聚合物粒子上，有效避免了表面活性剂的解析及其在膜中的迁移。本文综述了近年来可聚合表面活性剂的进展，主要讨论了阴离子、非离子、阳离子可聚合表面活性剂的特征和性质及其在乳液聚合中的应用。     

Co—Mo／MgO—Al2O3水煤气耐硫变换催化剂失活的研究

利用Ｘ－射线衍射，扫描电镜，拉曼光谱，等离子发射光谱和比表面测定等方法研究了不同状态下失活及新鲜催化剂的结构，杂种类及含量。结果表明，超温使催化剂晶化明显，制备方法对催化剂结构有直接影响，再生使其强度降低，条形催化剂比较容易粉化，无机杂质是次要的失活原因。     

On-line Separation and Detection of Peptides by Capillary Electrophoresis / Electrospray FT-ICR-MS

Recently, capillary electrophoresis/electrospray ionization mass spectrometry (CE/ESI- MS) has been rapidly developed as a powerful analytical tool for charged species ranged from small molecules such as carboxylic acids1, phenolic compounds2, metal species3, tetramines4, herbicides5, drugs and drug metabolites6 to peptides and proteins7, 8. The ESI mode has proven to be sensitive, versatile and relatively easy to use in combination with CE. CE confers rapid analysis and efficient separ…     

高效液相色谱法测定大鼠血浆中的原儿茶酸

建立了大鼠血浆中原儿茶酸含量测定的高效液相色谱方法。采用的色谱柱为DiamondsilTM C18 柱(150 mm×4.6 mm,5 μm);流动相为乙腈-水(体积比为9∶91,用H3PO4 调pH至2.5);流速1.2 mL/min;检测波长260 nm;内标为对羟基苯甲酸。原儿茶酸的线性范围为0.050~3.20 mg/L,线性相关系数为0.9978，最低定量限为0.050 mg/L,日内和日间测定的精密度（以相对标准偏差表示）均低于7.0%,准确度（以相对误差表示）为-1.4%～2.6%；在0.050,0.40,3.20 mg/L低、中、高3个添加浓度水平下，血浆样品的提取回收率分别为83.4%,87.3%,91.1%。该方法简便,灵敏,准确,适用于大鼠体内原儿茶酸的药物动力学研究。     

新型反相微乳液制备纳米结构甲烷催化燃烧催化剂La0.95Ba0.05MnAl11O19-α的研究

提出一种由水, 异丙醇, 正丁醇组成的新型微乳液, 并以其为反应介质制备了甲烷高温燃烧La_0.95Ba_0.05MnAl₁₁O_19-a催化剂. 采用¹H NMR, FT-IR, 电导法及激光粒度散射法研究了新型微乳液中水的结构及相特性. 新型微乳液中水的体积分数小于一定值时, 电导率与水含量成非线性关系, k～φ曲线上存在一临界值(φ^P＝0.15). 水质子的化学位移随水含量的降低移向高场. 加入4% D₂O测定的O—D键的伸缩振动随水含量增加而向高波数方向移动. 异丙醇铝在新型微乳液中水解形成的Al(OH)₃ 胶体粒子的粒径范围为226～329 nm. 采用新型微乳液作为反应介质制备的Ba_0.05La_0.95MnAl₁₁O_19-α催化剂的粒径在30 nm, 明显小于纯水制备的样品(100 nm). BET 比表面积为65 m²/g, 比纯水制备样品高出约一倍. XRD结果显示, 1200 ℃焙烧10 h即可获得含单一β-Al₂O₃相的催化剂. Ba_0.05La_0.95MnAl₁₁O_19-α催化剂甲烷催化燃烧的T₁₀为420 ℃, 比纯水制备样品下降了90 ℃. 甲烷催化燃烧活性提高是由于含有较多Mnⁿ+纳米结构六铝酸盐的形成.     

