Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.     

Characterisation of the reduction properties of La0.5Sr0.5Fe0.5Co0.5O3

We report here on the characterisation by temperature programmed reduction, ⁵⁷Fe Mössbauer spectroscopy and X-ray absorption spectroscopy of the phases resulting from treatment of the perovskite-related material La_0.5Sr_0.5Fe_0.5Co_0.5O₃ in a flowing 90% hydrogen/10% nitrogen atmosphere. The results show that treatment of La_0.5Sr_0.5Fe_0.5Co_0.5O₃ (which contains approximately 50% Fe⁴⁺ and 50% Fe³⁺) in the flowing 90% hydrogen/10% nitrogen atmosphere at 600°C does not result in the reduction of any of the constituent elements of the material and that the perovskite structure is still retained. The Mössbauer spectrum recorded following heating in the gaseous reducing environment at 1,000°C shows the presence of metallic iron, an Fe³⁺-containing phase with parameters compatible with the presence of SrLaFeO₄ which has a K₂NiF₄-type structure, and a paramagnetic Fe³⁺ phase. The X-ray absorption spectroscopy results show the presence of metallic cobalt. The Mössbauer spectrum recorded following heating at 1,200°C continues to show the Fe³⁺-containing components plus a larger contribution from metallic iron. The X-ray absorption spectroscopy results show the presence of metallic cobalt, SrLaFeO₄, La₂O₃ and SrO.     

High temperature thermoelectric properties of Nb-doped ZnO ceramics

Solid-state reaction processing technique was used to prepare Zn_xNb_1−xO (0≤x≤0.02) polycrystalline bulk samples. In the present study, we find that their lattice parameters a and c tend to decrease with increasing amount of Nb additive. The electrical conductivity of all the Zn_1−xNb_xO samples increased with increasing temperature, indicating a semiconducting behavior in the measured temperature range. The addition of Nb₂O₅ to ZnO led to an increase in the electrical conductivity and a decrease in the absolute value of the Seebeck coefficient. The best performance at 1000 K has been observed for nominal 0.5 at% Nb-doped ZnO, with an electrical resistivity of about 73.13 (S cm⁻¹) and Seebeck coefficient of ∼257.36 μV K⁻¹, corresponding to a power factor (S²σ) of 4.84×10⁻⁴ Wm⁻¹ K⁻². The thermal conductivity, κ, of the oxide decreased as compared to pure ZnO. The figure of merit ZT values of ZnO-doped Nb₂O₅ samples are higher than the ZnO pure sample, demonstrating that the Nb₂O₅ addition is fairly effective for enhancing thermoelectric properties.     

Segregation effect in symmetric cellular automata model for two-lane mixed traffic

Segregation effects commonly exist in granular mixtures with difference in size, shape or density. In mixed traffic flow, slow vehicle and fast vehicle, as two types of particles, have different desired speed. We investigate the segregation along the road in mixed traffic flow by using a symmetric two-lane cellular automata model. A parameter D, which quantifies the degree of segregation, is defined. We study the density dependency of the parameter at different randomization probability. Simulation results show that segregation is more obviously in free flow region. We argue that the overtaking maneuvers have similar effect as percolation in granular flow.     

Spectral properties and energy transfer of Yb,Er:GdVO4 crystal

GdVO₄ single crystal co-doped with Yb³⁺ and Er³⁺ was grown by the Czochralski method. The X-ray powder diffraction pattern of Yb,Er:GdVO₄ crystal confirms that the as-grown crystal is isostructural with pure GdVO₄ crystal. Its polarized absorption spectra and non-polarized fluorescence spectra were measured at room temperature. The absorption band at 984 nm for π-polarization has an FWHM of about 36 nm, which is favorable for InGaAs LD laser pumping. The spectrum properties of Er³⁺ in Yb,Er:GdVO₄ crystal were investigated based on Judd–Ofelt theory. There is strong energy transfer from Yb³⁺ to Er³⁺ in this crystal. When excited with 980 nm radiation, this crystal emitted strong fluorescence at about 1529 nm and 552.5 nm. The total energy transfer rate and efficiency from Yb³⁺ to Er³⁺ is 3.33 ms^-1 and 67%, respectively. The energy transfer between Er³⁺ and Yb³⁺ ions is a multistep transfer process, and was investigated based on a random-walk model. The investigation result shows that there is strong cooperative-sensitization effect from Yb³⁺ to Er³⁺, which is the main upconversion energy-transfer process in this crystal. PACS 42.70.Hj; 81.10.Fq; 42.55.Rz     

Use of 4-bromo pyridazine 3,6-dione for building 3-amino pyridazine libraries

An efficient method for preparation of 4,6 or 5,6 disubstituted 3-aminopyridazines was easily carried out starting from easily available 4-bromo-pyridazine-3,6-dione, and using combination of both amination and Pd(0) cross-coupling reactions under microwave irradiation.     

Influence of the electric characteristics of II–VI semiconductor material on the electroluminescence of lanthanide complex

The organic-inorganic combined structural device (ITO/PVK:Eu/ZnS/Al) is fabricated based on layered optimization scheme. II–VI semiconductor material ZnS is acted as an electron function (transporting and acceleration) layer. The hot electrons which have been accelerated in the ZnS layer directly impact excitation europium ions through resonant energy transfer and then recombine with injected holes to form excitons in PVK or EuTTA₂(N-HPA)Phen. Europium (Eu) ions may also be excited by intramolecular energy transfer from ligands. There are two kinds of excitation mechanisms: impacted excitation and injected recombination for the combined structural device. The electroluminescence (EL) intensity of the combined structural device is strongly improved and reaches up to 381 cd/m² at 20 V compared with the pure organic structural device. It may be an effective method to improve the EL intensity of the lanthanide complex by using electric characteristics of inorganic semiconductor materials.     

A Mössbauer spectroscopic study of an industrial catalyst for dehydrogenation of etylbenzene to styrene

Iron oxide catalyst with spinel structure used for dehydrogenation of ethylbenzene is one kind of important catalyst in petrochemical industry. In this work several series of industrial catalyst were prepared with different components and different manufacturing processes. Mössbauer Spectroscopy has been used to determine the optimal components and the better manufacturing process for spinel structure formation. The results may prove useful for producing the industrial dehydrogenation catalyst with better catalytic property.     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.