Self-Assembly of Micro-Parts onto Si Substrates at Liquid-Liquid Interface

We report a new approach for the self-assembly of cuboid micro-parts onto Si substrates to construct three-dimensional microstructures. To perform assembly, the Si substrates are prepared with a deep cavity array as binding sites. An aggregate composed of hundreds of uniformly aligned micro-parts is formed at the C10F18-H2O interface. The micro-parts are arranged by passing the substrate through the aggregate of micro-parts, thus the micro-parts are left on the substrate, and then the substrate is vibrated ultrasonically in the solution, making it possible for the micro-parts to fall into the cavities on the substrate. Finally the substrate is pulled out of the solution after assembly. This technique could give a high yield of up to 70%, providing a new method for micro-assembly.     

SD对壳模型: 偶偶Pt核低激发态性质

利用SD对壳模型讨论了偶偶Pt核低激发态的集体性质. 结果发现在该模型下, 利用一个仅含有3个参数的哈密顿量, 可以很好地再现偶偶Pt核低激发谱的集体性质.     

TDI三聚体的合成研究

以一种碱金属羧酸盐K-1000作为甲苯二异氰酸酯(TDI)三聚反应的催化剂合成了以TDI三聚体为主要成分的多异氰酸酯固化剂。对合成工艺条件进行了探讨。结果表明,将反应温度控制在35℃,催化剂K-1000用量为0.06%时,用苯甲酰氯作为阻聚剂可得到性能基本稳定的TDI三聚体产品。     

糖蛋白/胆红素钙水溶性复合物的形成及光谱研究

采用傅立叶变换红外光谱(FT-IR)，结合减法、二阶导、退卷积和曲线拟合等先进光谱技术，紫外可见光谱，ICP-AES分析方法，对不同质量比的α-酸性糖蛋白(AGP)和胆红素钙(CaBR)反应后的滤液进行了研究。结果表明，AGP和CaBR之间存在着较强的相互作用，导致AGP二级结构的有序性增加，CaBR的水溶性增大，两者形成了可溶性的AGP/CaBR复合物。     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

Influences of the Hydrophobicity of the Heme-binding Pocket on the Properties and Functions of Cytochrome b_5 Mutants

IntroductionElectrontransferreactionsarethekeystepsinphoto synthesis ,respirationandmanyotherbiochemicalprocess es.1Cytochromeb5isaredoxproteinexistingwidelyinnature ,whichactsasanelectron carrierduringvariouselectrontransferprocessesinthebiologicalsystem .2Cytochromeb5isamembraneproteinwithmolecularweightofapproximately 16kDa ,ofwhichthehydrophobicC terminaldomainanchorscytochromeb5tothemem brane ,andthehydrophilicN terminaldomaincontainshemeprostheticgroupandexhibitsthebiologicalfunctionsof…     

球形SiO2-Al2O3的制备、结构和性能

将Na2SiO3·9H2O 溶液通过强酸性阳离子树脂进行离子交换得到酸性硅溶胶,再将硅溶胶与铝溶胶及六次甲基四胺混合后采用油柱成型法制备了球形SiO2-Al2O3复合氧化物. 通过XRD、BET 及TPD等手段对样品进行测试和表征, 结果表明, 600 ℃焙烧得到的SiO2-Al2O3中SiO2以无定型形式存在, 其比表面、孔容与表面酸性随SiO2含量的增加而提高, 孔径、堆密度随SiO2含量的提高而减小, 压碎强度基本保持不变.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

盐卤硼酸盐化学(非汉字字符)——MgO·nB_2O_3-18%MgCl_2-H_2O过饱和溶液20℃结晶动力学

用结晶动力学方法对不同摩尔比的 Mg O/B2 O3在摩尔分数为 1 8% Mg Cl2 -H2 O中的过饱和溶液在2 0℃的结晶动力学过程进行了研究 .n(Mg O) /n(B2 O3) =1 /1和 1 /1 .5时分别结晶析出 2 Mg O· 2 B2 O3·Mg Cl2 · 1 4H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) .n(Mg O) /n(B2 O3) =1 /2时依次结晶析出 Mg O·3 B2 O3· 7.5 H2 O,Mg O· 2 B2 O3· 9H2 O和 2 Mg O· 3 B2 O3· 1 5 H2 O(多水硼镁石 ) 3种固相 .n(Mg O) /n(B2 O3)=1 /3时结晶析出不同结晶水的六硼酸镁 Mg O· 3 B2 O3· 7H2 O和 Mg O· 3 B2 O3· 7.5 H2 O.析出固相采用X射线粉末衍射、红外光谱和热分析进行物相鉴定 .拟合并给出结晶动力学方程 ,同时对水合镁硼酸盐的结晶反应机理进行了探讨