On the Dual Phosphorescence of Xanthone and Chromone in Glassy Hydrocarbon Hosts

Trace quantities of hydrogen‐bonding impurities in otherwise highly purified and dried glassy hydrocarbon matrices at 77 K can modify the relative triplet state energy levels, and hence the photophysical properties of two aromatic ketones, xanthone and chromone, to the extent that the intrinsic spectroscopic properties are obscured. The intrinsic spectroscopic properties of each are revealed in multicrystalline n‐alkane Shpol'skii matrices, and also can be observed in rigorously purified and dried hydrocarbon glasses at 77 K. The extreme sensitivity to stoichiometric, and even substoichiometric quantities of hydrogen‐bonding impurities arises from the near‐degeneracy of the two lowest‐lying triplet states, and the sensitive nature of the n→π* blueshift phenomena to specific hydrogen‐bonding interactions.     

Well‐Defined Palladium Nanoparticles Supported on Siliceous Mesocellular Foam as Heterogeneous Catalysts for the Oxidation of Water

Herein, we describe the use of Pd nanoparticles immobilized on an amino‐functionalized siliceous mesocellular foam for the catalytic oxidation of H₂O. The Pd nanocatalyst proved to be capable of mediating the four‐electron oxidation of H₂O to O₂, both chemically and photochemically. The Pd nanocatalyst is easy to prepare and shows high chemical stability, low leaching, and recyclability. Together with its promising catalytic activity, these features make the Pd nanocatalyst of potential interest for future sustainable solar‐fuel production.     

Shaping the Light: The Key Factors Affecting the Photophysical Properties of Fluorescent Polymer Nanostructures

To manipulate the functions of nanomaterials more precisely for diverse applications, the controllability and critical influencing factors of their properties must be thoroughly investigated. In this work, the macroscopic and microscopic effects are studied on the photophysical properties of various pyrene‐ended poly(styrene‐block‐methyl methacrylate) nanostructures. Fluorescent polymer nanospheres, nanorods, and nanotubes are prepared by different template‐based methods using anodic aluminum oxide membranes. Chain arrangements and conformations are determined as the key factors affecting the photophysical properties of the fluorescent polymer nanostructures. This work not only gives a deeper understanding of the effects on the photophysical properties of polymer nanomaterials influenced by morphologies, chain arrangements, and chain conformations, but also provides a reference for designing proper fluorescent nanostructures for specific applications.

     

TMDIM: an improved algorithm for the structure prediction of transmembrane domains of bitopic dimers

\(\alpha\)-Helical transmembrane proteins are the most important drug targets in rational drug development. However, solving the experimental structures of these proteins remains difficult, therefore computational methods to accurately and efficiently predict the structures are in great demand. We present an improved structure prediction method TMDIM based on Park et al. (Proteins 57:577–585, 2004) for predicting bitopic transmembrane protein dimers. Three major algorithmic improvements are introduction of the packing type classification, the multiple-condition decoy filtering, and the cluster-based candidate selection. In a test of predicting nine known bitopic dimers, approximately 78% of our predictions achieved a successful fit (RMSD <2.0 Å) and 78% of the cases are better predicted than the two other methods compared. Our method provides an alternative for modeling TM bitopic dimers of unknown structures for further computational studies. TMDIM is freely available on the web at https://cbbio.cis.umac.mo/TMDIM. Website is implemented in PHP, MySQL and Apache, with all major browsers supported.     

Distortion theorems for normalized biholomorphic quasi-convex mappings

In this paper, we will use the Schwarz lemma at the boundary to character the distortion theorems of determinant at the extreme points and distortion theorems of matrix on the complex tangent space at the extreme points for normalized locally biholomorphic quasi-convex mappings in the unit ball B ⁿ respectively.     

Cauliflower-like CdS microspheres composed of nanocrystals and their physicochemical properties

Cauliflower-like cadmium sulfide (CdS) microspheres composed of nanocrystals have been successfully synthesized by a hydrothermal method using poly(ethylene glycol) (PEG) as the template coordination agent and characterized by a variety of methods. Our experiments confirmed that the size of the CdS microspheres could be easily modified by controlling the chain length of PEG. Powder X-ray diffraction and Raman spectroscopy measurements revealed the cubic structure of the CdS microspheres; morphological studies performed by HR-SEM and HR-TEM methods showed the cauliflower-like structure of the synthesized CdS microspheres. Each microsphere was identified to be created by the self-assembly of CdS nanocrystals and is attributed to the oriented aggregation of the CdS nanocrystals around a polymer-Cd(2+) complex spherical framework structure. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray (EDX) analysis confirmed the stoichiometries of the CdS microspheres. Diffuse reflectance spectrum (DRS) measurements showed that increasing the PEG chain length increased the band gap value of the CdS microspheres slightly, from 1.99 to 2.06 eV. The cauliflower-like CdS microspheres could be applied to photocatalytic degradation studies.     

