Sonochemical synthesis and characterization of nano-sized lead(II) 3D coordination polymer: Precursor for the synthesis of lead(II) oxybromide nanoparticles

Nanoparticles of a three-dimensional coordination polymer, [Pb(L)(μ₂-Br)(H₂O)]_n (1), (L^? = 1H-1,2,4-triazole-3-carboxylate), have been synthesized by an ultrasonic method and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. The thermal stability of compound 1 both its bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal (DTA) analyses and compared each other. Concentration of initial reagents effects and the role of power ultrasound irradiation on size and morphology of nano-structured compound 1, have been studied. Calcination of the compound 1 at 500 °C under air atmosphere yields Pb₃O₂Br₂ nanoparticles.     

Electrical and electrochemical properties of molten salt-synthesized Li4Ti5−xSnxO12 (x=0.0, 0.05 and 0.1) as anodes for Li-ion batteries

Submicron-sized polyhedral Li₄Ti_5−xSn_xO₁₂ (x=0.0, 0.05, and 0.1) materials were successfully prepared by a single-step molten salt method. The structural, morphological, transport and electrochemical properties of the Li₄Ti_5−xSn_xO₁₂ were studied. X-ray diffraction patterns showed the formation of a cubic structure with a lattice constant of 8.31 Å, and the addition of dopants follows Vegard's law. Furthermore, FT-IR spectra revealed symmetric stretching vibrations of octahedral groups of MO₆ lattice in Li₄Ti₅O₁₂. The formation of polyhedral submicron Li₄Ti_5−xSn_xO₁₂ particles was inferred from FE-SEM images, and a particle size reduction was observed for Sn-doped Li₄Ti₅O₁₂. The chemical composition of Ti, O and Sn was verified by EDAX. The DC electrical conductivity was found to increase with increasing temperature, and a maximum conductivity of 8.96×10⁻⁶ S cm⁻¹ was observed at 200 °C for Li₄Ti₅O₁₂. The galvanostatic charge–discharge behavior indicates that the Sn-doped Li₄Ti₅O₁₂ could be used as an anode for Li-ion batteries due to its enhanced electrochemical properties.     

Effect of strain and nonparabolicity on interband transition energies of InAs/GaAs coupled double quantum dots

Strained potential profiles and electronic subband energies of InAs/GaAs coupled double quantum dots (DQDs) were calculated by using a three-dimensional finite-difference method (FDM) taking into account shape-based strain and nonparabolic effects. The interband transition energies from the ground electronic subband to the ground heavy-hole band (E₁-HH₁) in the InAs/GaAs DQDs, as determined from the FDM calculations taking into account strain and nonparabolic effects, were in reasonable agreement with the experimental peaks corresponding to the (E₁-HH₁) interband transition energies at several temperatures, as determined from the temperature-dependent photoluminescence spectra.     

Time-domain numerical computation of noise reduction by diffraction and finite impedance of barriers

A new time-domain numerical method is presented for the estimation of noise reduction by the diffraction and finite impedance of barriers. High order finite difference schemes conventionally used for computational aeroacoustics, and time-domain impedance boundary conditions are utilized for the development of the time-domain method. Compared with other methods, this method can be applied more easily to the problems related to nonlinear noise propagation such as impulsive noise and broadband noise. Linearized Euler equations in Cartesian co-ordinates are considered and solved numerically. Straight and T-shaped barriers with and without surface admittance are calculated. In order to assess the accuracy of this time-domain method, comparison with the results of SYSNOISE software (Ver. 5.3) are made. There are very good agreements between the results of the present time-domain numerical method and the boundary element method of the SYSNOISE software.     

Preparation and luminescence properties of SrTiO3:Pr,Al phosphor from the glycolate method

Spherical SrTiO₃:Pr³⁺,Al³⁺ phosphor with high crystallinity and uniform particle size distribution was formed from the glycolate precursor. The glycolate precursor was obtained by heating the mixed solution of metallic nitrates and titanium oxychloride in ethylene glycol up to 200 °C. The thermal decomposition of the glycolate precursor proceeded through three major stages, i.e., (i) evolution of glycols (∼200 °C), (ii) decomposition of glycolate precursor, and (iii) decomposition of strontium carbonate and crystallization of SrTiO₃:Pr³⁺,Al³⁺ phosphor.SrTiO₃:Pr³⁺,Al³⁺ phosphor exhibited a strong red emission, peaking at about 617 nm. SrTiO₃:Pr³⁺,Al³⁺ phosphor obtained from the glycolate complex has higher luminescent properties than the conventional solid state reaction and the Pechini method in terms of photoluminescence (PL) and cathodoluminescence (CL). High crystallinity, low residual carbon content and small grain size with uniform shape would enhance the luminescence intensity of phosphor by the glycolate method due to high surface area per unit volume and low organic content compared with the Pechini method. Also, Al³⁺ ion is more effective than Ga³⁺ ion to enhance PL intensity of SrTiO₃:Pr³⁺,Al³⁺ phosphor because of smaller Al³⁺ ion radius. Therefore, the glycolate method has been demonstrated to be a convenient and unique process for the production of muticomponent oxide with smaller grain size and higher crystallinity compared with the conventional mixed oxide reaction and the polymer precursor method.     

Agglomeration,sedimentation, and cellular toxicity of alumina nanoparticles in cell culture medium

The cytotoxicity of alumina nanoparticles (NPs) was investigated for a wide range of concentration (25–200 μg/mL) and incubation time (0–72 h) using floating cells (THP-1) and adherent cells (J774A.1, A549, and 293). Alumina NPs were gradually agglomerated over time although a significant portion of sedimentation occurred at the early stage within 6 h. A decrease of the viability was found in floating (THP-1) and adherent (J774A.1 and A549) cells in a dose-dependent manner. However, the time-dependent decrease in cell viability was observed only in adherent cells (J774A.1 and A549), which is predominantly related with the sedimentation of alumina NPs in cell culture medium. The uptake of alumina NPs in macrophages and an increased cell-to-cell adhesion in adherent cells were observed. There was no significant change in the viability of 293 cells. This in vitro test suggests that the agglomeration and sedimentation of alumina NPs affected cellular viability depending on cell types such as monocytes (THP-1), macrophages (J774A.1), lung carcinoma cells (A549), and embryonic kidney cells (293).     

Uniform Drug Loading into Prefabricated Microparticles by Freeze‐Drying

Microparticle‐based drug delivery is a promising technology for small volume bioassay platforms. The general utilization of the drug‐loaded microparticles in the in vitro bioassay platforms requires the drug loading method, which should impregnate the general drug types (e.g., water insoluble) with high payload into the variously designed microparticles. Loading the drug into the prefabricated microparticles using solvent evaporation satisfies the requirement. However, similar to the “coffee‐ring effect,” drugs are loaded in a seriously nonuniform manner, caused by the capillary flow during the evaporation process. Here, it is presented that the freeze‐drying is an efficient way to load uniform and high amount of the drug into the prefabricated microparticles. It is demonstrated that freezing solvent can block the capillary flow during the solvent removal process, improving the loading uniformity. The delivered amount of drugs is linearly proportional to the initial loading amount of drugs. Also, this drug loading method is shown to be applied to the various drug types and the prefabricated microparticles with different properties. Considering many challenges to suppress the “coffee‐ring effect” that induces nonuniform impregnation/deposition, the proposed concept can be applied not only for microparticle‐based drug delivery but also for uniform coating applications (e.g., thin‐film coating, DNA/protein microarray).     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.