铜/金修饰电极-阴离子交换色谱-直流安培法测定阿米卡星注射液组分

建立了一种用阴离子交换色谱分离、以自制铜/金修饰电极为工作电极的直流安培电化学法(DC)直接检测硫酸阿米卡星注射液中主要组分及杂质含量的分析方法。考察了流动相浓度、测定电位等参数对色谱分离和测定的影响。在固定相为CarboPacPA10阴离子交换柱、流动相为26 mmol/L NaOH的色谱条件下,检测电位为0.64 V时,阿米卡星在0.0005~0.02 g/L(r=0.9989)和0.02~0.2 g/L(r=0.9991)两个浓度范围内呈线性。与裸Au电极在采用脉冲安培检测模式(PAD)时相比,电化学检测所需要的碱性强度低(pH<13),而且测定灵敏度高,线性范围宽。本方法不需要柱前和柱后衍生化,能同时测定硫酸阿米卡星注射液中的主要组分和杂质组分。修饰电极制作方法简单,催化稳定性好,可望被应用到流动注射、毛细管电泳等其它流动体系中,对硫酸阿米卡星原料药、注射液等实际样品中的各组分进行测定。     

荧光淬灭和加强理论公式合理性的热力学分析

通过荧光法在不同温度下研究了3种第三代头孢新药: 盐酸头孢吡肟、头孢匹胺和头孢唑肟钠与人血清白蛋白(HSA)和牛血清白蛋白(BSA)的作用, 分别应用荧光淬灭和荧光加强理论公式计算了它们的结合常数等, 进而分别计算了它们的热力学函数. 因对应于不同的理论公式得出的K_A值并不完全相同, 由此得到它们相应的热力学参数也有所不同. 本文对这些热力学数据的差异进行了分析比较, 结果表明: 基于荧光加强理论公式(4)获得的热力学数据显示更为合理. 因而我们建议, 即使在研究受体-底物的荧光淬灭反应时, 采用荧光加强理论公式(4)可以获得更符合实际的结果.     

Preparation and Properties of Electrospun Sheath-core Modified-PMMA Nanofibers with Photoluminescence and Photochromic Functions

Multi-functional nanofibers are playing an important role in the optical field, and are widely used in fluorescence indication, product anti-counterfeit identification and smart clothing. Nanofibers with photoluminescence and photochromic functions are already attracting more interest from researchers. In this work, based on electrospun technology, the modified-PMMA nanofibers[PMMA=poly(methyl methacrylate)] with photoluminescence and photochromic functions were prepared through the design of the sheath-core structure(SCNFs 1-4). Compared with other samples, SCNF-4 shows outstanding photoluminescence and photochromic functions. SCNF-4 can produce green light and its fluorescence intensity and fluorescence lifetime can reach 7144 a.u. and 1031.32 μs, respectively. In photochromic functions, SCNF-4 can show purple in 1 min under the 365 nm ultraviolet light, and the color can be preserved for more than 4 h under the sunlight. When SCNF-4 is irradiated by far infrared light, the color of the samples can fade quickly in 40 s. Under the irradiation of ultraviolet light of different wavelengths, SCNF-4 can display multi-color fluorescence and achieve a reversible transition between white and purple. The design of the sheath-core structure realizes the complementarity of photoluminescence and photochromic functions of the electrospun modified-PMMA nanofibers, which is important to promote the wide application of multi-functional nanofibers in the optical field.     

缓冲层ZnPc对有机电致发光器件特性的影响

本文研究了酞菁锌(ZnPc)薄膜的表面形貌及ZnPc薄膜作为缓冲层对有机电致发光器件(OLEDs)光电特性的影响.对比两组样品的AFM图像,ZnPc薄膜相比于ITO薄膜,其表面的岛面积较大,薄膜表面更连续平整,基本上覆盖了ITO膜表面针孔,减少了表面的缺陷.另外,ZnPc薄膜的岛分布均匀有序.使用ZnPc作为缓冲层的器件性能明显好于未使用ZnPc修饰的器件,在7.42V的驱动电压下的最大发光亮度达到1.428kcd/m2,在4.3V电压驱动下时,最大光功率效率为1.411m/W;而未使用缓冲层的器件在8V的驱动电压下达到最大发光亮度达到1.212kcd/m2,在5.5V电压驱动下时,最大光功率效率为0.931m/W.     

一种适用于磁流体力学切向间断的HLLC黎曼算子

磁场的存在使得磁流体力学特征波模不同于流体力学, 因此直接由流体力学HLLC黎曼算子导出的HLLC双中间态在交界的间断面会出现不守恒的问题。通常降级采用HLL单磁场中间态代替HLLC双磁场中间态以实现守恒和计算稳定, 代价是切向间断的模拟精度不足。本文对此进行改进, 在模拟切向间断时仍然保留原有的HLLC双磁场中间态, 同时各守恒量仍然能够满足Toro相容条件; 改进型HLLC算子在间断两侧的磁场分量存在差异, 因此能够更精确还原切向间断面。基于数值测试, 包括一维激波管和切向间断的时变模拟, 以及地球磁层三维数值模拟, 将模拟结果进行对比, 结果表明: 相比于已发展的HLLC算子, 改进型HLLC算子对切向间断具有更好的捕捉精度, 能够达到或接近耗时更多的HLLD算子的模拟精度。     

无机/有机杂化IPN的合成与表征

随着互穿聚合物网络(IPN)的发展,出现了无机/有机杂化IPN,调整两组分或多组分互穿程度控制材料的结构、形态与性能,可使材料具有较宽的适用范围.此类材料具有高模量、高韧性,易成型加工.     

