Separation of polycyclic aromatic hydrocarbons by micellar electrokinetic chromatography with aqueous short-chain alcohol solvent

Micellar electrokinetic capillary chromatography (MEKC) with aqueous organic solvent has been developed to separate polycyclic aromatic hydrocarbons (PAHs). Methanol, ethanol or propanol as an organic modifier was added to sodium dodecyl sulfate (SDS) micellar solution in order to increase the solubility of very hydrophobic solutes in mobile phase. Both methanol and ethanol can be used as co-solvents for the separation of PAHs. Use of ethanol resulted in a shorter analysis time than use of methanol. The separations of some PAHs were unsatisfactory using propanol although the analysis time was much shorter than with ethanol. The influence of ethanol content, SDS concentration and temperature on the separations was studied. Benzene and nine polycyclic aromatic hydrocarbons were successfully separated using 50 mM SDS-20 mM phosphate-5 mM borate, containing 40% (v/v) ethanol at 35 degrees C. The relative standard deviation (R.S.D.) of t(R) ranged from 0.5 to 1.5% for six repeat injections.     

TheΛ b →Λ c decay form factors

The recently measured cross-sections for diffractive dissociation of nuclei in high-energy proton nucleus (pA) collisions show a strikingA ^1/3 dependence on the target massA. Such a dependence emerges from an optical model which incorporates a simple mechanism to produce the absorption fluctuations required for inelastic diffraction. The observed momentum transfer (t) dependence of the differential cross-section, dσ/dt∝ exp(?B|t|), is described in terms of a correlation length \(R_F = \sqrt {2B} \) of the absorption fluctuations which turns out to be of the size of a nucleon. The excitation massM dependence, dσ/dM ²∝M ^?2, is explained by a bremsstrahlung mechanism.     

On two methods of determining the ellipses and ellipsoids of positioning accuracy of robot manipulators

Summary When analysing the problem of the positioning accuracy of robot manipulators it is important to know how far random deviations of the hand may be from the desired position if the joint positioning errors possess a normal distribution. Two methods of determining the ellipses and ellipsoids of probability concentration are compared. The first of them is based on the standard procedure of the probability calculus. The second approximate method consists in finding at first the polygon or polyhedron of the positioning accuracy, and then in finding the ellipse or ellipsoid with principal axes and second order moments coinciding with those of the polygon or polyhedron, respectively. Examples of application demonstrate that these two methods give very close results.

---

Zwei Methoden zur Bestimmung der Ellipsen und Ellipsoide der Positioniergenauigkeit von Handhabungsrobotern

Übersicht Bei der Untersuchung der Positioniergenauigkeit von Handhabungsrobotern ist es wichtig, die Größe zufälliger Abweichungen des Greifers von der erstrebten Position zu kennen, wenn die Lagefehler der Verbindungen eine Normalverteilung besitzen. Es werden zwei Methoden zur Bestimmung der Ellipsen bzw. Ellipsoide der Wahrscheinlichkeitsdichte verglichen. Die erste beruht auf dem Standardverfahren der Wahrscheinlichkeitsrechnung. Die zweite Näherungsmethode besteht darin, daß zunächst das Polygon bzw. Polyeder der Positioniergenauigkeit bestimmt wird und danach die Ellipse bzw. das Ellipsoid mit den Hauptachsen und Momenten zweiter Ordnung wie das Polygon oder Polyeder. Beispiele zeigen, daß beide Methoden zu sehr ähnlichen Ergebnissen führen.

     

Struktur von 7,11-Diphenyl-2,4-diazaspiro[5,5]undecan-1,3,5,9-tetraonen durch LIS-NMR

A semi-quantitative method for determining distances between a possible coordination centre and protons from LIS-NMR values is developed for the title compounds3, although these have four coordination points. This makes it possible to propose structures and conformations for the isomers of3.

---

---

Mit 4 Abbildungen

---

H.-H. Otto undH. Yamamura, Ann. Chem., im Druck.     

