CuO-BaO/SiO2催化剂的结构表征

以XRD、XPS和EXAFS手段对CuO－BaO／Sic2催化剂及其还原态的结构进行了研究．结果表明，在CuO－BaO／SiO2体系中铜和钡都是以氧化态的形式存在，超细SiO2载体对所负载的CuO的结构有影响．随着样品负载量的逐渐降低，Cu－O和Cu－Cu睡的健长和配位数逐渐征小，而且低载量样品的健长和配位数减小的幅度最大．在总负载量＞13．39％的样品中，CuO以晶相的形式存在；总负载量＜13．39％的样品中，CUO呈现单层分布的高分出状态．还原态样品中钢以本价铜的形式存在，随负载量的降低，还原态Cu－Cu健的镇长和配位数也分别呈现出逐渐减小的趋势．还原态中心铜原子在催化剂表面的分布状态基本上保持了氧化态催化剂中CuO物相的分市状态．     

可逆反应的热静力学研究法

化学反应的焓变△H和平衡常数K的测定是热静力学研究的重要任务。通常用量热法可以此较准确地测定△H,但要从量热数据直接得到K则是在六十年代初才开始有所探索。在达方面,Drago和Christensen的工作是值得借鉴的。本文建立了一种中性配位体与一价金属离子络合反应体系的热静力学研究法,并用这种方法研究了二苯并18-冠-6与Na~+的络合反应,同时得到了反应的△H和平衡常数K。实验值与文献值符合。     

关于氧化锌—二氧化硅表面结构和表面酸性的补充研究

我们管报道浸渍法制备的ZnO/SiO_2的表面酸性和表面结构。证明:(1) ZnO单层分散在硅胶表面,分散阔值为～0.22gZnO/100m~2SiO_2;(2) 样品表面出现了单独的ZnO与SiO_2所没有的较强酸位并且其酸量与ZnO表面浓度有很好的对应关系。由此提出了ZnO与SiO_2表面相互作用形成了某种酸性结构单元的观点。Sumiyoshi,Tanabe等曾报道,用共沉淀法制取的ZnO-SiO_2表面酸性显著。认为酸性的根源是ZnO与SiO_2间形成了田部(K.Tanabe)模型所预示的那种二氧化物,结构中     

Study on the nature of interaction of BrCl with HF,H2O,and NH3

By counterpoise‐corrected optimization method, the interactions of BrCl with the first‐row hydrides (HF, H₂O, NH₃) have been investigated at the MP2/6–311++G(3d,3p) level. To understand that the X? Br‐type (X = F, O, N) structure is more stable than the corresponding hydrogen‐bonded structure in these complexes, the electronic properties were also investigated. Symmetry‐adapted perturbation theory (SAPT) analysis has been carried out to understand the nature of the weak hydrogen bond and X? Br‐type interactions. On the other hand, for the weak hydrogen‐bonded complexes and the X? Br‐type complexes charges transfer is well correlated with the total induction energies. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Simultaneously achieving high capacity storage and multilevel anti-counterfeiting using electrochromic and electrofluorochromic dual-functional AIE polymers

With the advent of the big data era, information storage and security are becoming increasingly important. However, high capacity information storage and multilevel anti-counterfeiting are typically difficult to achieve simultaneously. To address this challenge, herein, two electrochromic and electrofluorochromic dual-functional polymers with aggregation-induced emission (AIE) characteristics were rationally designed and facilely prepared. Upon applying voltages, the absorption and fluorescence spectra of the AIE polymers can undergo reversible changes, accompanied by variation of their color and emission. By utilizing the controllable characteristics of the polymers, dual-mode display devices were fabricated via a simple spraying technique. More interestingly, a four-dimensional color code device was constructed by adding color change multiplexing to the two-dimensional space, thereby achieving high capacity information storage. Moreover, the color code device can also be applied in the multilevel anti-counterfeiting area. The encrypted information can be dynamically converted under different voltages. Thus, the AIE polymers show great promise for applications in multidimensional information storage and dynamic anti-counterfeiting, and the design strategy may provide a new avenue for advanced information storage and high security technology.

By using electrical stimuli-responsive AIE polymers, dual-mode display devices, multidimensional information storage and anti-counterfeiting devices were constructed.     

