A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

大孔膦酸树脂吸附镧的研究

本文测定了大孔膦酸树脂对La3 的吸附容量，介质pH、温度、吸附时间等因素对吸附的影响。测得吸附速率常数K298＝7．64×10－5S－1，树脂功能基与La3 的络合比为3：1，用化学及红外光谱等方法，得到大孔磷酸树脂吸附La3 的基本参数及其机理。     

WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

[Bi2Cl10(H2-Norf)4(H2O)8](H-Norf是诺氟沙星)

CommentDuringinvestigationsonvariousmetalcomplexeswithH鄄Norf[1,2],complexationwithBiwasinvestigated.Fig.1showsthestructureofthefirstBi髥complexcontainingtheantibacterialdrugNorfloxacin○,[Bi2Cl10(H2鄄Norf)4(H2O)8].Thisisanioniccompoundcompris鄄ingfour[H2     

含胆甾基、西佛碱的3,6-双取代哒嗪的合成和介晶性

合成了8个未见报道的中心桥连基为酯基、CH＝N基, 含有哒嗪环、胆甾基、二个苯环、不同末端链长度的双取代哒嗪化合物, 并通过示差扫描量热法(DSC)对其介晶性进行了表征. 研究表明, 末端链长度对相变温度和清亮点温度均有影响, 但对相变温度范围影响较小.     

头发锌含量测定的应用价值评价

以114例2－5岁儿童为对象，同时取其末梢血和头发，测定锌含量。以全血锌值为标准，评价头锌测定的应用价值。结果显示，头发锌测定的灵敏度可达86．1％，特异度为52．4％，符合率为73．7％。     

The Intelligent Properties of Micro－reactors for Preparating Nanoparticles

TiO2 nanoparticles were synthesized by using micro-reactors. The shape and size of the nanoparticles produced from the original micro-reactors and the five times recycled micro-reactorsmother liquor were investigated on transmission electron microscopy (TEM) by using the original sample, freeze prepared sample, and dyeing treated sample, respectively. UV-VIS spectrometry was used to study the growth process of TiO2 nanoparticles in main reactors. The results showed that micro-reactors with nanometer magnitude had spherical or oval structures, and could restore to their original structure after they were destroyed. The products prepared in the original micro-reactors were similar to that in the micro-reactors recycled for many times, suggesting that the micro-reactors had memory function.     

A simple route towards tubular ZnO

Thermal treatment of Zn(NH3)(4)2+ precursor in ethanol solvent led to the formation of the tubular ZnO which exhibited strong ultraviolet photoluminescence around 385 nm at room temperature; TEM images showed the hollow tubules with approximately 450 nm in diameter and approximately 4 microns in length were built up by ZnO polycrystals.     

生物质在流化床中的空气-水蒸气气化研究

以流化床为反应器，对生物质的空气-水蒸气气化特性进行了研究。考察了一些主要参变量，如温度 (700 ℃～900 ℃)、水蒸气/生物质比(0～4.04)、空气当量比(0.19～0.27)以及生物质粒度(0.2 mm～0.9 mm)等对气化结果的影响。在实验研究的条件范围内，生物质产气率在1.43 m3/kg～2.57 m3/kg范围内变化，产气的低热值在6 741 kJ/m3～9 143 kJ/m3范围内变化。实验结果表明：较高的气化温度有利于氢的产生；但气化温度过高会使气体热值下降；与常规的空气气化相比，水蒸气的加入使生物质气化产气率显著提高，但水蒸气加入量过多使气化温度下降，产气率和产气热值降低；生物质颗粒粒度的大小对产气组分的分布和产气率均有影响，较小颗粒的生物质会产生较多的CH4、CO和较少的CO2。