Large impact of particle size on insertion reactions. A case for anatase Li(x)TiO2

Insertion reactions are of key importance for Li ion and hydrogen storage materials and energy storage devices. The particle size dependence of insertion reactions has been investigated for lithiated anatase TiO2, revealing progressively increasing Li capacity and Li-ion solubility for decreasing particle sizes, strongly deviating from the expected Li-rich and Li-poor phase separation as occurs in the bulk material. The phase diagram alters significantly, changing the materials properties already at sizes as large as 40 nm. A rationale is found in the surface strain that occurs between the different intercalated phases, which becomes energetically too costly in small particles. In particular the observed particle size-induced solid solution behavior is expected to have fundamental and practical implications for two-phase lithium or hydrogen insertion reactions.     

New polymer structures based on vinyl ether polymerization

Sequential living cationic polymerization of octadecyl vinyl ether (ODVE) and methyl vinyl ether (MVE) was used for the preparation of amphiphilic ABA‐type block copolymers. The polymerization of ODVE was initiated with the trimethyl silyl iodide/1,1,3,3‐tetramethoxy propane/ZnI₂ system at 0°C in toluene. The living bifunctional polyODVE thus obtained was used as initiator for the polymerization of MVE. Below the LCST of polyMVE (37°C), the copolymers are amphiphiles. Above the LCST of polyMVE, the polyMVE‐blocks become hydrophobic and the amphiphilic nature of the block copolymer is lost. This was demonstrated by using the block copolymers as emulsifiers for water/decane mixtures. The emulsions were stable for several hours at room temperature, while the emulsion stability decreased to about 30 seconds at 40°C. PolyMVE‐α,ω‐bis‐methacrylates were obtained by end‐capping of living bifunctional polyMVE with 2‐hydroxyethyl methacrylate (HEMA). Copolymerization of these bis‐macromers with HEMA leads to segmented networks. The networks showed a reversible swelling/deswelling behavior in water as a function of temperature. This is caused by a change of the hydrophilicity of the polyMVE segments in the networks. Hexa(chloromethyl)melamine, combined with zinc chloride was found to be an efficient hexafunctional initiator for the living cationic polymerization of vinyl ethers. This simple initiating system opens new ways for the synthesis of endgroup‐functionalized star‐shaped poly(vinyl ethers).     

C?X⋅⋅⋅O Halogen Bonding: Interactions of Trifluoromethyl Halides with Dimethyl Ether

The formation of weakly bound molecular complexes between dimethyl ether (DME) and the trifluoromethyl halides CF₃Cl, CF₃Br and CF₃I dissolved in liquid argon and in liquid krypton is investigated, using Raman and FTIR spectroscopy. For all halides evidence is found for the formation of C? X???O halogen‐bonded 1:1 complexes. At higher concentrations of CF₃Br, a weak absorption due to a 1:2 complex is also observed. Using spectra recorded at temperatures between 87 and 125 K, the complexation enthalpies for the complexes are determined to be ?6.8(3) kJ mol^?1 (DME?CF₃Cl), ?10.2(1) kJ mol^?1 (DME?CF₃Br), ?15.5(1) kJ mol^?1 (DME?CF₃I), and ?17.8(5) kJ mol^?1 [DME(?CF₃Br)₂]. Structural and spectral information on the complexes is obtained from ab initio calculations at the MP2/ 6‐311++G(d,p) and MP2/6‐311++G(d,p)+LanL2DZ* levels. By applying Monte Carlo free energy perturbation calculations to account for the solvent influences, and statistical thermodynamics to estimate the zero‐point vibrational and thermal influences, the ab initio complexation energies are converted into complexation enthalpies for the solutions in liquid argon. The resulting values are compared with the experimental data deduced from the cryosolutions.     

Electrospray ionization quadrupole time-of-flight tandem mass spectrometric analysis of hexamethylenediamine-modified maltodextrin and dextran

A combined methodology for obtaining at the preparative scale and characterization by nanoelectrospray ionization (nanoESI) quadrupole time-of-flight (QTOF) mass spectrometry (MS) and tandem MS (MS/MS) of linear polysaccharides modified at the reducing end is presented. Two polydisperse maltodextrins (1000 and 3000 Da) and a high molecular weight polydisperse dextran (6000 Da) were coupled with hexamethylenediamine (HMD). The coupling products were analyzed by nanoESI-QTOF-MS in the positive ion mode and MS/MS using collision-induced dissociation (CID) at low energies. In the HMD-M1000 mixture, the polysaccharide chains containing from 2 to 8 Glc residues were detected, while in HMD-M3000 we identified a complete series of chains containing from 8 to 21 Glc moieties. The employed ESI conditions enhanced the detection of chains with up to 46 Glc residues in the HMD-D6000 sample. By optimized MS/MS, HMD-modified polysaccharides of 3, 4, 5, 12 and 46 degrees of polymerization yielded product ion spectra exhibiting the whole set of Y- and B-fragment ions. The MS structural data were obtained within a few minutes of signal acquisition, with a sample consumption situating the analysis sensitivity in the picomolar range.     

