2，6－双（1′－苯基－3′－甲基－5′－氧代－4′－甲酰吡唑）吡啶稀土配合物的合成与表征

在乙醇－水溶液中合成了１４种２，６－双（１′－苯基－３′－甲基－５＇－氧代－４＇－甲酰吡唑）吡啶稀土配合物。元素分析确定其化学组成为ＲＥ＿２Ｌ＿３·ｎＨ＿２Ｏ，并用紫外可见光谱、红外光谱、核磁共振谱、热分析、荧光光谱、摩尔电导等进行了表征。     

Single Atom Alloy Preparation and Applications in Heterogeneous Catalysis

There have been remarkable progresses in manipulating heterogeneous catalysts' nanostructures in the past decade. The concept of single atom alloy (SAA) was firstly proposed in 2012 when researchers successfully stabilized single Pd atoms on the Cu(111) surface. However, earlier work in 2009, which focused on replacing one Au atom with a Pd atom in thiolate protected Au₂₅ nanoclusters, could also be considered as the pioneer work of single atom alloy. Both kinds of single atom alloys exhibited the potential of maximum utilization of scarce elements and attractive catalytic performances. The well‐defined structures of SAA catalysts make accurate modeling possible, which further realizes the rational design of single atom alloy catalysts. In this review, we summarize the research trajectory of single atom alloys as well as recent achievements in this field. We also introduce several commonly adopted characterization methods for SAA catalysts such as scanning tunneling microscopy (STM), temperature programmed reaction (TPR), extended X‐ray absorption fine structure (EXAFS) spectra, matrix assisted laser desorption/ionization mass spectrum (MALDI‐MS) and differential pulse voltammetry (DPV). Through discussing recent progresses in SAA catalysts, we propose that future researches in this filed should be focused on exploring new kinds of metal nanocrystals and controlling the nanostructure of SAA even more precisely.     

含胆甾基、西佛碱的3,6-双取代哒嗪的合成和介晶性

合成了8个未见报道的中心桥连基为酯基、CH＝N基, 含有哒嗪环、胆甾基、二个苯环、不同末端链长度的双取代哒嗪化合物, 并通过示差扫描量热法(DSC)对其介晶性进行了表征. 研究表明, 末端链长度对相变温度和清亮点温度均有影响, 但对相变温度范围影响较小.     

Surface chemistry studies of (CdSe)ZnS quantum dots at the air-water interface

Trioctylphosphine oxide- (TOPO-) capped (CdSe)ZnS quantum dots (QDs) were prepared through a stepwise synthesis. The surface chemistry behavior of the QDs at the air-water interface was carefully examined by various physical measurements. The surface pressure-area isotherm of the Langmuir film of the QDs gave an average diameter of 4.4 nm, which matched very well with the value determined by transmission electron microscopy (TEM) measurements if the thickness of the TOPO cap was counted. The stability of the Langmuir film of the QDs was tested by two different methods, compression/decompression cycling and kinetic measurements, both of which indicated that TOPO-capped (CdSe)ZnS QDs can form stable Langmuir films at the air-water interface. Epifluorescence microscopy revealed the two-dimensional aggregation of the QDs in Langmuir films during the early stage of the compression process. However, at high surface pressures, the Langmuir film of QDs was more homogeneous and was capable of being deposited on a hydrophobic quartz slide by the Langmuir-Blodgett (LB) film technique. Photoluminescence (PL) spectroscopy was utilized to characterize the LB films. The PL intensity of the LB film of QDs at the first emission maximum was found to increase linearly with increasing number of layers deposited onto the hydrophobic quartz slide, which implied a homogeneous deposition of the Langmuir film of QDs at surface pressures greater than 20 mN.m(-1).     

头发锌含量测定的应用价值评价

以114例2－5岁儿童为对象，同时取其末梢血和头发，测定锌含量。以全血锌值为标准，评价头锌测定的应用价值。结果显示，头发锌测定的灵敏度可达86．1％，特异度为52．4％，符合率为73．7％。     

The Intelligent Properties of Micro－reactors for Preparating Nanoparticles

TiO2 nanoparticles were synthesized by using micro-reactors. The shape and size of the nanoparticles produced from the original micro-reactors and the five times recycled micro-reactorsmother liquor were investigated on transmission electron microscopy (TEM) by using the original sample, freeze prepared sample, and dyeing treated sample, respectively. UV-VIS spectrometry was used to study the growth process of TiO2 nanoparticles in main reactors. The results showed that micro-reactors with nanometer magnitude had spherical or oval structures, and could restore to their original structure after they were destroyed. The products prepared in the original micro-reactors were similar to that in the micro-reactors recycled for many times, suggesting that the micro-reactors had memory function.     

生物质在流化床中的空气-水蒸气气化研究

以流化床为反应器，对生物质的空气-水蒸气气化特性进行了研究。考察了一些主要参变量，如温度 (700 ℃～900 ℃)、水蒸气/生物质比(0～4.04)、空气当量比(0.19～0.27)以及生物质粒度(0.2 mm～0.9 mm)等对气化结果的影响。在实验研究的条件范围内，生物质产气率在1.43 m3/kg～2.57 m3/kg范围内变化，产气的低热值在6 741 kJ/m3～9 143 kJ/m3范围内变化。实验结果表明：较高的气化温度有利于氢的产生；但气化温度过高会使气体热值下降；与常规的空气气化相比，水蒸气的加入使生物质气化产气率显著提高，但水蒸气加入量过多使气化温度下降，产气率和产气热值降低；生物质颗粒粒度的大小对产气组分的分布和产气率均有影响，较小颗粒的生物质会产生较多的CH4、CO和较少的CO2。     

LaNi4.7Al0.3单颗粒微电极电化学行为的研究

报道了一种单颗粒微电极制备新方法, 并研究了LaNi4.7Al0.3球形单颗粒微电极的电化学行为.     

纳米氧化铝负载双硫腙分离富集-原子吸收法测定地质样品中的金、铂、钯的研究

金、铂、钯在地质样品中的含量甚微,国内外常采用ICP-AES,ICP-MS和ETAAS直接测定。FAAS法由于仪器便宜、操作方便,也广泛应用于预富集后的痕量贵金属的分析。目前,在测定贵金属的分析方法中,常采用固相萃取法富集分离样品,主要的固相萃取剂有:无机吸附剂,交联树脂[1],螯合树脂[     

手性二胺修饰的Ru/γ-Al2O3催化剂催化芳香酮不对称加氢

研究了用手性修饰剂(1S,2S)-(-)-1,2-二苯基乙二胺修饰的负载型钌催化剂(Ru/γ-Al2O3)催化芳香酮的不对称加氢反应,在KOH的异丙醇溶液中,10～20℃,pH2=5 MPa条件下,芳香酮及其衍生物加氢产物的ee值达79.5%～85.0%,2-乙酰基噻吩加氢产物的ee值可达86.2%.此催化剂制备简单,容易与产物分离,重复使用4次,对映选择性基本保持不变.