Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.     

Synthesis of N-methyl-3-aza[10] paracyclophane: A rigid analog of phenethylamine

The synthesis of N-methyl-3-aza[10]paracyclophane is reported which represents the first example of this ring system being formed via an acyloin reaction. This 3-aza[10]paraeyclophane ring system behaves physiochemically inbetween the normal [9]- and [10]paracyclophane ring systems. Reductive desulfurization of N-methyl-3-aza[10]paracyclophane-6-ethylene thioketal in ethanol provides a small amount of the title compound and an unexpected, ring-opened product, N-ethyl-N-methyl-p-heptylphenethylamine. A possible mechanism for the ring-opening process is suggested.     

压缩X因子导数光谱法测定痕量锗

本采用压缩Ｘ因子导数光谱技术实现了宽峰体系灵敏度的大幅度提高，提出了测定痕量锗的方法。在０．７２ｍｏｌ／ＬＨ２ＳＯ４和３．０ｍｏｌ／ＬＨ３ＰＯ４的混酸介质中，锗－水杨基荧光酮－ＯＰ三元显色体系的压缩Ｘ因子四阶导数光谱摩尔响应系数达１．８９×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，灵敏度比常规光度法高１２．４倍；最低检测出限为０．０００３３ｍｇ／Ｌ，比常规光谱法低４倍；选择性也进一步提高，绝大多数离     

Synthesis, crystal structure and properties of K2Ta2S10: A novel ternary tantalum polysulfide with TaS8 polyhedra forming infinite anionic chains

The new ternary alkali tantalum polysulfide K₂Ta₂S₁₀ has been synthesized by reacting TaS₂ with an in situ formed melt of K₂S₃ and S at 773 K. The compound crystallizes with four formula units in the monoclinic space group P2₁/n (No. 14) with lattice parameters of . The structure contains two different zigzag chain anions [TaS₅]⁻, running parallel to the crystallographic b-axis separated by potassium cations. The two crystallographically independent tantalum atoms are in a distorted bi-capped trigonal prismatic environment of eight sulfur atoms which was never observed before. The TaS₈ polyhedra share three S atoms on each side to form the anionic chains. The compound was characterized with FIR and Raman spectroscopy.     

The reaction of 1,2-dilithiotetrafluorobenzene with group V halides

Although the arsenic containing analogue of triptycene, 5,10-$\text{o}$-benzenoarsanthrene $\text{A}$ (E=As) was isolated some time ago [1] the related derivatives of antimony and bismuth are unknown. We now find that when 1,2-diiodotetrafluorobenzene is treated with methyllithium at -78/dg, to afford the little studied dilithiotetrafluorobenzene [2], and the appropriate metal chloride is added to the resulting solution, perfluorinated analogues of $\text{A}$ (E = As, Sb, or Bi) are obtained in good yield. These are stable volatile solids.

     

Application of Iodide Ion Selective Electrode to the Study of Stepwise Formation Constant and Solubility Product of Lead Iodide

Iodide ion-selective electrode were studied, prepared and applied for the complex formations and solubility product determination. The thermodynamic formation constant of PbI⁺ and the solubility product of PbI₃ were found to be 54 and 9.2 × 10^?9, respectively. The formation constant of PbNO₃⁺ was calculated to be 4.6 from the different formation constant of PbI⁺ in perchlorate and nitrate media.     

Carbon anode materials from polysiloxanes for lithium ion batteries

Three kinds of silicon-containing disordered carbons have been prepared by pyrolysis of polysiloxanes with different amounts of phenyl side groups. X-ray powder diffraction, X-ray photoelectron spectroscopy and electrochemical capacity measurements were performed to study their behaviors. Graphite crystallites, micropores, and silicon species affect their electrochemical performances. All of them present high reversible capacities, >372 mAh/g. Since the graphite crystallites are very small, they contribute very little to reversible capacity. The number of micropores produced by gas emission during the heat-treatment process decides whether they exhibit reversible capacity. Si mainly exists in the form C–Si–O and influences the irreversible capacity. There is no evident capacity fading in the first ten cycles, indicating promising properties for these disordered carbons.     

用θ-2θ型衍射仪测定溶液结构的新方法

叙述了用θ－２θ型Ｘ射线衍射仪精确测定电解质溶液结构的新实验技术。设计制作了具有恒温功能的超厚液体样品池，并建立了样品池窗口强度的校正方法。优化了液体Ｘ射线衍射数据和结构参数精细化的计算机程序，获得了非常令人满意的实验结果。由θ－２θ型Ｘ射线衍射仪精确测定的径向分布函数与θ－θ型衍射仪自由散射比较，表明ＤＲＦ分辨率有所提高。     

Thermal and autoxidation reactions of poly-3-methylenecyclobutene and poly-1-methyl-3-methylenecyclobutene

The thermal ring-opening reactions, autoxidation and hydrogenation of polymethy-lenecyclobutene (PMCB) and poly-1-methyl-3-methylenecyclobutene (PMMCB), were investigated. Both polymers were prepared by cationic polymerization and consisted almost entirely of 1,5-repeating units containing cyclobutene rings in the polymer backbone. Both polymers showed well behaved exothermic processes at elevated temperatures which apparently resulted in crosslinking. These processes were investigated by differential scanning calorimetry and interpreted to involve thermal ring-opening reactions. Autoxidation occurred very rapidly in PMCB but much more slowly in PMMCB as predicted by Bolland's rules. Attempts to hydrogenate the cyclobutene rings in both polymers resulted in the occurrence of hydrogenolysis in PMCB and little or no reaction with PMMCB for a Pd-catalyzed reaction and partial hydrogenation of the latter for a diimide reaction.     

Differentiation and quantitation of isomeric dipeptides by low-energy dissociation of copper(II)-bound complexes

Application of the kinetic method based on the dissociation of transition metal centered cluster ions is extended from chiral analysis (Tao, W. A.; Zhang, D.; Nikolaev, E. N.; Cooks, R. G. J. Am. Chem. Soc. 2000, 122, 10598) to quantitative analysis of isomeric mixtures, including those with Leu/Ile substitutions. Copper(II)-bound complexes of pairs of peptide isomers are generated by electrospray ionization mass spectrometry and the trimeric complex [CuII(ref)2(A) - H]+ (analyte A, a mixture of isomeric peptides; reference compound ref, usually a peptide) is caused to undergo collisional dissociation. Competitive loss of the neutral reference compound or the neutral analyte yields two ionic products and the ratio of rates of the two competitive dissociations, viz. the product ion branching ratio R is shown to depend strongly on the regiochemistry of the analyte in the precursor [CuII(A)(ref)2 - H]+ complex ion. Calibration curves are constructed by relating the branching ratio measured by the kinetic method, to the isomeric composition of the mixture to allow rapid quantitative isomer analysis.