Dimethylammonium trichlorocuprate(II): structural transition, low-temperature crystal structure, and unusual two-magnetic chain structure dictated by nonbonding chloride-chloride contacts

Catena(dimethylammonium-bis(mu2-chloro)-chlorocuprate), (CH3)2NH2CuCl3, forms chains of Cu2Cl6(2-) bifold dimers linked along the structural chain axis by terminal chlorides forming long semicoordinate bonds to adjacent dimers. The structural chains are separated by dimethylammonium ions that hydrogen bond to chloride ions of the dimers. A structural phase transition below room temperature removes disorder in the hydrogen bonding, leaving adjacent dimers along the chain structurally and magnetically inequivalent, with alternating ferromagnetic and antiferromagnetic pairs. The coupled dimers are magnetically isolated from each other along the structural chain axis by the long semicoordinate Cu-Cl bond. However, the dimers couple to like counterparts on adjacent chains via nonbonding Cl...Cl contacts. The result is two independent magnetic chains, one an alternating antiferromagnetic chain and the other an antiferromagnetic chain of ferromagnetically coupled copper dimers, which run perpendicular to the structural chains. This magnetostructural analysis is used to fit unusual low-temperature (1.6 K) magnetization vs field data that display a two-step saturation. The structural phase transition is identified with neutron scattering and capacitance measurements, and the X-ray crystal structures are determined at room temperature and 84 K. The results appear to resolve long-standing confusion about the origins of the magnetic behavior of this compound and provide a compelling example of the importance of two-halide magnetic exchange.     

Rapid inorganic ion analysis using quantitative microchip capillary electrophoresis

Rapid quantitative microchip capillary electrophoresis (CE) for online monitoring of drinking water enabling inorganic ion separation in less than 15 s is presented. Comparing cationic and anionic standards at different concentrations the analysis of cationic species resulted in non-linear calibration curves. We interpret this effect as a variation in the volume of the injected sample plug caused by changes of the electroosmotic flow (EOF) due to the strong interaction of bivalent cations with the glass surface. This explanation is supported by the observation of severe peak tailing. Conducting microchip CE analysis in a glass microchannel, optimized conditions are received for the cationic species K+, Na+, Ca2+, Mg2+ using a background electrolyte consisting of 30 mmol/L histidine and 2-(N-morpholino)ethanesulfonic acid, containing 0.5 mmol/L potassium chloride to reduce surface interaction and 4 mmol/L tartaric acid as a complexing agent resulting in a pH-value of 5.8. Applying reversed EOF co-migration for the anionic species Cl-, SO42- and HCO3- optimized separation occurs in a background electrolyte consisting of 10 mmol/L 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) and 10 mmol/L HEPES sodium salt, containing 0.05 mmol/L CTAB (cetyltrimethylammonium bromide) resulting in a pH-value of 7.5. The detection limits are 20 micromol/L for the monovalent cationic and anionic species and 10 micromol/L for the divalent species. These values make the method very suitable for many applications including the analysis of abundant ions in tap water as demonstrated in this paper.     

Selenacalix[3]triazines: synthesis and host-guest chemistry

The heteracalixarene series (N/O/S) has been expanded with Se-bridged cyclotrimeric macrocycles. Selenacalix[3]triazines were synthesized by convenient one-pot nucleophilic aromatic substitution reactions and they showed peculiar supramolecular features. The N tridentate binding pocket was capable of coordinating both copper ions and anions.     

(Thio)ureido anion receptors based on a 1,3-alternate oxacalix[2]arene[2]pyrimidine scaffold

In pursuit of highly preorganized macrocyclic host molecules for the complexation of anions, a series of oxacalix[2]arene[2]pyrimidine-based bis(thio)ureido receptors were synthesized and fully characterized. The pincer-like 1,3-alternate conformation of the oxacalix[4]arene scaffold, essential for an efficient host-guest interaction, was visualized by single-crystal X-ray analysis and supported by variable-temperature NMR studies. The anion binding properties of the receptors were evaluated via (1)H NMR titration experiments, showing intermolecular interactions with H(2)PO(4)(-), AcO(-), BzO(-), and Cl(-) ions. The host molecule bearing 4-nitrophenyl substituents on the bisurea binding pocket showed association constants in the range of 200-400 M(-1) in the strongly competitive solvent mixture of DMSO/0.5% H(2)O.     

Living Polymerization via Anionic Initiation for the Synthesis of Well‐Defined PPV Materials

The anionic polymerization of PPV via the sulfinyl precursor route is further investigated. When LHMDS is employed as the base to form the actively propagating quinodimethane system and THF as the solvent, anionic polymerizations can be observed. With the use of tert‐ butyl‐substituted anionic initiators, specific functional groups can be built in the polymer chain and the chain length can be efficiently controlled, which is demonstrated here for the first time. With introduction of branched side chains on the aromatic core, soluble conjugated PPV material can be obtained with molecular weights in the range of 5000–16 000 g mol⁻¹.