溶剂热还原合成Cr2O3纳米管(英)

Cr₂O₃ nanotubes with diameters of 80 nm and lengths of 550 nm were synthesized in a solvothermal reduction system at 180 ℃. The acetyl acetone (AcAc) and ethylene glycol (EG) were used as the chelate agent and the reductant respectively in the system. An intermediate compound-Cr(Ⅲ)(C₅H₇O₂)₃ was formed to force Cr₂O₃to crystallize along one direction.     

氧化铽团簇的表面修饰及对其荧光特性影响的研究

采用脉冲激光轰击浸于流动相中的氧化铽固体靶，考察了流动相及其流速、脉冲激光输出功率、修饰剂、添加修饰剂顺序等对所获得的氧化铽有机溶胶荧光性能的影响。UV-Vis和荧光光谱的测试表明：以含有修饰剂的无水乙醇作为流动相，可得到良好荧光性能的氧化铽乙醇溶胶，而环己酮与醋酸乙酯均不适合作为该体系的流动相;最佳流速为0.15 mL·s^-1；脉冲激光输出功率大有利于其荧光性能；最佳修饰剂为乙酰丙酮(acac)和2，2′-联吡啶(2，2′-bipy)，且应原位修饰。     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

麻黄中伪麻黄碱在小鼠组织中的分布研究

为了解麻黄(Herba ephedrae,简称HE)中伪麻黄碱(Pseudoephedrine,简称PE)在小鼠脑、肺、心、肝、肾的分布变化,探讨HE的归经,用GC-MS/SIM法,分析了用药后30、60、120 min PE在小鼠脏器分布量。结果表明,PE于不同时间点在小鼠脏器的分布由多到少的顺序是:30 min时,肺脏(肾脏、肝脏、脑),心脏;60 min时,肾脏,心脏(肝脏),脑,肺脏;120 min时,脑,肾脏,心脏,肝脏(肺脏)。本试验从PE在小鼠体内脏器的分布量初步反映了HE的归经趋势。     

甲基丙烯酸全氟烷基代乙酯对天然橡胶乳液辐射改性研究

天然橡胶的性能与其组成中的C C双键有密切关系,由于C C双键的存在,为天然橡胶的改性提供了便利,大多数天然橡胶的改性方法,如氯化、氢氯化、环化、环氧化、接枝共聚等皆是建立在这一思路基础上的.White等[1]认为接枝天然橡胶的目的是提高天然橡胶的机械强度,赋予特殊的功能.作     

氧化铝/碳纳米管复合材料的制备及表征

采用聚乙烯醇对碳纳米管表面进行改性，通过化学沉淀法将Al(OH)₃均匀沉积在碳纳米管表面，然后在氮气气氛下于500 ℃煅烧2 h，制备出氧化铝/碳纳米管复合材料。采用TEM、TG、DTA、XRD、IR、氮吸附脱附(比表面积及孔结构分析)等对氧化铝/碳纳米管复合材料进行表征，结果表明:未经聚乙烯醇改性的碳纳米管，氧化铝与碳纳米管相互分离;经聚乙烯醇改性的碳纳米管，氧化铝与碳纳米管结合良好。经聚乙烯醇改性的碳纳米管表面均匀覆盖一层聚乙烯醇膜，通过聚乙烯醇的吸附作用， Al(OH)₃沉积在碳纳米管表面形成一层连续的覆盖层。     

中药川白芷化学成分的研究

中药川白芷为伞形科当归属杭白芷 (Ａｎｇｅｌｉｃａｄａｈｕｒｉｃａ (Ｆｉｓｃｈ .ｅｘＨｏｆｆｍ .)Ｂｅｎｔｈ .ｅｔＨｏｏｋ .ｃｖｈａｎｇ ｂａｉｚｈｉＨｏｒｔ)的干燥根。川白芷为我国传统中药 ,主治头疼、鼻炎、癣症等疾病。现代药理实验表明白芷中所含的呋南香豆素具有平喘、降压、抗菌、解痉、光敏、活化交感系激素等多种药理作用[1] 。已有文献对白芷的化学成分进行了研究 ,发现白芷中主要含香豆素成分[2～ 4] 。四川遂宁产川白芷为道地白芷 ,其药性好 ,为进一步研究其活性成分 ,本文对遂宁产川白芷进行化学成分研究。共分离、…     

INFLUENCE OF COMPOSITIONAL HETEROGENEITY ON MORPHOLOGY AND PROPERTIES OF SEGMENTED COPOLYMERS

Polyethylene terephthalate(PET)/polycaprolactone(PCL) segmented copolymers with different hard segment contents and a blend of two of them were studied by using DSC, WAXS, TEM and IR techniques and dynamic mechanical, stress-strain and isothermal crystallization measurements. Emphasis was laid on the studies of influence of compositional heterogeneity on the morphology and properties of these segmented copolymers. It was found that the solution cast specimens of the more heterogeneous sample exhibit better segregation of segments, high crystallinity and melting temperature. They have higher thermal stability of mechanical properties at small deformations. However, they are less stable against large deformations and may become softer than the more homogeneous ones.     

Synthesis,crystal structures and electrochemical properties of group 6 metal carbonyl anion complexes

A series of [M(CO)₅I]⁻ and [M₂(CO)₁₀I]⁻ anion complexes have been synthesized by the photochemical reaction of PhCH₂N(CH₃)₃I or FcCH₂N(CH₃)₃I (Fc=ferrocenyl) with M(CO)₆ (M = Cr, Mo or W), and characterized by elemental analyses, i.r., ¹H-n.m.r. and ¹³C-n.m.r. spectra in the case of the molybdenum and tungsten complexes. These complexes exhibit considerably different electrochemical behavior, when investigated by cyclic voltammetry. The crystal structures of [PhCH₂N(CH₃)₃][Cr(CO)₅I] and [FcCH₂N(CH₃)₃][W₂(CO)₁₀I] have been determined by X-ray diffraction, indicating that only weak contacts maybe exist between anions and cations by the I...H bond in the former, and there are no direct interactions between anions and cations in the latter.     

二维网状铜(Ⅱ)配合物的合成及晶体结构表征

A Cu(Ⅱ) complex [Cu(L)_1.5(OSO₃)]·3H₂O (1) [L=1,4-bis(imidazol-1-yl)benzene] was synthesized by reaction of ligand L with CuSO₄·5H₂O using solvothermal method and its structure was determined by X-ray crystal structure analysis. The structure indicates that the complex crystallizes in triclinic, space group P1 with a=0.948 8(2), b=1.078 5(2), c=1.108 4(2) nm, α=74.820(2), β=81.331(2), γ=72.638(2)°, V=1.041 5(3) nm³, Z=2, D_calc=1.687 g·cm^-3, F(000)=544, μ=1.205 cm^-1, the final R=0.062 3 and wR=0.132 8. The Cu(Ⅱ) atom has distorted square-pyramidal environment with a N₃O₂ donor set. Each L ligand links two Cu(Ⅱ) atoms using its imidazole groups to form an infinite one-dimensional (1D) ladder-like chain, which further linked by SO₄^2- to form a two-dimensional (2D) network structure. The 2D sheets are further connected by C-H…O hydrogen bonds to give a three-dimensional (3D) structure. CCDC: 650388.