Solvent and pH Effects on the Fluorescence of 7-(Dimethylamino)-2-Fluorenesulfonate

A novel water-soluble solvatochromic molecule, 7-(dimethylamino)-2-fluorenesulfonate (2,7-DAFS), was prepared by a three-step reaction from 2-nitrofluorene in good overall yield. The pH and solvent effects on the UV-VIS absorption and fluorescence spectra of 2,7-DAFS have been studied. Protonation of the dimethylamino group switches the absorption from intramolecular charge-transfer (ICT) to π → π* transition. The ground state pKa value of 2,7-DAFS was determined as 4.51. The fluorescence spectrum of the excited basic form, *(DAFS), shows a structureless single band with a large Stokes shift, whereas that of the acidic form, *(⁺HDAFS), exhibits a structured band with a small Stokes shift. The emission intensities of the basic and acidic forms versus pH/Ho plots show stretched sigmoidal curves and indicate that (1) the rate of deprotonation of *(⁺HDAFS) is comparable to the fluorescence decay of the species, and (2) the efficient proton-induced quenching of *(DAFS) fluorescence occurs. The pKa* was estimated as −1.7 from the fluorescence titration curve. The fluorescence maximum of *(DAFS) is blue-shifted as the polarity of solvent decreases. However, no clear dependency of the emission intensity and spectral half width, and thus fluorescence quantum yield, on the solvent polarity was revealed. It appears that the fluorescence sensitivity of 2,7-DAFS is 15 ∼ 25 times greater than the sensitivity of a widely utilized fluorescent probe, 5-(dimethylamino)-1-naphthalenesulfonate. This higher sensitivity, together with the ease of derivatization, would provide the fluorene-based fluorescent molecules significant advantages for a variety of applications.     

Micromorphology of epicuticular wax structures of the garden strawberry leaves by electron microscopy: Syntopism and polymorphism

Ultrastructural aspects of leaf epicuticular wax structures were investigated in the garden strawberry Fragaria × ananassa by scanning and transmission electron microscopy. Both the adaxial and abaxial surfaces of two cultivars (Maehyang and Red Pearl) were collected and subjected to surface observations and ultrathin sections. The most prominent leaf epicuticular wax structures included membraneous platelets and angular rodlets. Most wax platelets were membraneous, and appeared to protrude from the surface at an acute angle. Angular rodlets were usually bent and had rather distinct facets in the abaxial surface of the two cultivars. Membraneous platelets were predominant on the adaxial surface of Maehyang, whereas the adaxial surface of Red Pearl was characterized by angular rodlets. However, both cultivars possessed angular rodlets on the abaxial surface, simultaneously. The combination of air-drying without vacuum and in-lens imaging of secondary electron signals with a field emission gun could impart the superb resolution at low electron dose with minimal specimen shrinkage. In vertical profiles of the leaf epidermis, epicuticular waxes were observed above the cuticle layer, and measured approximately as 50 nm in thickness. The natural epicuticular waxes were seemingly mixtures of electron-dense microfibrils, and heterogeneous in shape on ultrathin sections. Distinct crystal-like strata could be hardly discernable in the wax structures. These results suggest that the garden strawberry has the nature of syntopism within one plant and polymorphism within the same species in the formation and occurrence of leaf epicuticular waxes.     

Subcentimeter depth resolution using a single-photon counting time-of-flight laser ranging system at 1550 nm wavelength

We demonstrate subcentimeter depth profiling at a stand off distance of 330 m using a time-of-flight approach based on time-correlated single-photon counting. For the first time to our knowledge, the photon-counting time-of-flight technique was demonstrated at a wavelength of 1550 nm using a superconducting nanowire single-photon detector. The performance achieved suggests that a system using superconducting detectors has the potential for low-light-level and eye-safe operation. The system's instrumental response was 70 ps full width at half-maximum, which meant that 1 cm surface-to-surface resolution could be achieved by locating the centroids of each return signal. A depth resolution of 4 mm was achieved by employing an optimized signal-processing algorithm based on a reversible jump Markov chain Monte Carlo method.     

