Synthesis of Blue‐, Green‐, Yellow‐, and Red‐Emitting Graphene‐Quantum‐Dot‐Based Nanomaterials with Excitation‐Independent Emission

A one‐pot method is described for the preparation of graphene quantum dots/graphene oxide (GQDs/GO) hybrid composites with emission in the visible region, through heteroatom doping and hydroxyl‐radical‐induced decomposition of GO. The NH₄OH‐ and thiourea‐mediated dissociation of H₂O₂ produces hydroxyl radicals. Treatment of GO with hydroxyl radicals results in the production of small‐sized GO sheets and GQDs, which self‐assemble to form GQDs/GO through strong π–π interactions. For example, the reaction of GO with a mixture of NH₄OH and H₂O₂ for 40, 120, and 270 min generates yellow‐emitting GQDs/GO (Y‐GQDs/GO), green‐emitting GQDs/GO, and blue‐emitting GQDs, while red‐emitting GQDs/GO (R‐GQDs/GO) are prepared by incubating GO with a mixture of thiourea and H₂O₂. From the analysis of these four GQD‐based nanomaterials by transmission electron microscopy, atomic force microscopy, and fluorescence lifetime spectroscopy, it is found that this tunable fluorescence wavelength results from the differences in particle size. All four GQD‐based nanomaterials exhibit moderate quantum yields (1–10%), nanosecond fluorescence lifetimes, and excitation‐independent emissions. Except for R‐GQDs/GO, the other three GQD‐based nanomaterials are stable in a high‐concentration salt solution (e.g., 1.6 m NaCl) and under high‐power irradiation, enabling the sensitive (high‐temperature resolution and large activation energy) and reversible detection of temperature change. It is further demonstrated that Y‐GQD/GO can be used to image HeLa cells.     

Multiphoton double ionization of Ar in intense extreme ultraviolet laser fields studied by shot-by-shot photoelectron spectroscopy

Photoelectron spectroscopy has been performed to study the multiphoton double ionization of Ar in an intense extreme ultraviolet laser field (hν ～ 21 eV, ～ 5 TW/cm2), by using a free electron laser (FEL). Three distinct peaks identified in the observed photoelectron spectra clearly show that the double ionization proceeds sequentially via the formation of Ar(+): Ar+hν→Ar (+) + e? and Ar2(+) + 2hν→Ar(+) + e?. Shot-by-shot recording of the photoelectron spectra allows simultaneous monitoring of FEL spectrum and the multiphoton process for each FEL pulse, revealing that the two-photon ionization from Ar(+) is significantly enhanced by intermediate resonances in Ar(+).     

Low-Loss Fiber De-Multiplexers

Reported are fiber de-multiplexers based on side-polished fibers with a long interaction length and intra-core fiberBragg gratings. In conjunction with the silicon processing technologies, we demonstrate fiber filters and advantages ofour approaches are addressed.     

Exact solution of Maxwell's equations for optical interactions with a macroscopic random medium

We report what we believe to be the first rigorous numerical solution of the two-dimensional Maxwell equations for optical propagation within, and scattering by, a random medium of macroscopic dimensions. Our solution is based on the pseudospectral time-domain technique, which provides essentially exact results for electromagnetic field spatial modes sampled at the Nyquist rate or better. The results point toward the emerging feasibility of direct, exact Maxwell equations modeling of light propagation through many millimeters of biological tissues. More generally, our results have a wider implication: Namely, the study of electromagnetic wave propagation within random media is moving toward exact rather than approximate solutions of Maxwell's equations.     

Ablation of Transparent Materials Using Excimer Lasers for Photonic Applications

For many years, the development of effective ablation or laser machining techniques for making micro-optical components has been the key factor in the birth of new photonic devices and systems. In this article, the ablation characteristics of two types of the most important transparent materials, transparent polymers and glasses, are studied. Simple shaped microcavities are first machined for studying the fundamental ablation parameters, including threshold fluence, effective absorption coefficient, and ablation rate. In studying polymer ablation, five standard grades and five proprietary polymeric compounds are selected. Ablation techniques using these transparent polymers for making arrayed ferrules and curved microlenses are presented. Applications of these ablated microstructures for optical fiber connectors, optical fiber coupling and alignment, and transparent chip encapsulants, are introduced and demonstrated with emphasis on the quality of the ablated profiles and dimensions to satisfy the required performance. In glass ablation, borosilicate glasses are considered and their associated ablation behaviors are studied. The procedures to ablate glass-based arrayed microstructures with flat and curved surfaces are described. The utilizations of these arrayed microstructures for optical waveguide, wave absorber, and beam guider, are specifically discussed. Finally, concluding remakes for future trends are presented.     

