Target fragmentation in proton-nucleus and16O-nucleus reactions at 60 and 200 GeV/nucleon

Target remnants withZ<3 from proton-nucleus and¹⁶O-nucleus reactions at 60 and 200 GeV/nucleon were measured in the angular range from 30° to 160° (?1.7<η<1.3) employing the Plastic Ball detector. The excitation energy of the target spectator matter in central oxygen-induced collisions is found to be high enough to allow for complete disintegration of the target nucleus into fragments withZ<3. The average longitudinal momentum transfer per proton to the target in central collisions is considerably higher in the case of¹⁶O-induced reactions (≈300 MeV/c) than in proton-induced reactions (≈130 MeV/c). The baryon rapidity distributions are roughly in agreement with one-fluid hydrodynamical calculations at 60 GeV/nucleon¹⁶O+Au but are in disagreement at 200 GeV/nucleon, indicating the higher degree of transparency at the higher bombarding energy. Both, the transverse momenta of target spectators and the entropy produced in the target fragmentation region are compared to those attained in head-on collisions of two heavy nuclei at Bevalac energies. They are found to be comparable or do even exceed the values for the participant matter at beam energies of about 1–2 GeV/nucleon.     

An adjustable approach to fuzzy soft set based decision making

Molodtsov’s soft set theory was originally proposed as a general mathematical tool for dealing with uncertainty. Recently, decision making based on (fuzzy) soft sets has found paramount importance. This paper aims to give deeper insights into decision making based on fuzzy soft sets. We discuss the validity of the Roy-Maji method and show its true limitations. We point out that the choice value designed for the crisp case is no longer fit to solve decision making problems involving fuzzy soft sets. By means of level soft sets, we present an adjustable approach to fuzzy soft set based decision making and give some illustrative examples. Moreover, the weighted fuzzy soft set is introduced and its application to decision making is also investigated.     

Group-specific stochastic production frontier models with parametric specifications

This paper develops a stochastic frontier model that not only focuses more on group-specific temporal variations in technical efficiency rather than individual temporal variations, but also allows for a parametric function of the time-varying coefficient of the efficiency factor. We derived the concentrated least squares estimator and its asymptotic properties. When applied to the Penn World data set, the group-specific models yield much more variation in the temporal patterns of efficiency across countries. This application demonstrates the feasibility of applying a group-specific stochastic frontier model with a parametric function of temporal pattern to a real empirical analysis.     

Observation of large CP violation in the neutral B meson system

We present a measurement of the standard model CP violation parameter sin2 phi(1) based on a 29.1 fb(-1) data sample collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. One neutral B meson is fully reconstructed as a J/psi K(S), psi(2S)K(S), chi(c1)K(S), eta(c)K(S), J/psi K(L), or J/psi K(*0) decay and the flavor of the accompanying B meson is identified from its decay products. From the asymmetry in the distribution of the time intervals between the two B meson decay points, we determine sin2 phi(1) = 0.99+/-0.14(stat)+/-0.06(syst). We conclude that we have observed CP violation in the neutral B meson system.     

Crystallinity and morphology dependent luminescence of Li-doped Y2−xGdxO3:Eu thin film phosphors

The influence of lithium doping on the crystallization, the surface morphology, and the luminescent properties of pulsed laser deposited Y_2−xGd_xO₃:Eu³⁺ thin film phosphors was investigated. The crystallinity, the surface morphology, and the photoluminescence (PL) of films depended highly on the Li-doping and the Gd content. The relationship between the crystalline and morphological structures and the luminescent properties was studied, and Li⁺ doping was found to effectively enhance not only the crystallinity but also the luminescent brightness of Y_2−xGd_xO₃:Eu³⁺ thin films. In particular, the incorporation of Li and Gd into the Y₂O₃ lattice could induce remarkable increase in the PL. The highest emission intensity was observed Li-doped Y_1.35Gd_0.6O₃:Eu³⁺ thin films whose brightness was increased by a factor of 4.6 in comparison with that of Li-doped Y₂O₃:Eu³⁺ thin films.     

