Synthesis and Properties of Polyetherketones Containing Sulfide and Phthalazinone

High molecular weight copoly(ether ketone)s (PEK) based on 4-(4-hydroxyphenyl)-1-phthalazinone (DHPZ)/4,4′-thiobisphenol (TBP)/4,4′-diflourodiphenylketone (DFK) were prepared by nucleophilic substitution polycondensation. The copolymers were characterized by FT- and ^1H-NMR. Thermal properties and solubility of copolymers were studied.     

Effects of polybutadiene-g-SAN impact modifiers on the morphology and mechanical behaviors of ABS blends

A series of PB-g-SAN impact modifiers with different ratio of PB to SAN ranging from 20.6/79.4 to 91.9/8.1 were synthesized by seeded emulsion polymerization. ABS blends were prepared by blending these PB-g-SAN impact modifiers and SAN resin. The rubber concentration of these ABS blends was kept at a constant value of 15 wt%. The influences of different impact modifier on the mechanical behavior and morphology of ABS blends have been investigated. The dynamic mechanical analysis on ABS blends shows that T_g of the rubbery phase shifts to a lower temperature, (tan δ)_max of the rubbery phase increases and then decreases with the increase of PB concentration in PB-g-SAN impact modifier. A uniform dispersion of rubber particles in the matrix can be observed when PB/SAN ratio in PB-g-SAN impact modifier is in the range from 20.6/79.4 to 71.7/28.3. When it exceeds 71.7/28.3, an agglomeration of rubber particles occurs. The mechanical tests indicate that the ABS blend, in which PB/SAN ratio in the impact modifier is 71.7/28.3, has the maximum impact strength and yield strength.     

Separation study of mercury through an emulsion liquid membrane

A study of the transport of Hg(II) ions through a tri-n-octylamine (TOA) - sorbital monooleate (Span 80) -toluene liquid membrane has been performed with varying concentrations of HCl, KCl, TOA, Span 80 and NaOH in the feed, membrane and stripping solutions. Maximum transport was observed with 0.01 M KCl, 2.5 x 10(-2) M HCl, 1.5 x 10(-2) M TOA, 3% (w/v) Span 80 and 0.05 M NaOH. With this system, mercury could be completely separated from Cu, Zn, Fe, Co, Ni, Pb, Mn and Cd. The transport mechanism of this metal ion through the membrane is based on the association of metal anions (HgCl(4)(2)) with protonated TOA molecules at the feedside interface, diffusion through the membrane, decomposition of the complex at the strip-solution-side membrane interface under alkaline conditions, and backdiffusion of TOA molecules. Transport with the membrane is dependent on the concentration gradient but in the surrounding solutions it is inversely related to the concentration gradient.     

Spectroscopy, NMR and DFT studies on molecular recognition of crown ether bridged chiral heterotrinuclear salen Zn(II) complex

A barium-containing crown ether bridged chiral heterotrinuclear salen Zn(II) complex BaZn2L(ClO4)2, where L is a folded dinuclear chiral (R,R)-salen ligand, has been synthesized and characterized by elemental analysis, 1H NMR, UV-vis, IR, circular dichroism (CD) spectra, and mass spectra. As a folded dinuclear chiral host, its recognition with achiral guests (imidazole derivatives), rigid bidentate guest (1,4-diazobicyclo[2,2,2]octane, DABCO) and chiral guests (amino acid methyl esters) was investigated by means of UV-vis spectrophotometric titration, CD spectra. The association constants of D-amino acid methyl esters are found to be higher than those of their L-enantiomer. The sandwich-type binding of BaZn2L(ClO4)2-DABCO supramolecular assembly was specially studied via 1H NMR titration and 1H ROESY. To understand the recognition on molecular level, density functional theory (DFT) calculations on B3LYP/LanL2DZ were performed on the minimal energy conformations of host, guests, and host-guest complexes. The minimal energy conformations were obtained by molecular mechanics (MM) optimization and molecular dynamics (MD) simulation. The results of single point energy, HOMO energy, and charges transfer were analyzed. The results of theoretical calculations are in good agreement with the experimental data.     