Improvement of <Emphasis Type="Italic">n</Emphasis>-ZnO/<Emphasis Type="Italic">p</Emphasis>-Si photodiodes by embedding of silver nanoparticles

The photo-current of n-ZnO/p-Si heterojunction photodiodes was improved by embedding Ag nanoparticles in the interface (ZnO/nano-P_Ag/p-Si), and the ratio between photo- and dark-current increased by about three orders more than that of a n-ZnO/p-Si specimen. The improvement in the photo-current resulted from the light scattering of embedded Ag nanoparticles. The I–V curve of n-ZnO/p-Si degraded after thermal treatment (A-ZnO/p-Si) because the silicon robbed the oxygen from ZnO to form amorphous silicon dioxide and left an oxygen vacancy. Notably, the properties of ZnO/nano-P_Ag/p-Si were better in the time-dependent photoresponse under 10 V bias. Ag nanoparticles (15–20 nm) scattered the UV light randomly and increased the probability for the absorption of ZnO to enhance the properties of the photodiode.     

Pulsed spark-discharge assisted synthesis of colloidal gold nanoparticles in ethanol

A green method, using pulsed spark-discharge (PSD) to synthesize gold nanoparticles (AuNPs) in ethanol, is studied in this article. Unlike conventional methods for metal nanoparticles synthesis, the PSD method does not require the addition of chemical surfactants and stabilizers. The size of PSD–AuNPs is examined by transmission electron microscopy, with a range 5–50 nm. The chemical compounds, crystal structure, and surface plasmon resonance of PSD–AuNPs are studied using energy dispersive X-ray spectroscopy, X-ray diffraction, and UV–Visible spectroscopy, respectively. Zeta potential analysis shows that a negative charge (−40 mV) on the surface of the PSD–AuNPs may be contributing to the stability of the suspension. During the gold electrodes discharge in the ethanol, under an intensive electric field and thermal energy, bulk metallic gold and ethanol may produce AuNPs and varieties of chemical derivatives, which are also studied by GC/MS and FTIR to investigate the suspension mechanism. The analysis results show that there is an oxidation reaction of ethanol occurring during the PSD process to produce ethanol derivatives, such as acetaldehyde, acetic acid, and ethyl acetate, which may modify the surface of AuNPs by coordination of oxygen atoms. However, only acetic acid can form a negative charge by the deprotonation of the carboxylic group of surface in ethanol, resulting in the creation of a repulsion force between the particles to form the stable colloid system. The experimental results indicate that PSD is an alternative green process to synthesize gold nanoparticles suspension in ethanol. Moreover, with a gold rod consumption rate of 15 mg/L, concentrations of gold nanoparticles ~9 ppm have been observed; therefore, the net production rate is around 60%.     

Effects of post-annealing on the structural and nanomechanical properties of Ga-doped ZnO thin films deposited on glass substrate by rf-magnetron sputtering

In this study, the effects of post-annealing on the structure, surface morphology and nanomechanical properties of ZnO thin films doped with a nominal concentration of 3 at.% Ga (ZnO:Ga) are investigated using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) and nanoindentation techniques. The ZnO:Ga thin films were deposited on the glass substrates at room temperature by radio frequency magnetron sputtering. Results revealed that the as-deposited ZnO:Ga thin films were polycrystalline albeit the low deposition temperature. Post-annealing carried out at 300, 400 and 500 °C, respectively, has resulted in progressive increase in both the average grain size and the surface roughness of the ZnO:Ga thin film, in addition to the improved thin films crystallinity. Moreover, the hardness and Young's modulus of ZnO:Ga thin films are measured by a Berkovich nanoindenter operated with the continuous contact stiffness measurements (CSM) option. The hardness and Young's modulus of ZnO:Ga thin films increased as the annealing temperature increased from 300 to 500 °C, with the best results being obtained at 500 °C.     

Energy limits imposed by two-photon absorption for pulse amplification in high-power semiconductor optical amplifiers

We study the combined effects of dynamic gain saturation and two-photon absorption on the amplification of short pulses in semiconductor optical amplifiers and show that two-photon absorption can saturate the amplifier gain and limit the output pulse energies even for amplifiers with large gain saturation energies. We discuss the upper limits for the pulse energies obtainable from semiconductor optical amplifiers in the presence of two-photon absorption and show that for single transverse mode waveguide amplifiers these upper limits can range from values as small as a few picojoules to several hundred picojoules for pulse widths in the 0.5 ps to 20 ps range, respectively.     

Translation drag coefficient of a self-similar assembly of spheres immersed in an incompressible fluid.

On the basis of deterministic fractals and the Rotne-Prager hydrodynamic interaction tensor, we confirm the asymptotic as well as the finite size scaling of the friction coefficient lambda of a self-similar structure. The fractal assembly is made of N spheres with its dimension varying from D < 1 to D = 3. The number of spheres can be as high as N approximately O(10(4)). The asymptotic scaling behavior of the friction coefficient per sphere is lambda approximately N(1/D-1) for D > 1, lambda approximately (lnN)(-1) for D = 1, and lambda approximately N(0) for D < 1. The crossover behavior indicates that while in the regime of D > 1 the hydrodynamic screening effect grows with the size, for D<1 it is limited in a finite range, which decays with decreasing D.