Correction: Click activated protodrugs against cancer increase the therapeutic potential of chemotherapy through local capture and activation

Correction for ‘Click activated protodrugs against cancer increase the therapeutic potential of chemotherapy through local capture and activation’ by Kui Wu et al., Chem. Sci., 2021, 12, 1259–1271, DOI: 10.1039/D0SC06099B.

The authors regret that the reference to the bond-breaking bioorthogonal chemistry, termed ‘click-to-release’ was omitted from the original article. In addition, we would like to include a reference describing the synthesis of compound 1, which is an intermediate to the protodrugs described in the original article. These references are listed below as ref. 1 and 2.The Royal Society of Chemistry apologizes for these errors and any consequent inconvenience to authors and readers.     

Microfluidic synthesis of high-valence programmable atom-like nanoparticles for reliable sensing

Synthesis of programmable atom-like nanoparticles (PANs) with high valences and high yields remains a grand challenge. Here, a novel synthetic strategy of microfluidic galvanic displacement (μ-GD) coupled with microfluidic DNA nanoassembly is advanced for synthesis of single-stranded DNA encoder (SSE)-encoded PANs for reliable surface-enhanced Raman scattering (SERS) sensing. Notably, PANs with high valences (e.g., n-valence, n = 12) are synthesized with high yields (e.g., >80%) owing to the effective control of interfacial reactions sequentially occurring in the microfluidic system. On the basis of this, we present the first demonstration of a PAN-based automatic analytical platform, in which sensor construction, sample loading and on-line monitoring are carried out in the microfluidic system, thus guaranteeing reliable quantitative measurement. In the proof-of-concept demonstration, accurate determination of tetracycline (TET) in serum and milk samples with a high recovery close to 100% and a low relative standard deviation (RSD) less than 5.0% is achieved by using this integrated analytical platform.

A novel synthetic strategy is presented for microfluidic preparation of programmable atom-like nanoparticles with high valences and high yields.     

Boosting the synthesis of value-added aromatics directly from syngas via a Cr2O3 and Ga doped zeolite capsule catalyst

Even though the transformation of syngas into aromatics has been realized via a methanol-mediated tandem process, the low product yield is still the bottleneck, limiting the industrial application of this technology. Herein, a tailor-made zeolite capsule catalyst with Ga doping and SiO₂ coating was combined with the methanol synthesis catalyst Cr₂O₃ to boost the synthesis of value-added aromatics, especially para-xylene, from syngas. Multiple characterization studies, control experiments, and density functional theory (DFT) calculation results clarified that Ga doped zeolites with strong CO adsorption capability facilitated the transformation of the reaction intermediate methanol by optimizing the first C–C coupling step under a high-pressure CO atmosphere, thereby driving the reaction forward for aromatics synthesis. This work not only reveals the synergistic catalytic network in the tandem process but also sheds new light on principles for the rational design of a catalyst in terms of oriented conversion of syngas.

The single-pass conversion of syngas into para-xylene was realized using a bifunctional catalyst Cr₂O₃/Ga-ZSM-5@SiO₂. The Ga species facilitates the methanol consumption process by C–C coupling optimization, enhancing the yield of the target aromatics.     

Tuning cell adhesion on gradient poly(2-hydroxyethyl methacrylate)-grafted surfaces

A simple yet versatile method was developed to prepare a low-density polymerization initiator gradient, which was combined with surface-initiated atom transfer radical polymerization (ATRP) to produce a well-defined poly(2-hydroxyethyl methacrylate) (HEMA) gradient substrate. A smooth variation in film thickness was measured across the gradient, ranging from 20 A to over 80 A, but we observed a nonmonotonic variation in water contact angle. Fits of X-ray reflectivity profiles suggested that at the low graft density end, the polymer chain structure was in a "mushroom" regime, while the polymer chains at high graft density were in a "brush" regime. It was found that the "mushroom" region of the gradient could be made adhesive to cells by adsorbing adhesion proteins, and cell adhesion could be tuned by controlling the density of the polymer grafts. Fibroblasts were seeded on gradients precoated with fibronectin to test cellular responses to this novel substrate, but it was found that cell adhesion did not follow the expected trend; instead, saturated cell adhesion and spreading was found at the low grafting density region.     

A membrane separation technique for optimizing sample preparation of MALDI-TOF MS detection

Here, we report a new method based on the combination of membrane separation technology and nanomaterial to rapid detection of peptides and protein with MALDI-TOF MS. This method shows advantages as it can inhibit the heterogeneous of sample spot and enhance the target molecular signal intensity.