Design of undercuts and dipole stabilizer rods for the CPHS RFQ accelerator

As part of the design and machining of the RFQ accelerator in the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University, the design process of the undercuts and dipole stabilizer rods is presented in this paper. In particular, the relationship between the inter-vane voltage slope and the local frequency of the undercut section is described quantitatively. With the identification of modes existing in the cavity, the specific parameters are optimized by the SUPERFISH and MAFIA codes. In addition, the water-cooling requirement of the dipole stabilizer rods is briefly discussed.     

Slow Light Effect and Multimode Lasing in a Photonic Crystal Waveguide Microlaser

The slow light effect in a photonic crystal waveguide is investigated theoretically and experimentally. Theoretical calculation indicates that there is a slow light region for the even mode, from which the resonance and lasing in a microcavity would benefit. A photonic crystal waveguide microlaser is fabricated, which is related to the group velocity of c/120.6.     

模拟纳米晶体原子分布及X射线散射理论图案

通过分子动力学方法模拟纳米晶体（1—3nm）的结构．利用模拟的结果，进行了X射线衍射及径向分布函数的模拟计算．结果表明：纳米晶体晶界呈短程有序，界面原子间距分布很宽；随着晶粒尺寸的减小，晶粒的畸变越大，原子体积常数也明显增大 关键词：     

火焰原子吸收光谱法测定固体废弃物磷石膏中微量铜和铅

利用浓硝酸和浓盐酸消解磷石膏固体样品，选择了这两种酸的最佳用最，建立一种磷石膏样品处理方法。研究了应用火焰原子吸收光谱法直接吸取含盐量高的样品溶液，测定其中CU和pb的可行性。一份样品进行7次测定，结果表明，CU和Pb的RSD分别为2．6％和2．0％，加标回收率分别为92.88％一105．04％和91．20％－103．60％。     

亚甲基蓝在胶体银表面的吸附——表面增强拉曼光谱和密度泛函理论计算

获得了不同浓度下亚甲基蓝(methylene blue,MB)溶液在银溶胶中的表面增强拉曼光谱。结果表明： 亚甲基蓝分子与银纳米粒子高浓度下物理吸附为主,低浓度下化学吸附为主;不同浓度下存在不同的吸附取向,即高浓度下为“直立”取向,低浓度为“平躺”取向。通过观察低浓度下MB在银胶中吸附时间对谱图的影响,得知低浓度下吸附取向不随时间发生变化。应用密度泛函(DFT)方法在B3LYP/6-31+G*和LANL2DZ基组水平上对亚甲基蓝阳离子(MB+)及MB+与Ag原子形成的不同构型体系进行了结构优化和频率计算。实验与理论计算结果表明,MB+有可能通过N—Ag和S—Ag与Ag原子形成两种较强的吸附构型。电荷布居分析表明,与S原子相比,芳香环上的N原子更易与Ag发生相互作用。还对实验观察到的部分谱峰及它们的振动模式作出了初步归属和讨论。     

基于Matlab的计算全息图的制作与数字再现的研究

 应用Matlab语言,结合博奇型计算全息的编码方法,利用计算机分别绘制了菲涅耳全息图和傅里叶变换全息图,实现了计算全息图的快速制作,讨论了制作计算全息图的原理、方法和步骤。利用CGH技术和数字全息技术所生成的全息图再现出原始图像,完成了全息图的数字重现,实现了整个全息记录和再现过程的计算机模拟。与传统的编程语言和绘图方法相比较,该算法在实现上更加简单和快捷,并且带有一系列提高计算全息图质量的措施,有效地消除了零级像和孪生像的影响,获得了清晰的数字再现图像。     

High Polarization Single Mode Photonic Crystal Microlaser

Generally, dipole mode is a doubly degenerate mode. Theoretical calculations have indicated that the single dipole mode of two-dimensional photonic crystal single point defect cavity shows high polarization property. We present a structure with elongated lattice, which only supports a single y-dipole mode. With this structure we can eliminate the degeneracy, control the lasing action of the cavity and demonstrate the high polarization property of the single dipole mode. In our experiment, the polarization extinction ratio of the y-dipole mode is as high as 51：1.     

关于软玻密子的结构

本文修改了Landshoff-Nachtmann的软玻密子(Pomeron P)场论模型.从强子组分夸克具有结构的观点出发,根据高能强作用软过程中的最大非微扰强作用反应假定,提出了有关软P新的结构图像.对撞强子中的一对组分夸克被分解为裸夸克和一系列非微扰胶子(和夸克对).与此相应,软P的结构是由胶子形成的一系列切割梯形图之和所代表.在系统能量s很大而动量转移|t|很小的多重雷吉(Regge)运动学区间,并在保留lns的领头阶近似下,计算了这组切割梯形图之和所对应的散射振幅和总截面.它们的表达式出现了对s的Regge型幂次因子,得出了软P轨迹的简洁表达式.简单说明了按本文提出的方案可以讨论那些相关的强作用过程.     

GISAXS and SAXS studies on the spatial structures of Co nanowire arrays

The spatial structures of magnetic Co nanowire array embedded in anodic aluminium membranes were investigated by grazing incidence small angle X-ray scattering (GISAXS) and conventional small angle X-ray scattering (SAXS) techniques. Compared with SEM observation, the GISAXS and SAXS measurements can get more overall structural information in a large-area scale. In this study, the two-dimensional GISAXS pattern was well reconstructed by using the IsGISAXS program. The results demonstrate that the hexagonal lattice formed by the Co nanowires is distorted (a ≈ 105 nm, b ≈ 95 nm). These Co nanowires are isolated into many structure domains with different orientations with a size of about 2 μm. The SAXS results have also confirmed that the nanopore structures in the AAM can be retained after depositing Co nanowires although the Co nanowires can not completely but only just fill up the nanopores. These results are helpful for understanding the global structure of the Co nanowire array.     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.