Λ-、△-[Rh（bpy）2chrysi]^3＋对含C：T错配的DNA序列识别作用的分子模拟研究

通过分子模拟方法研究了手性金属配合物[Rh（bpy）2Chrysi]^3＋（bpy=2，2’-bipyridineChrysi=5，6-chrysenequinonediimine）对包含C：T错配碱基对的B-DNA序列的识别作用．结合类似的针对含G：A错配的和正常的B-DNA序列的识别作用研究，发现配合物I-Rh（bpy）zChrysi]^3＋可以对错配B-DNA序列进行序列特异性的识别．能量对比计算结果表明，该经典插入识别作用倾向于在错配碱基对附近进行，其中△-[Rh（bpy）2chrysi]^3＋比其手性异构体更占优势．这同Barton教授工作组的实验结果是一致的．另外插入作用倾向于在错配序列中的正常双碱基对C3A4／G3T4（错配碱基对附近）中从小沟进行．与该配合物对含G：A错配的和正常的B-DNA序列的识别作用不同的是，对包含C：T错配碱基对的B-DNA序列的识别作用倾向于从小沟进行．这一点可能源于C：T碱基对结构的不同．     

Disulfide bond cleavage induced by a platinum(II) methionine complex

The cleavage of a disulfide bond and the redox equilibrium of thiol/disulfide are strongly related to the levels of glutathione (GSH)/oxidized glutathione (GSSG) or mixed disulfides in vivo. In this work, the cleavage of a disulfide bond in GSSG induced by a platinum(II) complex [Pt(Met)Cl2] (where Met = methionine) was studied and the cleavage fragments or their platinated adducts were identified by means of electrospray mass spectrometry, high-performance liquid chromatography, and ultraviolet techniques. The second-order rate constant for the reaction between [Pt(Met)Cl2] and GSSG was determined to be 0.4 M(-1) s(-1) at 310 K and pH 7.4, which is 100- and 12-fold faster than those of cisplatin and its monoaqua species, respectively. Different complexes were formed in the reaction of [Pt(Met)Cl2] with GSSG, mainly mono- and dinuclear platinum complexes with the cleavage fragments of GSSG. This study demonstrated that [Pt(Met)Cl2] can promote the cleavage of disulfide bonds. The mechanistic insight obtained from this study may provide a deeper understanding on the potential involvement of platinum complexes in the intracellular GSH/GSSG systems.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Differentiation of Resina Draconis from Sanguis Draconis by CE

A simple, accurate method based on capillary electrophoresis with electrochemical detection (CE–ED) has been developed to determine loureirin A, loureirin B and dracorhodin for differentiation of Resina Draconis from Sanguis Draconis. The effects of some important factors such as acidity and concentration of running buffer, separation voltage, injection time, and applied potential on the CE–ED working electrode were investigated. Under the optimum conditions, the three analytes could be well separated within 30 min in a 75 cm capillary at a separation voltage of 14 kV in a 80 mmol L^?1 borate buffer (pH 9.24). The working electrode was a 300-μm-diameter carbon disc electrode positioned opposite the outlet of the capillary in a wall-jet configuration and was set at a potential of 0.90 V (vs. SCE). Excellent linearity was established over two orders of magnitude with detection limits (S/N = 3) ranging from 3 × 10^?7 g mL^?1 to 1 × 10^?6 g mL^?1 for all three analytes. The relative standard deviations of peak current and migration times of loureirin A, loureirin B and dracorhodin were 2.1, 1.7, 4.4 and 2.9, 2.8, 3.3% (n = 5), respectively. The recoveries of three constituents ranged from 98.8 to 101.8%. The methodology has been successfully applied to analyze and differentiate the actual samples with satisfactory assay results.     

含非交换氘的四唑-锌配合物

The solvothermal reaction (D₂O) of 2,6-dideuterium-4-cyanopyridine with ZnCl₂ in the presence of NaN₃ offers a novel complex Zn(OD)(C₆H₂D₂N₄) (1) in which Zn has a distorted tetrahedron composed of two N atoms from one tetrazoyl group and pyridyl group and two O atoms from two deuteratohydroxy OD groups. Crystal data for 1: Pbcn, a=1.456 8(5) nm, b=0.659 2(2) nm, c=1.645 3(5) nm, α=90°, β=90°, γ=90°, V=1.580 0(9) nm³, Z=8, M=231.54, D_c=2.236 Mg·m^-3, μ=3.070 mm^-1, R₁=0.043 4, wR₂=0.120 6, S=1.029. CCDC: 660629.