Comparison of Two Rhodamine-Polyamine Polystyrene Solid-phase Fluorescence Sensors for Hg(II) Detection Based on Theoretical Calculation

Two novel rhodamine-based polystyrene solid-phase fluorescence sensors PS-PA-I and PS-PA-II with different lengths of polyamines were synthesized for Hg(II) determination. The detection mechanism involving the Hg(II) chelation-induced spirocycle open of rhodamine was proposed with the aid of theoretical calculation. The stronger N-Hg bond and the longer polyamine chain in PS-PA-II led to a better selectivity, much higher and more quickly fluorescence response to Hg(II).     

Study on calculation method of condensation heat transfer for non-azeotropic hydrocarbon mixtures in helically coiled tubes

Journal of Thermal Analysis and Calorimetry - We investigated the release behaviors and reaction reactivities of gaseous products during CO2 gasification of three chars (Guanghui char, Hongshagang...     

Combustion behavior and thermal stability of TPU composites based on layered yttrium hydroxides and graphene oxide

Journal of Thermal Analysis and Calorimetry - Layered yttrium hydroxides (LYH)- and graphene oxide (GO)-supported layered yttrium hydroxides (GO–LYH) were synthesized by a co-precipitation...     

Skin Friction Reduction of Hypersonic Body by Supersonic Layer

Fluid Dynamics - Both numerical methods and wind tunnel tests were used to reduce skin friction for a hypersonic body. A hypersonic cone was tested under three different free-stream flow...     

Thermal decomposition behavior of naphthalene-labeled polyethylene

Pyrolysis–GC/mass spectrometry experiments reveal that naphthalene groups attached to maleated polyethylene as the 1-naphthylethyl ester are stable for relatively long periods of time at 170°C. Decomposition can be detected for samples heated for 2.0 min at 200°C, but even at that temperature, the extent of decomposition is very small. At higher temperatures, two of the decomposition products from the labeled polymer are readily understood: 1-vinylnaphthalene and 1-naphthylethanol can form by reactions that are well-precedented in the organic chemistry literature. At 200°C, only naphthalene is formed, which requires scission of the bond between the naphthyl ring and the C₁ carbon of the ethyl group. We suggest two possible pathways for this reaction. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:2045–2049, 1996     

Effects of guanidinium cations on structural,optoelectronic and photovoltaic properties of perovskites

Guanidinium (GA) cations are intentionally introduced in MAPbl3 perovskite by considering its potential capability of stabilizing the material through plenty of...     

两类简单多数原则的完全特征

易建新(2005)引入了两类多数投票的社会福利函数,本文用无关备选对象的独立性、匿名性、中立性等公理给出了它们的完全特征.     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。