Nonhost-associated proliferation of intrahyphal hyphae of citrus scab fungus Elsinoe fawcettii: refining the perception of cell-within-a-cell organization

Ultrastructural aspects of intrahyphal hyphae formation were investigated in Elsinoe fawcettii by transmission electron microscopy. Desiccated and hydrated cultures of E. fawcettii hyphae in liquid and solid media were prepared to determine the effects of water/nutrient availability and media fluidity on the formation of intrahyphal hyphae of the fungus. In all the culture conditions, intrahyphal hyphae were observed in enclosing hyphae. Electron-transparent hyphal cell walls clearly delimited intrahyphal hyphae from the cytoplasm of enclosing hyphae. Intrahyphal hyphae occupied most of the lumen of the enclosing hyphae, and showed intact hyphal cytoplasm with distinct organelles and inclusions. Intrahyphal hyphae were found to grow out of the degenerated hyphae that were almost devoid of cellular contents (simple intrahyphal hyphae). Some intrahyphal hyphae appeared to push aside a septum and passed into the adjacent hyphal cell. Besides a single intrahyphal hypha, instances were noted where enclosing hyphae contained several individual intrahyphal hyphae (multiple intrahyphal hyphae). Other enclosing hyphae contained intrahyphal hyphae, which also had intrahyphal hyphae (compound intrahyphal hyphae). The cell wall of intrahyphal hyphae showed the continuity with the cell wall of the enclosing hyphae. Concentric bodies typical of ascomycetes occurring in dry habitats were not found in all the types of hyphae. These results suggest that intrahyphal hyphae formation of E. fawcettii does not require plant defense responses. The fungus is thought to form intrahyphal hyphae during the saprophytic phase in ex planta ecological niches as well as the parasitic phase in host parts.     

Miscibility in a ternary system of poly(ether imide) with semicrystalline poly(ethylene terephthalate) and poly(butylene terephthalate)

A rare case of thermodynamic miscibility has been demonstrated in the amorphous state (quenched glass as well as molten state) of a ternary blend system formed by poly(ether imide) and semicrystalline poly(ethylene terephthalate) and poly-(butylene terephthalate). A single glass transition temperature (T_g) in the ternary blends was observed using differential scanning calorimetry and dynamic mechanical analysis.     

Soft‐Chemical Exfoliation Route to Layered Cobalt Oxide Monolayers and Its Application for Film Deposition and Nanoparticle Synthesis

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau‐like height profile with nanometer‐level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross‐confirmed by X‐ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in‐plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected‐area electron diffraction and Co K‐edge X‐ray absorption near‐edge structure analysis. The zeta‐potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of ≈10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.     

Cone-shaped structures of GeO2 fabricated by a thermal evaporation process

We have synthesized cone-like GeO₂ structures via thermal heating of Ge powders. We have investigated the effects of substrate temperature on the sample morphology, revealing that cone-shaped structures are preferentially obtained at higher temperature. The cone-shaped structures, which gradually become thinner to form a sharp tip, appear to be a single-crystalline, hexagonal structure of GeO₂. Room-temperature photoluminescence measurement revealed two emission peaks, at about 2.78 and 3.04 eV.     

Operational features and microwave characteristics of the VircatorII experiment

The Vircator II oscillating virtual-cathode microwave source operates with diode voltages between 600 and 800 kV and diode current between 50 and 120 kA. Maximal microwave output power between 200 and 500 MW is achieved when the diode aspect ratio, cathode surface, charge voltage, and extraction coupling are arranged to simultaneously (1) maximize diode voltage, (2) satisfy magnetic insulation criteria, (3) avoid nonuniform or unstable electron emission, and (4) optimize microwave transmission from the virtual cathode to the launching antenna. Broadband radiation between 0.4 and 5.5 GHz is generated. The central frequency follows the beam plasma frequency. It is tuned by varying the current density with anode-cathode gap adjustments     

Chemical and Electrochemical Lithiation of van der Waals Tetrel-Arsenides

Lithiation of van der Waals tetrel-arsenides, GeAs and SiAs, has been investigated. Electrochemical lithiation demonstrated large initial capacities of over 950 mAh g⁻¹ accompanied by rapid fading over successive cycling in the voltage range 0.01–2 V. Limiting the voltage range to 0.5–2 V achieved more stable cycling, which was attributed to the intercalation process with lower capacities. Ex situ powder X-ray diffraction confirmed complete amorphization of the samples after lithiation, as well as recrystallization of the binary tetrel-arsenide phases after full delithiation in the voltage range 0.5–2 V. Solid-state synthetic methods produce layered phases, in which Si-As or Ge-As layers are separated by Li cations. The first layered compounds in the corresponding ternary systems were discovered, Li_0.9Ge_2.9As_3.1 and Li₃Si₇As₈, which crystallize in the Pbam (No. 55) and P2/m (No. 10) space groups, respectively. Semiconducting layered GeAs and SiAs accommodate the extra charge from Li cations through structural rearrangement in the Si-As or Ge-As layers and eventually by replacement of the tetrel dumbbells with sets of Li atoms. Ge and Si monoarsenides demonstrated high structural flexibility and a mild ability for reversible lithiation.