顺铂耐药的分子机制

顺铂被广泛用于多种类型的实体肿瘤的临床治疗.DNA是顺铂的主要靶点,顺铂结合会导致DNA损伤并诱发细胞凋亡.然而,顺铂化疗常常受到内在的和获得性的耐药性的限制.在过去30多年里,大量的研究致力于对顺铂耐药性的理解,并且提出了几种导致顺铂耐药性的分子机制.这些机制显示顺铂的耐药性具有多因素特征.本文系统描述和讨论了顺铂的耐药性机制,包括细胞内药物积累的减少,药物去活作用的增强,DNA修复作用,DNA损伤反应和凋亡通路的变化以及一些间接信号通路的调控影响.     

基于柑橘皮渣纳米多孔碳分散固相萃取-气相色谱法 测定果蔬中14种有机磷农药残留

以废弃柑橘皮渣为碳源,通过ZnCl2活化后高温煅烧制备了纳米多孔碳材料(NPC),将其作为吸附剂,建立了分散固相萃取净化、气相色谱法测定果蔬中有机磷农药残留的方法.扫描电子显微镜(SEM)、X射线衍射(XRD)、傅立叶红外光谱(FT-IR)、拉曼光谱及氮气吸附分析(BET)等表征显示,NPC是无定形的多孔碳材料,孔径大小为0~15 nm,比表面积和孔体积分别为1243 m2/g和1.28 cm3/g.以果蔬中14种有机磷类农药为分析对象,考察了吸附剂的用量和净化时间,并将NPC与商业化材料N-丙基乙二胺(PSA)、十八烷基硅胶键合相(C18)和石墨化碳黑(GCB)进行了对比.结果表明,NPC最佳使用量为0.01 g,净化时间只需2 min.NPC成本远低于C18、PSA和GCB,因具有丰富的孔道结构,NPC净化效果显著优于3种商业化材料.在最优条件下,14种有机磷农药在0.02~1.0 mg/L范围内的线性关系良好(R2>0.99),检出限(S/N=3)为0.63~5.30μg/kg.3个添加水平下的平均回收率为71.3%~114.7%,相对标准偏差(RSD)为0.9%~12.9%.本方法操作简便、快速、成本低,在果蔬样品前处理中具有广阔的应用前景.     

冷冻法硝酸磷肥工艺中酸不溶物提纯研究

采用酸浸、磁选酸浸、水淬/研磨酸浸等不同工艺对冷冻法硝酸磷肥生产工艺中的废渣-酸不溶物进行了提纯处理,利用X射线荧光光谱仪(XRF测试)对酸不溶物提纯前后各成分含量的变化进行了分析,从中得出了不同工艺流程对酸不溶物纯度的影响,最终确定了最佳的酸不溶物处理工艺.结果表明:在酸浸实验中,盐酸酸浸效果最佳,可将酸不溶物中SiO2纯度达到82.43;;在酸浸工艺前加入磁选、水淬、研磨的工序均可有效提升酸不溶物的提纯效果;冷冻法硝酸磷肥工艺中酸不溶物最佳的提纯工艺路线为:干燥、筛分、水洗、磁选、研磨、盐酸酸浸,处理后酸不溶物中SiO2纯度达到88.92;,符合微硅粉的生产要求.     

PINNING EFFECT OF LEAD LANTHANUM TITANATE THIN FILMS DEPOSITED ON DIFFERENT SUBSTRATES

Pinning effect of lead lanthanum titanate (PLT) ferroelectric thin films with excess PbO of 20 mol% has been studied for deposition on diffe rent substrates. Silicon, sapphire and quartz were used as substrates on which P t/Ti or LaNiO₃ thin films were deposited as bottom electrodes. Electron probe analysis results showed that there was still a certain amount of excess Pb in PLT films after annealing at 550 ℃ for 1 h, and the amount of it was dependent on the substrate used. The distribution of excess Pb in the films was investig ated by Auger electron spectroscopy depth profile. It was shown that the substrates and the bottom electrodes had significant effects on the content and distrib ution of excess Pb in PLT films. The excess Pb and its accumulation at the inter face between the film and bottom electrode may act as pinning centers and have a pinning effect on domains, which can be observed by abnormal P-E hysteresis loops and abnormal C-V curves. The excess Pb content in the films and the accumulation of Pb at the interface were high in PLT films deposited on Pt/Ti/S i, and considerable pinning effect was observed. As LaNiO₃ would absorb most part of the excess Pb in PLT films, the content of excess Pb in the films deposited on LaNiO₃/Si was very low and the pinning effect was hardly observed.