基于半像素错位的多幅图像重建高分辨率图像技术研究

介绍了一种基于半像素错位的多幅图像重建高分辨率图像技术。分析了半像素错位的多幅图像与高分辨率图像各像素灰度值的对应关系 ,并从CCD数字化采样的角度进行了论证。同时 ,结合实际摄像机CCD结构 ,求出了高分辨率图像重建的计算公式 ,并通过实验进行了验证和完善。重建的本质是以原高分辨率图像的 4邻域平均图像为基础 ,增加一定比例的边缘细节信息 ,去接近原高分辨率图像。CCD的动态范围越大 ,图像的灰度级越多 ,那么计算误差就越小 ,图像的边缘细节信息就可以利用更多 ,重建的图像就越接近原高分辨率图像。通过实验和分析表明 ,利用半像素错位的多幅低分辨率图像重建高分辨率图像的原理是正确的 ,方案是可行的     

Controlled Bidirectional Quantum Direct Communication by Using a GHZ State

A controlled bidirectional quantum secret direct communication scheme is proposed by using a Greenberger- Horne-Zeilinger （GHZ） state. In the scheme, two users can exchange their secret messages simultaneously with a set of devices under the control of a third party. The security of the scheme is analysed and confirmed.     

强激光远场焦斑重构算法研究

 通过CCD图像采集单元结合传统的列阵相机测量高功率固体激光器的远场焦斑分布，采用图像处理技术的边缘算子提取焦斑的几何中心，提出通过几何中心对心的焦斑嵌套重构算法，解决了光斑饱和时的对心难题，实现了快捷准确测量激光焦斑，为激光器的实时控制提供参考数据。     

直接求线性规划可行基的一种方法

本文给出直接求线性规划问题基可行解的一种简易方法,该方法既避免了引入人工变量,减少存储,一般又能较快地得到一个较好的基可行解.     

聚苯硫醚／石墨基双极板复合材料性能的研究

以聚苯硫醚树脂和人造石墨为原料一次模压成型制备双极板复合材料.研究了模压成型过程中加压时机、冷却方式及人造石墨原料对复合材料电导率和弯曲强度的影响.结果表明,制备聚苯硫醚/石墨基双极板材料宜选用石墨化程度较高且结构密实的石墨粉料;采用保温后加压及空气中冷却方式制备的复合材料的综合性能较优.     

损伤断裂图型演化的统计描述

本文采用动力学演化与随机跃迁并存的模型,研究损伤断裂图型的演化规律。根据演化的终态,损伤演化可分为整体稳定(GS)和演化引起剧变(EIC)两种模式,后者联系于断裂现象。本文引入统计描述,并指出,即使微损伤的连接规律是确定性的,无序介质中断裂的出现亦应以概率分布函数描写。     

Study on the Photophysical Process in N-Phenyl Phenothiazine and N-(2-Pyridine) Phenothiazine

By the measurements of the solvent and temperature effects of the fluorescence emission spectra and lifetime of N-phenyl phenothiazine (PHZ) and N-(2-pyridine) phenothiazine (PYZ),the existence of strongly twisted intramolecular charge transfer (TICT) state in PYZ emission spectra is proved.The exciplex formed by PHZ, PYZ and dimethyl terephthalate (DMTP) is investigated, and moreover, the transient absorption spectra of positive and negative ions as the results of the dissociation of the exciplex in the polar solvents is observed through the flash photolysis.     

关于具有常平均曲率和数量曲率超曲面的Mbius几何的一个注记

设x:M→Sn 1(n≥3)是n 1-维单位球中的无脐点超曲面, Mobius不变量G,Φ,A和B分别表示x的Mobius度量, Mobius形式, Blaschke形式和Mobius第二基本形式．本文证明了如果x的Mobius形式Φ平行,并且A λG μB=0,其中λ,μ分别是定义在M上的光滑函数,那么Φ=0,由此及李海中、王长平(2003年)文献中的分类定理给出了Sn 1中具有平行的Mobius形式及满足A λG μB=0的超曲面的分类．此结果推广了他们及张廷枋(2003年)文献中的结果．     

Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.