Synthesis and microwave dielectric properties of Ca<Subscript>0.6</Subscript>La<Subscript>0.267</Subscript>TiO<Subscript>3</Subscript> nanocrystalline powders by sol–gel method

Ca_0.6La_0.267TiO₃ nanocrystalline powders were successfully synthesized by the sol–gel method using PEG1000 as a dispersant in this study. The sinterability of the powders and the microwave dielectric properties of the ceramics were also investigated. The XRD diffraction result showed that pure Ca_0.6La_0.267TiO₃ powder with orthorhombic perovskite structure could be synthesized at 600 °C for 2 h without any detectable intermediate phase. The average grain size of the as-synthesized powder was as low as 35 nm. Compared with Ca_0.6La_0.267TiO₃ ceramics fabricated by conventional solid-state process, the bulk materials prepared by sintering as-prepared nanopowders performed better in densification and microwave dielectric properties. The ceramics sintered at 1,300 °C exhibited a higher relative density of 98.3% combined with a dielectric constant (ε _r ) of 120.3, a quality factor (Q × f) of 23,550 GHz and a temperature coefficient of resonant frequency (τ _f ) of +220.7 ppm/°C, respectively.     

Induction of a High-Yield Lovastatin Mutant of Aspergillus terreus by 12C6+ Heavy-Ion Beam Irradiation and the Influence of Culture Conditions on Lovastatin Production Under Submerged Fermentation

Heavy-ion beams, possessing a wide mutation spectrum and increased mutation frequency, have been used effectively as a breeding method. In this study, the heavy-ion beams generated by the Heavy-Ion Research Facility in Lanzhou were used to mutagenize Aspergillus terreus CA99 for screening high-yield lovastatin strains. Furthermore, the main growth conditions as well as the influences of carbon and nitrogen sources on the growth and the lovastatin production of the mutant and the original strains were investigated comparatively. The spores of A. terreus CA99 were irradiated by 15, 20, 25, and 30 Gy of 80 MeV/u (12)C(6+) heavy-ion beams. Based on the lovastatin contents in the fermentation broth, a strain designated as A. terreus Z15-7 has been selected from the clone irradiated by the heavy-ion beam. When compared with the original strain, the content of lovastatin in the fermentation broth of A. terreus Z15-7 increased 4-fold. Moreover, A. terreus Z15-7 efficiently used the carbon and nitrogen sources for the growth and production of lovastatin when compared to the original strain. The maximum yield of lovastatin, 916.7 μg/ml, was obtained as A. terreus Z15-7 was submerged cultured in the chemically defined medium supplemented with 3% glycerol as a carbon source, 1% corn meal as an organic nitrogen source, and 0.2% sodium nitrate as an inorganic nitrogen source at 30 °C in the shake flask. The result shows that heavy-ion beam irradiation is an effective method for the mutation breeding of lovastatin production of A. terreus.     

Deprotonative metalation of chloro- and bromopyridines using amido-based bimetallic species and regioselectivity-computed CH acidity relationships

A series of chloro- and bromopyridines have been deprotometalated by using a range of 2,2,6,6-tetramethylpiperidino-based mixed lithium-metal combinations. Whereas lithium-zinc and lithium-cadmium bases afforded different mono- and diiodides after subsequent interception with iodine, complete regioselectivities were observed with the corresponding lithium-copper combination, as demonstrated by subsequent trapping with benzoyl chlorides. The obtained selectivities have been discussed in light of the CH acidities of the substrates, determined both in the gas phase and as a solution in THF by using the DFT B3LYP method.     

Small Pd nanoparticles supported in large pores of mesocellular foam: an excellent catalyst for racemization of amines

Highly dispersed palladium nanoparticles (1–2 nm) supported in large‐pore mesocellular foam (MCF; 29 nm) were synthesized. The Pd‐nanocatalyst/MCF system was characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The performance of the Pd nanocatalyst obtained was examined for amine racemization. The Pd nanocatalyst showed higher activity and selectivity toward racemization of (S)‐1‐phenylethyl amine than any other amine racemization catalyst reported so far and it could be reused several times. Our data from TEM and XRD suggest a restructuring of the Pd nanocatalyst from amorphous to crystalline and an increase in Pd nanocatalyst size during the racemization reaction. This led to an unexpected increase of activity after the first use. The Pd nanocatalyst obtained can be integrated with other resolving processes of racemic organic compounds to increase the yield of chiral organic products.