Detection of DNA adducts of benzo[a]pyrene using immunoelectrophoresis with laser-induced fluorescence. Analysis of A549 cells

Detection of benzo[a]pyrene diol epoxide (BPDE)-damaged DNA in a human lung carcinoma cell line (A549) has been performed using free zone affinity capillary electrophoresis with laser-induced fluorescence (LIF). Using BPDE as a model carcinogenic compound, the speed, sensitivity and specificity of this technique was demonstrated. Under free zone conditions, an antibody bound adduct was baseline-resolved from an unbound adduct in less than 2 min. The efficiencies of separation were in excess of 6 x 10(5) and 1 x 10(6) plates per meter for the antibody-bound and unbound adducts, respectively. Separation using a low ionic strength buffer permitted the use of a high electric field (830 V/cm) without the loss of resolving power. Using LIF detection, a concentration detection limit of roughly 3 x 10(-10) M was achieved for a 90-mer oligonuleotide containing a single BDPE. The use of formamide in the incubation buffer to enhance denaturing of DNA did not affect the stability of the complex between the antibody and the adducts. Using a fluorescently labeled BPDE-modified DNA adduct probe, a competitive assay was established to determine the levels of BPDE-DNA adducts in A549 cells.     

Capillary electrochromatography of proteins and peptides with a cationic acrylic monolith

For the separation of proteins and peptides by capillary electrochromatography (CEC), columns with a monolithic stationary phase were prepared from silanized fused-silica capillaries of 50 microm I.D. by in situ copolymerization of glycidyl methacrylate, methyl methacrylate and ethylene glycol dimethacrylate in the presence of propanol and formamide as porogens. The epoxide groups at the surface of the porous monolith were reacted with N-ethylbutylamine to form fixed tertiary amino functions with ethyl- and butyl-chains. A mixture of ribonuclease A, insulin, alpha-lactalbumin and myoglobin was separated isocratically by counterdirectional CEC with hydro-organic mobile phases containing acetonitrile and sodium phosphate buffer, pH 2.5. The separation of four angiotensin type peptides by CEC was also achieved under similar conditions. The elution order of proteins was similar to that obtained in reversed-phase chromatography. Plots of the migration factors for proteins and peptides against the acetonitrile concentration exhibit opposite trends. This is most likely due to the greater chromatographic retention and lower electrophoretic migration velocity of proteins than that of peptides in the counterdirectional CEC system. From this it is concluded that the separation is governed by a dual mechanism that involves the complex interplay between selective chromatographic retention and differential electrophoretic migration.     

α-Tetralone glycosides from the green walnut husks of Juglans mandshurica Maxim. and their cytotoxic activities

Abstract

Five new α-tetralone glycosides, juglanbiosides A-E (1–5), together with an α-tetralone derivative (15) and nine known 1,4-naphthoquinones (6–14) were isolated from the 95% EtOH extract of green walnut husks of Juglans mandshurica Maxim. Their structures were elucidated by comprehensive spectroscopic methods (¹H, ¹³C NMR, DEPT, HSQC, HMBC, CD, HR-ESI-MS). In vitro cytotoxicities of all the isolated compounds were evaluated against BGC-823, HCT-15 and K562 cancer cell lines.

     

Two New Diterpenoids from Callicarpa pedunculata

Two new diterpenoids, pedunculatic acid A (= (4R,5α,7α)‐7‐ethoxy‐9β,13β‐dioxyabiet‐8(14)‐en‐18‐oic acid; 1 ) and pedunculatic acid B (= (4S,5α,12β)‐8β,14β‐epoxy‐12‐hydroxy‐11‐oxototaran‐19‐oic acid; 2 ), together with three known sesquiterpenoids, were isolated from the Chinese medicinal herb Callicarpa pedunculata R. Brown . Their structures were elucidated by spectroscopic analyses, including 1D‐ and 2D‐NMR, and by high‐resolution mass spectrometry.     

Poly(N-isopropylacrylamide). I. Interactions with sodium dodecyl sulfate measured by conductivity

Conductometric titration of poly(N-isopropylacrylamide) (polyNIPAM) with sodium dodecyl sulfate (SDS) gave two apparent transitions labeled C1 and C2. The C1 transition was independent of polyNIPAM concentration in the 0.05–0.3 wt % range, whereas C2 was proportional to the polymer concentration. C1 corresponded to the onset of binding of surfactant with polymer. Arguments based on a simple mass action model for micellization are presented to show that C2, the second transition, is not due to any simple explanation such as being the point above which only free micelles are formed with surfactant addition. The cloud point of polyNIPAM increased with the amount of bound surfactant. This was attributed to electrostatic contribution of bound sulfate groups to the increased solubility of polyNIPAM. © 1993 John Wiley & Sons, Inc.