Efficient 1645-nm Er:YAG laser

We report a resonantly fiber-laser-pumped Er:YAG laser operating at the eye-safe wavelength of 1645 nm, exhibiting 43% optical efficiency and 54% incident slope efficiency and emitting 7-W average power when repetitively Q switched at 10 kHz. To our knowledge, this is the best performance (conversion efficiency and average power) obtained from a bulk solid-state Q-switched erbium laser. At a 1.1-kHz pulse repetition frequency the laser produces 3.4-mJ pulses with a corresponding peak power of 162 kW. Frequency doubling to produce 822.5-nm, 4.7-kW pulses at 10 kHz was performed to demonstrate the laser's utility.     

High-speed horizontal-path atmospheric turbulence correction with a large-actuator-number microelectromechanical system spatial light modulator in an interferometric phase-conjugation engine

Results of atmospheric propagation for a high-speed, large-actuator-number adaptive optics system are presented. The system uses a microelectromechanical system- (MEMS-) based spatial light modulator correction device with 1024 actuators. Tests over a 1.35-km path achieved correction speeds in excess of 800 Hz and Strehl ratios close to 0.5. The wave-front sensor was based on a quadrature interferometer that directly measures phase. This technique does not require global wave-front reconstruction, making it relatively insensitive to scintillation and phase residues. The results demonstrate the potential of large-actuator-number MEMS-based spatial light modulators to replace conventional deformable mirrors.     

Structure,transport and magnetic properties of the double perovskite (Ca<Subscript>2-2x</Subscript>Sr<Subscript>2x</Subscript>)FeMoO<Subscript>6</Subscript>

In this paper we report the results of a detailed investigation of the double perovskite (Ca_2-2xSr_2x)FeMoO₆ system. Chemical size effects on structural, electrical, and magnetic properties caused by the substitution of isovalent, larger Sr ions into the smaller Ca sites, resulting in (Ca_2-2xSr_2x)FeMoO₆, have been examined. The compounds crystallize in the monoclinic space group P2₁/n for 0.0x<0.2, the orthorhombic space group Pbnm for 0.2x<0.4, and the tetragonal space group I4/m and I4/mmm for x0.4. Examination of the resistivity of all compounds reveals a metallic behavior which is well described by a Tⁿ dependence except for x=1.0. These n values change from 1 to 2 as T decreases lower than T_c. This is indicative of a variation in the transport mechanism at T_c. The ferrimagnetic transition temperature T_c increases with increasing x from 318 (x=0.0) to 393 K (x=1.0). For all samples, the saturation magnetization at 82 K obeys M_s3.5_B/(formula unit), compared to a theoretical spin-only moment of 4_B/(formula unit) for a perfectly ordered compound. PACS 74.25.Fy; 74.25.Ha     

Two-dimensional poroelastic acoustical foam shape design for absorption coefficient maximization by topology optimization method

Optimal shape design of a two-dimensional poroelastic acoustical foam is formulated as a topology optimization problem. For a poroelastic acoustical system consisting of an air region and a poroelastic foam region, two different physical regions are continuously changed in an iterative design process. To automatically account for the moving interfaces between two regions, we propose a new unified model to analyze the whole poroelastic acoustical foam system with one set of governing equations; Biot's equations are modified with a material property interpolation from a topology optimization method. With the unified analysis model, we carry out two-dimensional optimal shape design of a poroelastic acoustical foam by a gradient-based topology optimization setting. The specific objective is the maximization of the absorption coefficient in low and middle ranges of frequencies with different amounts of a poroelastic material. The performances of the obtained shapes are compared with those of well-known wedge shapes, and the improvement of absorption is physically interpreted.     

Kahweol inhibits adipogenesis of 3T3-L1 adipocytes through downregulation of PPARγ

Kahweol, a compound from Coffea arabica, possesses antioxidant, anti-inflammatory, and antitumour properties. However, an anti-adipogenic effect has not yet been reported. In this study, we have shown that kahweol has an anti-adipogenic effect on 3T3-L1 adipocytes. Kahweol significantly inhibited the differentiation of intracellular lipid accumulation in 3T3-L1 adipocytes, without being cytotoxic. It also downregulated the expression of adipogenesis-related gene, including an adipocytokine, adiponectin. This anti-adipogenic effect stems from an ability to inhibit key adipogenic regulators, including PPARγ and C/EBPα. These results demonstrate that kahweol significantly inhibits the differentiation of 3T3-L1 cells, and suggest that it has potential as a novel anti-obesity treatment.