Dynamic stability of rotor-bearing systems subjected to random axial forces

This paper investigates the lateral vibration of a spinning disk-shaft system supported by a pair of ball bearings and subjected to a pair of random axial forces at both ends. The axial forces are assumed as the sum of a static force and a random process with a zero mean. Due to the random axial forces, the rotor-bearing system may experience parametric random instability under certain situations. In this work, the finite element method is applied to yield a set of discretized system equations first. The set of discretized system equations is partially uncoupled by the modal analysis procedure suitable for gyroscopic systems. The stochastic averaging method is then adopted to obtain Ito's equations for the response amplitudes of the system. Finally the first- and second-moment stability criteria are utilized to determine the stability boundaries of the system. Numerical results show that the rotor-bearing system is always stable in the sense of the first-moment stability, and the effects of the average axial compressive force and the disk mass, which will lower all frequencies of the system, tend to destabilize the second-moment stability of the system.     

Sensitive determination of adenosine disodium triphosphate in soil,milk, and pharmaceutical formulation by enoxacin–europium (III) fluorescence complex in solution

A new spectroflurometric method for the determination of adenosine disodium triphosphate (ATP) is developed. Fluorometric interaction between ATP and enoxacin (ENX)–Eu³⁺ complex was studied using UV–vis and fluorescence spectroscopy. Weak luminescence spectra of Eu³⁺ were enhanced after complexation with ENX at 589 nm and 614 nm upon excitation at 395 nm due to energy transfer from the ligand to the lanthanide ion. It was observed that luminescence spectrum of Eu³⁺ was strongly enhanced further at 614 nm after incorporation of ATP into the ENX–Eu³⁺ complex. Under optimal conditions, the enhancement of luminescence at 614 nm was responded linearly with the concentration of ATP. The linearity was maintained in the range of 1.5×10^?10–1.15×10^?8 M (R=0.9973) with the limit of detection (3σ) of 4.71×10^?11 M. The relative standard deviation (RSD) for 9 repeated measurements of 1×10^?9  M ATP was 1.25%. Successful determinations of ATP in soil, milk, and a pharmaceutical formulation with the proposed method were demonstrated.     

Measurement of prompt charm meson production cross sections in pp collisions at square root s = 1.96 TeV

We report on measurements of differential cross sections dsigma/dp(T) for prompt charm meson production in ppmacr; collisions at sqrt[s]=1.96 TeV using 5.8+/-0.3 pb(-1) of data from the CDF II detector at the Fermilab Tevatron. The data are collected with a new trigger that is sensitive to the long lifetime of hadrons containing heavy flavor. The charm meson cross sections are measured in the central rapidity region |y|K-pi(+), D(*+)-->D0pi(+), D+-->K-pi(+)pi(+), D(+)(s)-->phipi(+), and their charge conjugates. The measured cross sections are compared to theoretical calculations.     

Memory effects in an interacting magnetic nanoparticle system

We have performed a series of measurements to study the low temperature dynamics of an interacting magnetic nanoparticle system. The results obtained demonstrate striking memory effects in the dc magnetization and magnetic relaxation that support the existence of a spin-glass-like phase in interacting magnetic nanoparticles. Moreover, we observe an asymmetric response with respect to temperature change that supports a hierarchical picture, rather than the droplet model discussed in other works on nanoparticle systems.     

Beam-polarization asymmetries for the p(gamma-->, K+)Lambda and p(gamma-->, K+)Sigma(0) reactions for E(gamma)=1.5-2.4 GeV

Beam polarization asymmetries for the p(gamma-->,K+)Lambda and p(gamma-->,K+)Sigma(0) reactions are measured for the first time for E(gamma)=1.5-2.4 GeV and 0.6相似文献   

Effects of Signal Spectrum Bandwidth on Different PMD Compensation Feedback Methods

We compared efficiencies of different PMD compensation feedback methods against transmission signal bandwidth,including NRZ, RZ, CRZ format under various duty cycles. We found that the critical factor determining the efficiency of PMD compensation is not the modulation format, but the spectral bandwidth of the transmission signal.     

Time-domain numerical computation of noise reduction by diffraction and finite impedance of barriers

A new time-domain numerical method is presented for the estimation of noise reduction by the diffraction and finite impedance of barriers. High order finite difference schemes conventionally used for computational aeroacoustics, and time-domain impedance boundary conditions are utilized for the development of the time-domain method. Compared with other methods, this method can be applied more easily to the problems related to nonlinear noise propagation such as impulsive noise and broadband noise. Linearized Euler equations in Cartesian co-ordinates are considered and solved numerically. Straight and T-shaped barriers with and without surface admittance are calculated. In order to assess the accuracy of this time-domain method, comparison with the results of SYSNOISE software (Ver. 5.3) are made. There are very good agreements between the results of the present time-domain numerical method and the boundary element method of the SYSNOISE software.     

Periodic orbits, damped transitions and targeted energy transfers in oscillators with vibro-impact attachments

We study complex damped and undamped dynamics and targeted energy transfers (TETs) in systems of coupled oscillators, consisting of single-degree-of-freedom primary linear oscillators (LOs) with vibro-impact attachments, acting, in essence, as vibro-impact nonlinear energy sinks (VI NESs). First, the complicated dynamics of such VI systems is demonstrated by computing the VI periodic orbits of underlying Hamiltonian systems and depicting them in appropriate frequency–energy plots (FEPs). Then, VI damped transitions and distinct ways of passive TETs from the linear oscillators to the VI attachments for various parameter ranges and initial conditions are investigated. As in the case of smooth stiffness nonlinearity [Y. Lee, G. Kerschen, A. Vakakis, P. Panagopoulos, L. Bergman, D.M. McFarland, Complicated dynamics of a linear oscillator with a light, essentially nonlinear attachment, Physica D 204 (1–2) (2005) 41–69], both fundamental and subharmonic TET can be realized in the VI systems under consideration. It is found that the most efficient mechanism for VI TET is through the excitation of highly energetic VI impulsive orbits (IOs), i.e., of periodic or quasiperiodic orbits corresponding to zero initial conditions except for the initial velocities of the linear oscillators. In contrast to NESs with smooth essential nonlinearities considered in previous works, VI NESs are capable of passively absorbing and locally dissipating significant portions of the energies of the primary systems to which they are attached, at fast time scale. This renders such devices suitable for applications, like seismic mitigation, where dissipation of vibration energy in the early, highly energetic regime of the motion is a critical requirement.     

Simple model for frozen-in viscoelastic stress in optical fibers

We have measured residual stress in a commercial single mode optical fiber and observed its relaxation in an annealing process with a polariscopic stress measurement method. After annealing the fiber for an hour at various high temperatures in a specially made image furnace we have measured the temperature dependent relaxation of frozen-in viscoelastic stress in the fiber. We have proposed a simple physical model to explain recently observed relaxation of frozen-in viscoelastic stress in optical fibers based on the Kelvin-Voigt model of viscoelastic materials. The experimental results are explained with our model of frozen-in viscoelastic stress by introducing simplified four-step procedures for fiber drawing.