动态光散射实验

动态光散射技术是测量纳米及亚微米颗粒粒径的有效方法．本文介绍了动态光散射实验的原理、实验装置及方法，并测量了粒径为85nm的聚苯乙烯水溶液的粒径，分析了实验产生误差的原因．     

催化动力学测定痕量砷(Ⅲ)

在醋酸介质中,发现痕量砷(Ⅲ)能灵敏地催化高碘酸钾氧化靛红la褪色的指示反应,研究了该催化反应的最佳条件与动力学参数,建立了一种新的测定痕量砷(Ⅲ)的方法。该法的线性范围0.0-40μg/LAs(Ⅲ),检测限为1.92×10-6g/L,用于环境水样中砷(Ⅲ)的测定,获得了满意的结果。     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Photocatalytic Synthesis of Oxygenates from Gaseous CO2 and CH4 over Semiconductor

Photoinduced synthesis of CO2 and CH4 was investigated using a batch reaction system on several photoactive materials supported on silicon dioxide. Single semiconductor showed higher selectivity to C1 compounds. The production of C2-C3 oxygenates took place preferentially on composite semiconductor photocatalysts. In particular, it was found that acetone was the primary product over Cu/CdS-TiO2/SiO2.     

强激光远场焦斑重构算法研究

 通过CCD图像采集单元结合传统的列阵相机测量高功率固体激光器的远场焦斑分布，采用图像处理技术的边缘算子提取焦斑的几何中心，提出通过几何中心对心的焦斑嵌套重构算法，解决了光斑饱和时的对心难题，实现了快捷准确测量激光焦斑，为激光器的实时控制提供参考数据。     

直接求线性规划可行基的一种方法

本文给出直接求线性规划问题基可行解的一种简易方法,该方法既避免了引入人工变量,减少存储,一般又能较快地得到一个较好的基可行解.     

Experimental 511 W Composite Nd：YAG Ceramic Laser

We demonstrate a 511 W laser diode pumped composite Nd：YAG ceramic laser. The optical pumping system is consisted of five laser diode stacked arrays arranged in a pentagonal shape around the ceramic rod whose size is φ6.35×144mm. When the pumping power is 1600 W, the cw laser output up to 511 W at 1064nm can be obtained with a linear piano-piano cavity, and the optical-to-optical efficiency is 31.9%. To our knowledge, this is the highest value of laser output by using a newly invented composite Nd：YAG ceramic rod as the gain medium.     

聚苯硫醚／石墨基双极板复合材料性能的研究

以聚苯硫醚树脂和人造石墨为原料一次模压成型制备双极板复合材料.研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响.结果表明,制备聚苯硫醚/石墨基双极板材料宜选用石墨化程度较高且结构密实的石墨粉料;采用保温后加压及空气中冷却方式制备的复合材料的综合性能较优.     

Na离子和Cl离子引起He原子直接多重电离过程的研究

利用2～8 MeV的Naq+、Clq+(q=2,3,4,5)轰击氦原子,对碰撞的直接多重电离过程进行研究.实验采用反冲离子-散射离子飞行时间符合技术,通过反冲离子飞行时间谱区分不同价态反冲离子;利用静电偏转和位置灵敏探测技术区分不同电荷态散射离子;结合CAMAC-PC多参数获取系统得到一定价态散射离子所对应的反冲离子电荷态分布谱;经分析该谱得到直接多重电离截面与直接单电离截面之比R21.讨论了R21随入射离子速度和电荷态的变化关系.