Study of occupational health impact of atmospheric pollution on exposed workers at an iron and steel complex by using neutron activation analysis of scalp hair

The occupational health impact of atmospheric pollution on exposed workers at one iron and steel complex was studied by instrumental neutron activation analysis of workers' hair samples and medical examination. The experimental results indicate that there is a positive correlation between the high inhalation amounts of iron and other trace elements by the exposed workers and the symptom of their high blood pressure and hypoglycemia, which implies that the atmospheric environment polluted by iron and steel industry has an adverse health impact on the exposed workers. The measures to relieve and abate the occupational diseases caused by air-borne particulate matter should be taken     

NMR determination of absolute site-specific natural isotope ratios of hydrogen in organic molecules. Analytical and mechanistic applications

It has been shown that the “internal” isotope distribution within a given molecular species at the natural abundance level is accessible by a new method, SNIF-NMR, which is based on deuterium NMR. Relative internal factors, R_i/j,have been defined which enable the isotope content of a given site, i, to be compared to that of another molecular site, j, taken as the reference. Several referencing methods intended to provide direct access to relative $\text{externals}$, T_i , and $\text{absolute}$, (D/H)_i , site-specific parameters, are now discussed from both the theoretical and the experimental points of view. In the $\text{intramolecular referencing method}$, which involves a time-consuming chemical transformation of the sample, the risk exists of more or leas systematic errors resulting from discriminating fractionation effects. However this technique offers, conversely, an interesting way of investigating kinetic isotope effects without the need for specific labelling. In spite of its lower spectral precision the $\text{external referencing method}$ has the advantage of being fast and less sensitive to systematic errois and may be used for direct rough routine determinations of the site-specific isotope contents. More precise results can be obtained, at the price of contaminating the sample, when an $\text{intermolecular reference}$ is added and signal heights are used, remembering however that the intensity parameters then have no strict physical meaning in terms of absolute isotope contents. The site-specific parameters, T_i and (D/H)_i thus accessible, provide new information on the mechanisms of the fractionation effects occurring in natural conditions and examples are considered.     

Determination of the pesticides Chlorpropham,Propham, Propoxur,and Terbucarb by low temperature phosphorimetry

Summary Simple, direct, and sensitive low temperature phosphorimetric methods for the determination of Chlorpropham, Propham, Propoxur, and Terbucarb in EPA solvent are described. The minimum detectable amounts are 0.01 p. p. m. for Chlorpropham and Propham and 0.02 and 0.3 p. p. m. for Propoxur and Terbucarb respectively. The ranges of linearity of the analytical calibration graphs are 0.05-7.5, 0.05–10, 0.5–50, and 1–50 p. p. m. for Chlorpropham, Propham, Propoxur, and Terbucarb respectively. The procedure for Chlorpropham has been applied to the analysis of a solid commercial formulation.

---

Bestimmung der Pesticide Chlorpropham, Propham, Propoxur und Terbucarb bei Tief-Temperatur-Phosphorimetrie

Zusammenfassung Einfache, direkte und empfindliche Methoden für die Bestimmung der genannten Pesticide in dem Lösungsmittel Diethylether-i-Pentan-abs. Ethanol wurden beschrieben. Die geringsten nachweisbaren Mengen sind 0,01 ppm für Chlorpropham und Propham sowie 0,02 und 0,3 ppm für Propoxur und Terbucarb. Die Eichkurven verlaufen zwischen 0,05 und 7,5, 0,05 und 10, 0,5 und 50 sowie zwischen 1 und 50 ppm für Chlorpropham, Propham, Propoxur bzw. Terbucarb linear. Das Verfahren für Chlorpropham wurde zur Analyse eines festen Handelsproduktes angewendet.

     

Studium des gegenseitigen Einflusses der Bindungen in Thiocyanat-Kupfer(II)-Komplexen mit Methyl- und Dimethylpyridinen mittels Infrarotspektroskopie

The infrared spectra of thiocyanato-copper(II) complexes of the type Cu(NCS)₂ L ₂ with all isomeric picolines and lutidines (L) as well as those of the type Cu(NCS)₂ L ₃ withL=3- and 4-picoline, 3,4- and 3,5-lutidine were measured. The behaviour of the (CN) stretching vibrations of the Cu(NCS)₂ L ₂ complexes led to conclusions on the different kind of coordination of the NCS groups in dependence on the ligandL. The mutually conditioned strength of the Cu–NCS and Cu–N(L) bonds in the equatorial plane, especially in the presence of ligandsL with the steric effect, was determined from the frequency shift of the Cu–NCS and Cu–N(L) stretching vibrations with regard to the vibrations for Cu(NCS)₂(pyridine)₂.

---

---

Mit 1 Abbildung